Design of robust binary film onto carbon surface using diazonium electrochemistry

The electroreduction of functionalized aryldiazonium salts combined with a protection-deprotection method was evaluated for the fabrication of organized mixed layers covalently bound onto carbon substrates. The first modification consists of the grafting of a protected 4-((triisopropylsilyl)ethynyl)benzene layer onto the carbon surface on which the introduction of a second functional group is possible without altering the first grafted functional group. After deprotection, we obtained an ultrathin robust layer presenting high densities of both active ethynylbenzene groups (available for "click" chemistry) and the second functional group. The strategy was successfully demonstrated using azidomethylferrocene to react with ethynyl moieties in the binary film by "click" chemistry, and NO(2)-phenyl as the second functional group. Two possible modification pathways with different orderings of the various steps were considered to show the influence and importance of the protection-deprotection process on the final surface obtained. Using mild conditions for the grafting of the second layer maintains a concentration of active ethynyl groups similar to that obtained for a one-component monolayer while achieving a high surface concentration of the second modifier. Considering the wide range of functional aryldiazonium salts that could be electrodeposited onto carbon surfaces and the versatility and specificity of the "click" chemistry, this approach appears very promising for the preparation of mixed layers in well-controlled conditions without altering the reactivity of either functional group.     

Design and characterization of bi-soft segmented polyurethane microparticles for biomedical application

Bi-soft segmented poly(ester urethane urea) microparticles were prepared and characterized aiming a biomedical application. Two different formulations were developed, using poly(propylene glycol), tolylene 2,4-diisocyanate terminated pre-polymer (TDI) and poly(propylene oxide)-based tri-isocyanated terminated pre-polymer (TI). A second soft segment was included due to poly(?-caprolactone) diol (PCL). Infrared spectroscopy, used to study the polymeric structure, namely its H-bonding properties, revealed a slightly higher degree of phase separation in TDI-microparticles. TI-microparticles presented slower rate of hydrolytic degradation, and, accordingly, fairly low toxic effect against macrophages. These new formulations are good candidates as non-biodegradable biomedical systems.     

Gemifloxacin mesylate (GFM) stability evaluation applying a validated bioassay method and in vitro cytotoxic study

The validation of a microbiological assay applying the cylinder-plate method to determine the quinolone gemifloxacin mesylate (GFM) content is described. Using a strain of Staphylococcus epidermidis ATCC 12228 as the test organism, the GFM content in tablets at concentrations ranging from 0.5 to 4.5 μg mL⁻¹ could be determined. A standard curve was obtained by plotting three values derived from the diameters of the growth inhibition zone. A prospective validation showed that the method developed is linear (r = 0.9966), precise (repeatability and intermediate precision), accurate (100.63%), specific and robust. GFM solutions (from the drug product) exposed to direct UVA radiation (352 nm), alkaline hydrolysis, acid hydrolysis, thermal stress, hydrogen peroxide causing oxidation, and a synthetic impurity were used to evaluate the specificity of the bioassay. The bioassay and the previously validated high performance liquid chromatographic (HPLC) method were compared using Student's t test, which indicated that there was no statistically significant difference between these two validated methods. These studies demonstrate the validity of the proposed bioassay, which allows reliable quantification of GFM in tablets and can be used as a useful alternative methodology for GFM analysis in stability studies and routine quality control. The GFM reference standard (RS), photodegraded GFM RS, and synthetic impurity samples were also studied in order to determine the preliminary in vitro cytotoxicity to peripheral blood mononuclear cells. The results indicated that the GFM RS and photodegraded GFM RS were potentially more cytotoxic than the synthetic impurity under the conditions of analysis applied.     

Stability-indicating LC assay for butenafine hydrochloride in creams using an experimental design for robustness evaluation and photodegradation kinetics study

A stability-indicating liquid chromatography method for the determination of the antifungal agent butenafine hydrochloride (BTF) in a cream was developed and validated using the Plackett-Burman experimental design for robustness evaluation. Also, the drug photodegradation kinetics was determined. The analytical column was operated with acetonitrile, methanol and a solution of triethylamine 0.3% adjusted to pH 4.0 (6:3:1) at a flow rate of 1 mL/min and detection at 283 nm. BTF extraction from the cream was done with n-butyl alcohol and methanol in ultrasonic bath. The performed degradation conditions were: acid and basic media with HCl 1M and NaOH 1M, respectively, oxidation with H(2)O(2) 10%, and the exposure to UV-C light. No interference in the BTF elution was verified. Linearity was assessed (r(2) = 0.9999) and ANOVA showed non-significative linearity deviation (p > 0.05). Adequate results were obtained for repeatability, intra-day precision, and accuracy. Critical factors were selected to examine the method robustness with the two-level Plackett-Burman experimental design and no significant factors were detected (p > 0.05). The BTF photodegradation kinetics was determined for the standard and for the cream, both in methanolic solution, under UV light at 254 nm. The degradation process can be described by first-order kinetics in both cases.     

Thermal Behavior of Sr(II) and Ba(II)‐Diclofenac Complexes in Solid State: Study of the Dehydration and Thermal Decomposition

Solid state compounds of general formula Sr(Diclof)₂·5.7H₂O and Ba(Diclof)₂·4.8H₂O were obtained. Thermogravimetry (TG), differential scanning calorimetry (DSC), X‐ray diffraction powder patterns and microscopy analysis were used to characterize these compounds. Details concerning the dehydration and thermal decomposition as well as data of kinetic parameters have been described here. The kinetic behaviors of these stages were evaluated from several heating rates with samples masses of 2 and 5 mg in open crucibles under a nitrogen atmosphere. The results of the present study improve the knowledge on these compounds including their dehydration and thermal stability. The obtained data depend on the mass of the sample which results in two kinetic behavior patterns.     

Stereochemical dependence of 3JCH coupling constants in 2-substituted 4-t-butyl-cyclohexanone and their alcohol derivatives

Theoretical and experimental studies on (3)J(C2H6eq) NMR spin-spin coupling constants in both the 2-X-4-t-butyl-cyclohexanone (X = H, CH(3), F, Cl, and Br) and in their alcohol derivatives series are reported. Results thus found are rationalized in terms of the transmission of the Fermi contact contribution to such couplings. To this end, dependencies of (3)J(C2H6eq) couplings versus the C(2)-C(1)-C(6) angle are compared in both series for equatorial and axial X orientations. The main trend is described in terms of the rear lobes interaction. Besides, for X = halogen atom in equatorial orientation a rather strong interaction between oxygen and halogen lone pairs is observed, and its influence on (3)J(C2H6eq) couplings is discussed and rationalized in terms of different Fermi contact transmission pathways.     

Alkyl group effect on the conformational isomerism of trans-2-bromoalkoxycyclohexanes analyzed by nmr spectroscopy and theoretical calculations

Suitable (3)J(H,H) coupling constants and theoretical calculations were used to define the conformational preferences of trans-2-bromoalkoxycyclohexanes (alkoxy = OMe, OEt, O(i)Pr, and O(t)Bu) for the isolated molecule and as a function of the medium. The diaxial conformer was preponderant, or at least similarly populated to the diequatorial form, for the tert-butoxy derivative only, while the diequatorial conformer was prevalent for the remaining alkoxy derivatives (except for the OMe derivative in CCl(4) solution). The conformational behavior of these compounds was analyzed on the basis of classical steric effects and attractive electron delocalizations, by means of natural bond orbital analysis.     

Comparative properties of Amazonian oils obtained by different extraction methods

Pequi (Caryocar brasiliense Camb.), baba?u (Orbignya phalerata Mart.), buriti (Mauritia flexuosa), and passion fruit (Passiflora edulis) oils were studied to determine their antibacterial, antioxidant and cytotoxic activities, as well as their total phenol and carotenoid contents. The fatty acid contents were determined by GC-MS. The three types of passion fruit oils studied were refined, cold pressed or extracted from seeds in a Soxhlet apparatus. The oils thus obtained showed differences in antioxidant activity and carotenoid content, but were similar in regard to total phenols. Buriti and pequi had the highest carotenoid contents, while refined and cold pressed passion fruit oil displayed the highest antioxidant activity. Pequi oil was the only oil to display antibacterial and cytotoxic activity.     

Poly(D,L-lactide)-block-poly(2-hydroxyethyl acrylate) block copolymers as potential biomaterials for peripheral nerve repair: in vitro and in vivo degradation studies

The properties of poly(D ,L ‐lactide)‐block‐poly(2‐hydroxyethyl acrylate) (PLA‐b‐PHEA) block copolymers by means of in vitro / in vivo (rat) degradation are investigated and compared to those of PLA homopolymer. Over 12 weeks, we observe mass loss and molecular weight decrease. In vitro and in vivo findings are very similar for each polymer tested. When a short PHEA block is used (PLA‐b‐PHEA 15 000–3 000 g · mol^?1, 85/15 wt%), the degradation process is found to be very similar to that of homo‐PLA, and to be typical of a bulk erosion mechanism, with no mass loss observed until week 7 and continuous decrease of molar mass within this timeframe. For a longer PHEA block length within the block copolymer (PLA‐b‐PHEA 15 000–7 500 g · mol^?1, 65/35 wt%), the degradation mechanism is modified, with a significant mass loss observed at early times and only a slight decrease in molar mass. The latter finding is related to the pronounced hydrophilicity and softness of the material induced by the PHEA block, which allow easy diffusion and rapid leakage of the degradation residues from the material towards the aqueous medium. Schwann cells are found to better adhere on spin‐coated films of PLA‐b‐PHEA (85/15 wt%) than on PLA ones. These results show the potential of such hydrophilized PLA‐based copolymers for use in peripheral nerve repair.

     

Investigation of sulphur compounds in coal tar using monodimensional and comprehensive two-dimensional gas chromatography

Coal is a non renewable fossil fuel, used mainly as a source of electrical energy and in the production of coke. It is subjected to thermal treatment, pyrolysis, which produces coke as a main product, in addition to a condensed liquid by-product, called tar. Tar is a complex mixture of organic compounds which contains different chemical classes, presenting aromatic and sulphur heterocyclic compounds. In general, identification of these compounds requires steps of isolation and fractionation, mainly due to co-elution of these compounds with polyaromatic hydrocarbons (PAH). The objective of this work is to characterize the sulphur compounds present in the coal tar obtained via pyrolysis, using comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry detector (GC×GC/TOFMS). Coal samples from the State of Paraná, Brazil were subjected to laboratorial scale pyrolysis. Several experimental conditions were tested, such as sample weight (5, 10 and 15g), heating ramp (10, 25 and 100°C/min) and final temperature (500, 700 and 900°C). Samples were analyzed by one dimensional gas chromatography (1D-GC) coupled to a quadrupole mass spectrometry detector (GC/qMS) and two-dimensional gas chromatography with time-of-flight mass spectrometry detector (GC×GC/TOFMS). The higher amount of sulphur compounds was obtained at a final temperature of 700°C and a heating ramp of 100°C/min. The main classes observed in the color plot were thiophenes, benzothiophenes and alkylated dibenzothiophenes. GC×GC/TOFMS allowed the identification of the greater number of compounds and the separation of several sulphur compounds from one another. Moreover, separation of sulphur compounds from polyaromatic hydrocarbons and phenols was achieved, which was not possible by 1D-GC. Comparing GC×GC/TOFMS and 1D-GC (SIM mode) also showed that 1D-GC, one of the most employed quantification tools for sulphur compounds, can be misleading for detection, identification and quantification, as the number of isomers of sulphur compounds found was greater than theoretically possible.