强流ECR离子源引出系统研究

为了提高强流ECR 离子源的引出束流品质,分别设计了1# 和2# 引出系统,利用束流引出模拟软件PBGUNS 对1# 和2# 引出系统进行了质子束流引出与传输的模拟计算,结合实际测得的发射度数据分析引出系统,发现2# 引出系统比1# 引出系统引出束流品质高。对ECR 离子源引出系统的电势等位线分布等参数引起的球差进行了简单数学推导及MATLAB 绘图,并结合1# 和2# 引出系统束流相图模拟结果证明了球差会使引出束流品质有效发射度增长,通过适当加大电极孔径可改善束流聚焦情况,得到了束流光学聚焦较好的束流引出系统设计。To improve the quality of extracted ion beam from a high current ECR ion source, 1# and 2# extraction systems were designed and tested. The PBGUNS code was used to simulate the 1# and 2# extraction systems of proton ion beam. The emittance measurement results with the two different extraction systems were compared and analyzed with the simulation, the conclusion that more high quality beam extracted from 2# system than 1# system was got. The formula derivation of ECR ion source extraction system spherical aberration and MATLAB drawing was done by the analyzing on the distribution of extraction field equipotentials, effective emittance increasing caused by spherical berration was proved by 1# and 2# extraction systems beam phase space simulation result, beam focusing would be improved if electrode hole size increasing appropriately and a general concept on good optics focusing of ion beam extraction system was proposed finally.     

Morphology Development in Multi‐Component Polymer Blends: I Composition Effect on Phase Morphology in PP/PET Polymer Blends

The relationship of the phase morphology of polypropylene/polyethylene‐terephthalate (PP/PET) blends and their corresponding compatibilized blends with composition was investigated using digital image analysis. A diameter, d _g , was defined and calculated to discuss the phase morphology of this polymer blend system. A figure‐estimation method was introduced to determine the width of the distribution of d _g . Based on the method, it is proven that the distribution of d _g obeys a log‐normal distribution and consequently, the distribution width, σ was calculated. Further, a fractal dimension, D _f , was introduced to describe the distribution of main sizes of the particles of the dispersed phase. The results showed that, while d _g increased with the concentration of the dispersed phase, σ and D _f show different dependence relations on composition;σ increases monotonously but D _f shows a maximum at a PET content of 30%, indicating that, even though the whole size distribution is much broader, the distribution of the main body of size becomes more uniform when the content of PET is less than 30%.     

Trace Elements in Lycium barbarum L. Leaves by Inductively Coupled Plasma Mass Spectrometry after Microwave Assisted Digestion and Multivariate Analysis

The concentrations of 14 elements in Lycium barbarum L. leaves collected from the Qaidam basin (China) were determined by inductively coupled plasma mass spectrometry after microwave assisted digestion. This work presents two goals: (1) to determine 14 elements in L. barbarum leaves; (2) to examine the relationship between elements using correlation analysis, principal component analysis, and cluster analysis. The accuracy and precision were verified against a GBW07605 Tea Leaves certified reference material. The results demonstrated that the method was reliable, reproducible, and suitable for determination of the concentrations of trace elements in L. barbarum leaves. Correlation analysis showed that aluminum–copper, arsenic–zinc, manganese–selenium, and chromium–iron have medium correlation coefficients. Principal component loading for L. barbarum leaves extracted seven components explained about 85% of the total variance. Cluster analysis depicts four clusters: (1) arsenic and titanium; (2) calcium, magnesium, manganese, selenium, and zinc; (3) cobalt, iron, and molybdenum; (4) aluminum, copper, and chromium.     

Preconcentration and Separation of Gold(III) from Ore Samples by Solid-Phase Extraction Prior to Its Catalytic Fluorescent Determination

ABSTRACT

A new catalytic kinetic fluorescent quenching method for the determination of trace gold(III) was investigated. The method was based on the catalytic effect of gold on oxidation of 3-(3′-methylphenyl)-5- (2′-arsenoxylphenylazo) rhodanine by hydrogen peroxide in potassium hydrogen phthalate–hydrochloric acid (pH = 3.4). Under the optimum conditions, the great decrease of fluorescence intensity has a linear relationship against the concentration of gold in the range of 0 to 12.0 µg·L^?1 with a detection limit of 6.0 × 10^?10g·L^?1. The coexistent metal ions can be separated, and gold can be enriched by TBP resin of solid-phase extraction, which greatly improves the selectivity and sensitivity of the system. The method can be used to determine trace amounts of gold in ore samples successfully with satisfactory results.     

High pressure X-ray diffraction study on BaWO4-II

BaWO₄-II has been synthesized at 5 GPa and 610°C. Its high pressure behavior was studied by in situ synchrotron X-ray diffraction measurements at room temperature up to 17 GPa. BaWO₄-II retains its monoclinic structure. Bulk and axial moduli determined by fitting a third-order Birch–Murnaghan equation of state to lattice parameters are: K ₀=86.2±1.9 GPa, K ₀(a)=56.0±0.9 GPa, K ₀(b)=85.3±2.4 GPa, and K ₀(c)=146.1±3.2 GPa with a fixed K′=4. Analysis of axial compressible modulus shows that the a-axis is 2.61 times more compressible than the c-axis and 1.71 times more compressible than the b-axis. The beta angle decreases smoothly between room pressure and 17 GPa from 93.78° to 90.90°.     

Addition of multiwalled carbon nanotube and graphene nanosheet in cobalt oxide film for enhancement of capacitance in electrochemical capacitors

In order to enhance the capacitance of electrochemical capacitors, multiwalled carbon nanotubes (MWCNTs) and graphene nanosheets (GNS) were added to cobalt oxide (Co₃O₄) paste. The composite film based on Co₃O₄/MWCNT/GNS (95:4:1 wt%) exhibited a capacitance of 294 F/g while the capacitance of Co₃O₄/MWCNT (95:5 wt%) and pure Co₃O₄ film is 205 and 163 F/g, respectively. The enhanced capacitance of Co₃O₄/MWCNT/GNS composite film was attributed to the electrochemical contributions of the Co₃O₄ nanoparticle attached to the GNS as well as their significantly increased specific surface areas by MWCNTs. Furthermore, the composite films showed faradaic redox capacitive behavior to double-layer capacitive behavior due to the different nanostructures of the composites.     

The fine structure levels and spin-singlet contributions to zero-field-splitting parameters of Cr2+ ion in CdGa2S4

A theoretical investigation is reported of the fine structure levels and the spin-singlet contributions to zero-field-splitting (ZFS) parameters for Cr²⁺ ion in CdGa₂S₄ crystals. Firstly, the complete energy matrix including all spin states for a 3d ⁴ ion in tetrahedral D _2d symmetry is constructed according the double-group chain in the strong-field scheme. Then, by diagonalizing the complete energy of electron–electron interactions, the crystal field and the spin–orbit coupling for the Cr²⁺ (3d ⁴) ion in CdGa₂S₄ crystal, the fine structure levels and the spin-singlet contributions to ZFS parameters a, D and F are calculated. The results show that the spin-singlet contribution to D is negligible, but the contributions to a and F are very important. So, to obtain more accurate ZFS parameters for 3d ⁴ ions in the tetrahedral crystals, all spin states should be considered.     

Significant decrease in interfacial energy of grain boundary through serrated grain boundary transition

The mechanism of serrated grain boundary formation and its effect on liquation behaviour have been studied in a wrought nickel-based superalloy – Alloy 263. It was newly discovered that grain boundaries are considerably serrated in the absence of γ?′-phase or M₂₃C₆ at the grain boundaries. An electron energy-loss spectroscopy study suggests that serration is triggered by the discontinuous segregation of C and Cr atoms at grain boundaries for the purpose of relieving the excessive elastic strain energy. The grain boundaries serrate to have specific segments approaching one {111} low-index plane at a boundary so that the interfacial free energy of the grain boundary can be decreased, which may be responsible for the driving force of the serration. The serrated grain boundaries effectively suppress grain coarsening and are highly resistant to liquation due to their lower wettability resulting from a lower interfacial energy of the grain boundary.     

New minimax inequality with applications to existence theorems of equilibrium points

A new minimax inequality is proved on a set which is the union of an increasing sequence of compact convex sets in a topological vector space. As applications, several existence theorems of equilibrium points for different games are obtained.The authors would like to thank the referees for their helpful suggestions.