A self-assembled multivalent pseudopolyrotaxane for binding galectin-1

A self-assembled pseudopolyrotaxane consisting of lactoside-displaying cyclodextrin (CD) "beads" threaded onto a linear polyviologen "string" was investigated for its ability to inhibit galectin-1-mediated T-cell agglutination. The CDs of the pseudopolyrotaxane are able to spin around the axis of the polymer chain as well as to move back and forth along its backbone to alter the presentation of its ligand. This supramolecular superstructure incorporates all the advantages of polymeric structures, such as the ability to span large distances, along with a distinctively dynamic presentation of its lactoside ligands to afford a neoglycoconjugate that can adjust to the relative stereochemistries of the lectin's binding sites. The pseudopolyrotaxane exhibited a valency-corrected 10-fold enhancement over native lactose in the agglutination assay, which was greater than the enhancements observed for lactoside-bearing trivalent glycoclusters and a lactoside-bearing chitosan polymer tested using the same assay. The experimental results indicate that supramolecular architectures, such as the pseudopolyrotaxane, provide tools for investigating protein-carbohydrate interactions.     

Charge-transfer hybrids containing covalently bonded polyoxometalates and ferrocenyl units

Two new charge-transfer hybrids with one or two ferrocenyl units covalently attached to a hexamolybdate cluster through an extended pi-conjugated bridge have been prepared using Pd-catalyzed coupling reactions on monoiodo- or diiodo-functionalized cluster substrates in over 60% yields. These hybrids have been characterized by (1)H NMR, FTIR, electrospray ionization mass spectrometry, and X-ray diffraction. The electronic spectra of these hybrids show a broad absorption tail extending beyond 550 nm, indicating the existence of charge-transfer transition from the ferrocenyl donor to the cluster acceptor. The observation of the clear charge-transfer transition indicates the contribution of charge-transfer resonance to the ground state in both 2a and 2b even though the donor-acceptor separation distance of 11.29 A is rather long, signaling a through-bond charge-transfer nature made possible by the organic pi-conjugated bridge. Cyclic voltammetry studies reveal a one-electron oxidation wave and a one-electron reduction wave for the hybrid with one ferrocenyl unit. For the one with two ferrocenyl units, a lower reduction potential and a two-electron oxidation wave are observed, indicating negligible electronic interactions between the two ferrocenyl units.     

Quad quantum cascade laser spectrometer with dual gas cells for the simultaneous analysis of mainstream and sidestream cigarette smoke

A compact, fast response, infrared spectrometer using four pulsed quantum cascade (QC) lasers has been applied to the analysis of gases in mainstream (MS) and sidestream (SS) cigarette smoke. QC lasers have many advantages over the traditional lead-salt tunable diode lasers, including near room temperature operation with thermoelectric cooling and single mode operation with improved long-term stability. The new instrument uses two 36 m, 0.3 l multiple pass absorption gas cells to obtain a time response of 0.1s for the MS smoke system and 0.4s for the SS smoke system. The concentrations of ammonia, ethylene, nitric oxide, and carbon dioxide for three different reference cigarettes were measured simultaneously in MS and SS smoke. A data rate of 20Hz provides sufficient resolution to determine the concentration profiles during each 2s puff in the MS smoke. Concentration profiles before, during and after the puffs also have been observed for these smoke constituents in SS smoke. Also, simultaneous measurements of CO(2) from a non-dispersive infrared (NDIR) analyzer are obtained for both MS and SS smoke. In addition, during this work, nitrous oxide was detected in both the MS and SS smoke for all reference cigarettes studied.     

Squeezing the [Cu-OH...H2O-Cu]3+ bridge by cryptate encapsulation

Treatment of cryptand L(1) with Cu(II) generates a H3O2(-)-bridged dicopper(II) cryptate, 2, where the guest anion has responded to steric constraint by a significant shortening of the O-O distance to 2.325(9) A; computational optimization at the B3LYP/6-31(d) level suggests that the bridging O-H...O H-bond is bent (approximately 157 degrees) but that the barrier to interchange of the bridging H atom is low (<4 kJ mol(-1)). This cryptate, rather than the [Cu2L(1)muCN]3+ species recently claimed to derive from cleavage of the C-C bond of the solvent, is the product of acetonitrile recrystallization of the initially formed reaction product, 1.     

Determination of volatile nitrosamines in meat products by microwave-assisted extraction and dispersive liquid-liquid microextraction coupled to gas chromatography-mass spectrometry

Microwave-assisted extraction (MAE) and dispersive liquid-liquid microextraction (DLLME) coupled with gas chromatography-mass spectrometry (GC-MS) were evaluated for use in the extraction and preconcentration of volatile nitrosamines in meat products. Parameters affecting MAE, such as the extraction solvent used, and DLLME, including the nature and volume of the extracting and disperser solvents, extraction time, salt addition and centrifugation time, were optimized. In the MAE method, 0.25g of sample mass was extracted in 10mL NaOH (0.05M) in a closed-vessel system. For DLLME, 1.5mL of methanol (disperser solvent) containing 20μL of carbon tetrachloride (extraction solvent) was rapidly injected by syringe into 5mL of the sample extract solution (previously adjusted to pH 6), thereby forming a cloudy solution. Phase separation was performed by centrifugation, and a volume of 3μL of the sedimented phase was analyzed by GC-MS. The enrichment factors provided by DLLME varied from 220 to 342 for N-nitrosodiethylamine and N-nitrosopiperidine, respectively. The matrix effect was evaluated for different samples, and it was concluded that sample quantification can be carried out by aqueous calibration. Under the optimized conditions, detection limits ranged from 0.003 to 0.014ngmL(-1) for NPIP and NMEA, respectively (0.12-0.56ngg(-1) in the meat products).     

Quantitative determination of the peptide retention of polymeric substrates using matrix-assisted laser desorption/ionization mass spectrometry

Polymer surface-peptide binding interactions have been shown previously to lead to reductions in peptide matrix assisted laser desorption/ionization (MALDI) ion signals. In previous studies, increases in surface-peptide binding were characterized by the increases in both the initially adsorbed and retained quantities of 125I-radiolabeled peptides. The present studies establish a specific correlation between the peptide retention properties of the polymer surface and the reduction in the peptide MALDI ion signal. This correlation is demonstrated by obtaining MALDI mass spectra of angiotensin I applied to various polymer surfaces having a range of peptide adsorption and retention properties. In addition, the use of a MALDI based method of standard additions is shown to allow the quantitation of the polymer surface-peptide retention affinity for angiotensin I and porcine insulin. The MALDI standard additions method for measurement of surface-peptide retention affinities offers a number of significant advantages over conventional radiolabeled peptide binding methods and promises to be a valuable tool for the determination of this important biomaterial characteristic.     

Determination of tea catechins

An overview of analytical methods for the measurement of biologically important tea catechins is presented. Liquid chromatography and capillary electrophoresis are the most cited techniques for catechin separation, identification and quantitation. Liquid chromatography with ultraviolet detection is frequently used; however, mass spectrometry, electrochemical, fluorescence and chemiluminescence detection are also utilized in cases where more sensitive or selective detection is needed. Two modes of capillary electrophoresis, capillary zone electrophoresis and micellar electrokinetic capillary chromatography, have been employed for the determination of catechins. Both modes of capillary electrophoresis are based on ultraviolet detection. Additional analytical techniques, such as gas chromatography, thin-layer chromatography, paper chromatography, spectrophotometry, biosensing, chemiluminescence and nuclear magnetic resonance spectroscopy have also been utilized for the determination of catechins and are reviewed herein.     

Effect of PBT molecular weight and reactive compatibilization on the dispersed‐phase coalescence of PBT/SAN blends

Poly(butylene terephthalate) (PBT)/styrene‐acrylonitrile copolymer (SAN) blends were investigated with respect to their phase morphology. The SAN component was kept as dispersed phase and PBT as matrix phase and the PBT/SAN viscosity ratio was changed by using different PBT molecular weights. PBT/SAN blends were also compatibilized by adding methyl methacrylate‐co‐glycidyl methacrylate‐co‐ethyl acrylate terpolymer, MGE, which is an in situ reactive compatibilizer for melt blending. In noncompatibilized blends, the dispersed phase particle size increased with SAN concentration due to coalescence effects. Static coalescence experiments showed evidence of greater coalescence in blends with higher viscosity ratios. For noncompatibilized PBT/SAN/MGE blends with high molecular weight PBT as matrix phase, the average particle size of SAN phase does not depend on the SAN concentration in the blends. However noncompatibilized blends with low molecular weight PBT showed a significant increase in SAN particle size with the SAN concentration. The effect of MGE epoxy content and MGE molecular weight on the morphology of the PBT/SAN blend was also investigated. As the MGE epoxy content increased, the average particle size of SAN initially decreased with both high and low molecular weight PBT phase, thereafter leveling off with a critical content of epoxy groups in the blend. This critical content was higher in the blends containing low molecular weight PBT than in those with high molecular weight PBT. At a fixed MGE epoxy content, a decrease in MGE molecular weight yielded PBT/SAN blends with dispersed nanoparticles with an average size of about 40 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Preparation and characterization of standard reference material 1849 infant/adult nutritional formula

Standard Reference Material (SRM) 1849 Infant/Adult Nutritional Formula has been issued by the National Institute of Standards and Technology (NIST) as a replacement for SRM 1846 Infant Formula, issued in 1996. Extraction characteristics of SRM 1846 have changed over time, as have NIST's analytical capabilities. While certified mass fraction values were provided for five constituents in SRM 1846 (four vitamins plus iodine), certified mass fraction values for 43 constituents are provided in SRM 1849 (fatty acids, elements, and vitamins) and reference mass fraction values are provided for an additional 43 constituents including amino acids and nucleotides, making it the most extensively characterized food-matrix SRM available from NIST.