Detection of environmental chemicals by SPR assay using branched cyclodextrin as sensor ligand

We obtained the association constants Ka of estrogen (E2) and environmental chemicals by the surface plasmon resonance (SPR) assay using the immobilized mono-6-O-α-maltosyl-β-CD (G₂βCD) compared with the immobilized β-CD and the immobilized estrogen receptor (ER). The association behavior of G₂βCD was shown as a ER model compound. The calibration curve was determined by the initial rate of association depending on the various concentrations, and the minimum detectable concentrations in the order of parts per billion were calculated. The SPR assay has advantages that the pre-treatment of the sample is not necessary and the immobilized ligand is stable and useful for the repeated measurement.     

化学键合吸附剂的合成及吸附行为

在无定型硅胶上化学键合十八烷基三氯硅烷，键合率17%-20％，粒度5μm-10μm，以此键合的吸附剂可有效地吸附香烟烟气中的焦油、亚硝胺，吸附率分别为15%-18％和37%-43％，研究了化学键合吸附剂的粒度和加入量对吸附性能的影响。     

Sesquiterpene esters from the fruits of Celastrus orbiculatus

Three new beta-dihydroagarofuran sesquiterpene esters, 6 alpha-acetoxy-9 beta-benzoyloxy-1 beta-cinnamoyloxy-8 beta-butanoyloxy-beta-dihydroagarofuran (1), 6 alpha-acetoxy-9 beta-benzoyloxy-1 beta-cinnamoyloxy-8 beta-(2-methylbutanoyloxy)-beta-dihydroagarofuran (2), and 6 alpha-acetoxy-1 beta,8 beta-dibenzoyloxy-9 beta-hydroxy-beta-dihydroagarofuran (6), together with three known compounds (3-5) were isolated from the fruits of Celastrus orbiculatus THUNB. Their structures were elucidated on the basis of spectroscopic methods. Compound 4 showed moderate activity in inhibiting LPS-induced nitric oxide production in murine macrophage RAW264.7 cells with an IC(50) value of 43.7 microM.     

Polymer-Titanium hybrids obtained by radical polymerization and Sol-Gel process

The possibility to prepare hybrids made by poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA) and/or poly(ethyl acrylate) (PEtA) with TiO₂ was studied. The processes of polymer formation-radical polymerization and sol-gel process for inorganic network —were achieved simultaneously. Due to a high reactivity of titanium isopropoxide (TIP) in the sol-gel process, a complexant comonomer, allyl acetoacetate (AlAcAc), was used. Covalent bonds between polymer and inorganic chains were obtained by addition of trialkoxysilane derivates with vinyl (VTES) or methacryloyl (MPTS) groups. The presence of TIP inhibits the radical polymerization of vinyl acetate (VAc). The PVAc-TiO₂ hybrids were produced by the sol-gel process of TIP in the presence of pre-obtained PVAc. Except for VTES and MPTS, trialkoxysilane derivates with methyl (MeTES), octyl (OTES) and phenyl (PTES) groups were used. The thermal stability of hybrids is strongly affected by TiO₂ presence and by the type of trialkoxysilane derivates. The thermal stability of PVAc hybrids decreases in the presence of TiO₂ inorganic network. The glass transition temperature of polymers increases in the presence of the inorganic network.     

核-壳型聚丙烯酸酯复合乳液

简述了核-壳型聚丙烯酸酯复合乳液的合成方法、形态及其影响因素与判断方法、结构与性能等方面的研究进展;认为核-壳型复合乳液膜机械性能优良的原因是:核、壳两相间存在的过渡区适当地抑制了二者的相分离。     

Selective Acetylation of Alcohols and Amines with Ethyl Acetate in the Presence of H<Subscript>6</Subscript>[PMo<Subscript>9</Subscript>V<Subscript>3</Subscript>O<Subscript>40</Subscript>] as the Catalyst

Summary. Acetylation of various alcohols and benzyl amine was tested in the presence of H₆[PMo₉V₃O₄₀], a mixed addenda heteropolyacid, in ethyl acetate under reflux condition. Phenols and anilines are not affected under the reaction conditions. Selective transestrification of alcohols can be achieved in the presence of phenol and aniline derivatives using this method.     

The Preparation and Characterization of Highly Dispersed PdO over Alumina for Low‐temperature Combustion of Methane

PdO/Al₂O₃ catalysts prepared by glow discharge plasma treatment followed by thermal calcination show a much higher dispersion and a better catalytic activity for methane combustion at relatively low temperatures. The dispersion of palladium active species by such plasma prepared catalysts is 29.7%, 5.4 times higher than that of conventional catalysts. XPS analysis indicates that a surface enrichment of Pd active species (PdO) has been achieved after plasma treatment. The surface atomic composition of PdO of plasma prepared catalysts reaches 10.5%. XRD characterization also confirms a wellcrystallized PdO phase present on the plasma prepared catalyst. The lightoff temperature of the plasma prepared catalyst is 370°C, 50°C lower than that obtained from the conventional catalyst.     

Determination of imazalil by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

A simple, rapid and reproducible capillary isotachophoretic on-line coupled with capillary zone electrophoresis (CITP-CZE) method for the determination of IMz in food packaging extracts and its residues in apples is described. A good separation of the IMZ from other sample constituents was achieved within 15 minutes without any sample clean up. Method characteristics (linearity, accuracy, intra-assay and detection limit) were determined. Less amount of time involved, sufficient sensitivity and low running cost are the important attributes of CITP-CZE method.     

Kinetic Determination of Microquantities of Rutin by Perturbation of the Bray-Liebhafsky Oscillatory Reaction in an Open System

A kinetic method is described for the microquantitative (microconcentration/microvolume) determination of rutin based on potentiometric monitoring of the concentration perturbations of the Bray-Liebhafsky (BL) oscillatory reaction being in a non-equilibrium stationary state close to a bifurcation point. The experiments are carried out in an open reactor. The response of the matrix system to perturbations by different concentrations of rutin ethanolic solutions is followed by a Pt-electrode. In the concentration range between 7.8×10^–8moldm^–3 and 9.1×10^–6mol dm^–3, we found a linear dependence of the maximal potential shift, E_m, on the logarithm of the rutin concentrations. The unknown concentrations can be determined from the calibration curve up to an accuracy of ±5%. The detection limit is 3.6×10^–8mol dm^–3. The amount of required sample can be as small as 10µL.