幂率流体圆管非定常流动的数值分析

本文讨论水平圆管中幂率流体的起动问题。用显式和隐式两种格式,我们得到了问题的数值解并从而得到流动建立时间的近似公式。     

不同的分子间势对LJD状态方程的影响

本文分別采用6-exp,M-M和LJ(6,12)三种形式的分子间作用势,计算了LJD理论的压缩性因子,以检验由于势的不同对LJD状态方程造成的影响。     

双参考光全息—散斑干涉术的原理和实验

本文用统计光学方法对双参考光全息——散斑干涉术进行了详尽的理论分析,给出了全息和散斑干涉场区域平均光强分布与光学系统主要参数及三维变形场各分量之间关系的解析表达式,进而讨论了离面位移和面内位移测量的上、下限,最后还给出了有关的实验结果。     

Determining the stress intensity factor by using the principle of minimum potential energy

Expressing the total potential energy of the system of a cracked body П by Williams’ infinite series solution of stress and displacement components containing coefficients A_n(n = 1,2,...), we obtain a set of simultaneous linear equations of unknown coefficients A_n by using the principle of minimum potential energy. When the set of equations is solved, the stress intensity factor K₁ can be easily determined. It is equal to √2πaA₁ Take a sample plate as an example. A single-edgc-cracked plate under tension, with the ratio of crack length to the width of the plate being 0.5 and the ratio of half plate height to the width of the plate being 2.0 and 2. 5, has been calculated. Only 20 - 30 coefficients are taken, and the errors in stress intensity factors are within 5%.     

The optical properties of the laser beam passed through a turbulent shear layer

The related fluid dynamic theory, experimental device and some preliminary results of the study of the optical properties of a laser beam passed through a turbulent shear layer are presented. The method of image processing for the determination of the optical density from a interferogram by means of a Microneye Bullet and a Microcomputer is also described.     

ENERGY PRINCIPLE OF THREE DIMENSIONAL J INTEGRAL

Various exprressions of three-dimensional J integral are proposed. We derive here three-dimensional J integral by means of general potential energy principle and Green's theomem. Its physical meaning and application are shown in the paper, the results are true both for infinitesimal and finite deformation.     

Ge-Sb-Se硫系薄膜制备及光学特性研究

介绍了几种常见的硫系薄膜制备方法, 根据现有实验条件采用热蒸发法和磁控溅射法制备出Ge-Sb-Se三元体系硫系薄膜, 通过台阶仪测试薄膜的厚度和表面粗糙度, 计算出两种制备方法的成膜速率, 并通过X射线光电子能谱测试了两种制备方法所得薄膜与块体靶材组分的差别. 利用Z扫描技术和分光光度计测试了热蒸发法制备所得薄膜的三阶非线性性能和透过光谱, 计算出非线性折射率、非线性吸收系数和薄膜厚度等参数. 结果表明热蒸发法制备Ge-Sb-Se薄膜具有良好的物理结构和光学特性, 在集成光学器件方面很高的应用潜力.     

用A238U超核聚变检验裂变机制的可行性探讨

超核_A²³⁸U的裂变的剪断过程,用不断上升的势垒模拟,对不同的剪断过程(恒速或加速),对A末态激发几率(布居于轻裂块的几率)作了计算,分别为27%或31%。有待实验检验。     

Effect of microstructure on thermoelectric properties of CSD-grown Bi2Sr2Co2Oy thin films

Three Bi₂Sr₂Co₂O_y thin films with different microstructures have been prepared by chemical solution deposition on LaAlO₃(001) through varying the annealing temperature. With the decrease in the annealing temperature, both the size and c-axis alignment degree of grains in the film decrease as well, leading to an increase in the film resistivity. In addition, the decrease in the annealing temperature also results in a slight increase in the seebeck coefficient due to the enhanced energy filtering effect of small-grain film. The nanostructured Bi₂Sr₂Co₂O_y film with the average grain size of about 100 nm shows a power factor comparable to that of the films with larger grains. Since the thermal conductivity of the nanostrcutured films can be depressed due to the enhanced phonon scattering by grain boundary, a higher figure of merit is expected in Bi₂Sr₂Co₂O_y thin film with grains in nanometer size.