聚氨基黑10B修饰电极检测维生素B6

采用电化学聚合的方法将氨基黑10B染料分子修饰到玻碳电极表面,制备了聚氨基黑10B修饰电极,其稳定性和重复性较好。 该修饰电极对维生素B6（VB6）的氧化有明显的电催化作用,VB6的氧化峰电位负移,电流显著增加。 利用微分脉冲伏安和安培检测技术对VB6进行了定量检测,检测限均可达到0.05 μmol/L,与已报道的修饰电极比较,是目前最低的。 将该修饰电极用于不同药物制剂中VB6浓度的测定,操作方便、快速,方法灵敏,准确度高。     

A nonemissive iridium(III) complex that specifically lights-up the nuclei of living cells

A nonemissive cyclometalated iridium(III) solvent complex, without conjugation with a cell-penetrating molecular transporter, [Ir(ppy)(2)(DMSO)(2)](+)PF(6)(-) (LIr1), has been developed as a first reaction-based fluorescence-turn-on agent for the nuclei of living cells. LIr1 can rapidly and selectively light-up the nuclei of living cells over fixed cells, giving rise to a significant luminescence enhancement (200-fold), and shows very low cytotoxicity at the imaging concentration (incubation time <10 min, LIr1 concentration 10 μM). More importantly, in contrast to the reported nuclear stains that are based on luminescence enhancement through interaction with nucleic acids, complex LIr1 as a nuclear stain has a reaction-based mode of action, which relies on its rapid reaction with histidine/histidine-containing proteins. Cellular uptake of LIr1 has been investigated in detail under different conditions, such as at various temperatures, with hypertonic treatment, and in the presence of metabolic and endocytic inhibitors. The results have indicated that LIr1 permeates the outer and nuclear membranes of living cells through an energy-dependent entry pathway within a few minutes. As determined by an inductively coupled plasma atomic emission spectroscopy (ICP-AEC), LIr1 is accumulated in the nuclei of living cells and converted into an intensely emissive adduct. Such novel reaction-based nuclear staining for visualizing exclusively the nuclei of living cells with a significant luminescence enhancement may extend the arsenal of currently available fluorescent stains for specific staining of cellular compartments.     

Spatial bandgap engineering along single alloy nanowires

Bandgap engineering of semiconductor nanowires is important in designing nanoscale multifunctional optoelectronic devices. Here, we report a facile thermal evaporation method, and realize the spatial bandgap engineering in single CdS(1-x)Se(x) alloy nanowires. Along the length of these achieved nanowires, the composition can be continuously tuned from x = 0 (CdS) at one end to x = 1 (CdSe) at the other end, resulting in the corresponding bandgap (light emission wavelength) being modulated gradually from 2.44 eV (507 nm, green light) to 1.74 eV (710 nm, red light). In spite of the existing composition (crystal lattice) transition along the length, these multicolor nanowires still possess high-quality crystallization. These bandgap engineered nanowires will have promising applications in such as multicolor display and lighting, high-efficiency solar cells, ultrabroadly spectral detectors, and biotechnology.     

Communication: vacuum ultraviolet laser photodissociation studies of small molecules by the vacuum ultraviolet laser photoionization time-sliced velocity-mapped ion imaging method

We demonstrate that the vacuum ultraviolet (VUV) photodissociation dynamics of N(2) and CO(2) can be studied using VUV photoionization with time-sliced velocity-mapped ion imaging (VUV-PI-VMI) detection. The VUV laser light is produced by resonant sum frequency mixing in Kr. N(2) is used to show that when the photon energy of the VUV laser is above the ionization energy of an allowed transition of one of the product atoms it can be detected and characterized as the wavelength is varied. In this case a β parameter = 0.57 for the N((2)D°) was measured after exciting N(2)(o(1)Π(u), v(') = 2, J(') = 2) ← N(2)(X(1)Σ(g) (+), v(") = 0, J(") = 1). Studies with CO(2) show that when there is no allowed transition, an autoionization resonance can be used for the detection of a product atom. In this case it is shown for the first time that the O((1)D) atom is produced with CO((1)Σ(+)) at 92.21 nm. These results indicate that the VUV laser photodissociation combined with the VUV-PI-VMI detection is a viable method for studying the one-photon photodissociation from the ground state of simple molecules in the extreme ultraviolet and VUV spectral regions.     

Gas purge microsyringe extraction for quantitative direct gas chromatographic-mass spectrometric analysis of volatile and semivolatile chemicals

Sample pretreatment before chromatographic analysis is the most time consuming and error prone part of analytical procedures, yet it is a key factor in the final success of the analysis. A quantitative and fast liquid phase microextraction technique termed as gas purge microsyringe extraction (GP-MSE) has been developed for simultaneous direct gas chromatography-mass spectrometry (GC-MS) analysis of volatile and semivolatile chemicals without cleanup process. Use of a gas flowing system, temperature control and a conventional microsyringe greatly increased the surface area of the liquid phase micro solvent, and led to quantitative recoveries of both volatile and semivolatile chemicals within short extraction time of only 2 min. Recoveries of polycyclic aromatic hydrocarbons (PAHs), organochlorine pesticides (OCPs) and alkylphenols (APs) determined were 85-107%, and reproducibility was between 2.8% and 8.5%. In particular, the technique shows high sensitivity for semivolatile chemicals which is difficult to achieve in other sample pretreatment techniques such as headspace-liquid phase microextraction. The variables affecting extraction efficiency such as gas flow rate, extraction time, extracting solvent type, temperature of sample and extracting solvent were investigated. Finally, the technique was evaluated to determine PAHs, APs and OCPs from plant and soil samples. The experimental results demonstrated that the technique is economic, sensitive to both volatile and semivolatile chemicals, is fast, simple to operate, and allows quantitative extraction. On-site monitoring of volatile and semivolatile chemicals is now possible using this technique due to the simplification and speed of sample treatment.     

人神经母细胞瘤的磷酸化膜蛋白质组分析

针对人神经母细胞瘤SH-SY5Y细胞系的磷酸化膜蛋白质组,发展了基于多酶酶解法结合杂化硅胶基质固定化钛离子亲和色谱(Ti4+-IMAC)整体柱富集的分析策略。该方法通过对细胞裂解液进行超速离心,以及1 mol/L NaCl和0.1 mol/L Na2CO3顺序清洗,获得膜蛋白质组分。所提取的蛋白质分别经胰蛋白酶、胰凝乳蛋白酶和胃蛋白酶平行酶解,产生的肽段经Ti4+-IMAC整体柱选择性富集磷酸肽后,采用纳升级反相液相色谱分离和质谱鉴定,成功鉴定到43个磷酸化蛋白质,其中有14个定位于膜上。研究结果表明,采用该策略开展SH-SY5Y细胞系磷酸化膜蛋白质组学分析有望加速对该肿瘤的研究和相关潜在标记物的筛选。     

Ti0.10Zr0.15V0.35Cr0.10Ni0.30+5wt% LaNi5复合储氢合金的电化学性能与协同效应

为了改善钛钒基固溶体合金的电化学性能,利用两步电弧熔炼法制备复合储氢合金Ti0.10Zr0.15V0.35Cr0.10Ni0.30+5wt%LaNi5,X-射线衍射(XRD)和场发射扫描电镜-能谱(FESEM-EDS)显示:复合储氢合金的主相是体心立方结构的钒基固溶体相和六方结构的C14 Laves相,复合过程中生成了第二相。电化学测试结果表明:复合合金电极的P-C-T特征、活化性能、最大放电容量、循环稳定性、低温放电性能和动力学特性均较母体合金有显著改善。复合合金电极的活化周期数为5,最大放电容量为353.9 mAh.g-1,233 K时低温放电能力为50.26%。该复合合金电极的最大储氢容量、平台压、电荷转移电阻和交换电流密度均存在协同效应;在任意循环、在高/低温下以及在高倍率放电过程中,该复合合金电极的放电容量均存在协同效应。     

Microwave-assisted synthesis of α-hydroxy aromatic ketones from α-bromo aromatic ketones in water

A reaction ofα-bromo aromatic ketones in water with microwave irradiation gave the correspondingα-hydroxy aromatic ketones in good yields.The use of microwaves was found to significantly improve yields and shorten the reaction time.This reaction afforded a very clean,convenient method for the synthesis ofα-hydroxy aromatic ketones.     

High performance liquid chromatography with immobilized Ru(bpy)_3~(2+)-KMnO_4 chemiluminescence detection and its application in metabolism of repaglinide in pig liver microsomes

A novel high performance liquid chromatography-chemiluminescence（HPLC-CL） method for investigation of in vitro metabolism of repaglinide in pig liver microsomes with microdialysis sampling technique was developed.The chromatographic separation was performed on a Hypersil BDS-C18 column with an isocratic mobile phase consisting of methanol and 0.01 mol/L KH₂PO₄（pH 3.0）（volume ratio 75:25） at a flow rate of 1.0 mL/min.The detection was based on the chemiluminescence reaction of repaglinide with acidic potassium permanganate（KMnO₄） and tris（2,2’-bipyridyl）ruthenium（Ⅲ）(Ru（bpy）₃³⁺),which was immobilized on the cationic ion-exchange resin for obtaining high sensitivity and reducing consumption of expensive reagent.     

A theoretical investigation on the structures and stabilities of C<Subscript>60</Subscript>X<Subscript>18</Subscript> and C<Subscript>70</Subscript>X<Subscript>10</Subscript> (X = H,F, Cl,and Br)

A density functional theory study was performed on fullerene derivatives C₆₀X₁₈ and C₇₀X₁₀ (X = H, F, Cl, and Br). The calculated results show that the lowest energy isomers are IPR-satisfying for C₆₀X₁₈ (X = H, F, Cl, and Br). It is found that the addition patterns of X (X = Cl and Br) are different from those of X (X = H and F) for C₆₀, demonstrating that the stability of fullerene derivatives is partly attributed to the steric repulsion and electronegativity of added atoms. However, the lowest energy isomers are IPR-violating for C₇₀X₁₀ (X = H, F, and Cl), suggesting that many more fullerene derivatives may violate the isolated pentagon rule.