快速凝固Cu-Pb过偏晶合金的性能表征

研究了Cu-Pb过偏晶合金的急冷快速凝固组织特征,定量表征了快速凝固Cu-Pb过偏晶合金的电阻率和力学性能,理论分析了冷却速率和组织形态对合金性能的影响规律. 研究结果表明,在急冷快速凝固条件下,Cu-Pb过偏晶合金中的(Cu)相和(Pb)相均以枝晶方式生长,晶体形态以均匀细小的等轴晶为特征. 随着冷却速率增大,一方面,凝固组织显著细化,晶界增多,对自由电子的散射作用增强,合金电阻率显著增大;另一方面,细晶强化作用增强,合金的抗拉强度呈线性升高,同时,伴随着晶体缺陷数量的增多,合金的伸长率降低. 关键词： Cu-Pb过偏晶合金 快速凝固 电阻率 力学性能     

Ferromagnetism in noncompensated (Mn,Ga)-codoped ZnO films

Mn/Ga noncompensated codoped ZnO films were prepared on c-cut sapphire substrates via pulsed laser deposition. The structural, magnetic, transport, and optical properties of the films were then investigated. Addition of the Ga donor increases the electron concentration and enhances the magnetization in these films because of the net negative charge of the special noncompensated codoping, which can adjust the carrier concentration as well as the magnetic moment. Moreover, the Fermi level moves into the conduction band because of the increase in electron concentration, which results in an increase in the optical band gap value, from 3.28 eV for the undoped ZnO film to 3.61 eV for the (Mn,Ga)-codoped ZnO film.     

Preservation of entanglement in a two-qubit-spin coupled system

A theoretical scheme for preserving the entanglement in a two-qubit-spin coupled system in the presence of Dzyaloshinskii–Moriya (DM) anisotropic antisymmetric interaction is proposed. On the basis of a sequence of operations performed periodically on the system, the scheme can preserve the entanglement of the system starting from any initial state with any desired high precision for any desired long duration.     

结构与参量不确定的网络与网络之间的混沌同步

进行了结构与参量不确定的网络与网络之间的混沌同步研究．通过设计适当的控制输入,不但实现了两个复杂网络之间的混沌同步,而且网络节点状态方程中的未知参量和网络内部节点之间的耦合强度也被同时确定．通过采用具有调制损耗的CO2激光器的状态方程进行仿真实验,发现网络与网络之间的同步性能非常稳定．     

土壤源热泵系统冷凝热回收的优化研究

文中提出了一种土壤源热泵冷凝热回收系统,能够减少冬夏两季土壤源热泵系统从土壤冷热源排放吸收热量不均对土壤温度场所造成的影响,并结合火用平衡方程建立了土壤源热泵系统冷凝热回收的优化模型。基于此模型,探讨了系统冷凝器和地下埋管的优化配置,通过模拟计算对该系统在制冷工况下改进前后的运行情况进行了分析对比,结果显示土壤源冷凝热回收系统应用于实际工程能够提高整个系统的COP以及火用效率。     

An improved loopless mounting method for cryocrystallography

Based on a recent loopless mounting method, a simplified loopless and bufferless crystal mounting method is developed for macromolecular crystallography. This simplified crystal mounting system is composed of the following components: a home-made glass capillary, a brass seat for holding the glass capillary, a flow regulator, and a vacuum pump for evacuation. Compared with the currently prevalent loop mounting method, this simplified method has almost the same mounting procedure and thus is compatible with the current automated crystal mounting system. The advantages of this method include higher signal-to-noise ratio, more accurate measurement, more rapid flash cooling, less x-ray absorption and thus less radiation damage to the crystal. This method can be extended to the flash-freeing of a crystal without or with soaking it in a lower concentration of cryoprotectant, thus it may be the best option for data collection in the absence of suitable cryoprotectant. Therefore, it is suggested that this mounting method should be further improved and extensively applied to cryocrystallographic experiments.     

Operators’s-parameterized ordering and its classical correspondence in quantum optics theory

In reference to the Weyl ordering xmpn→(1/2)mΣι=0m(ιm)Xm-ιPnXι , where X and P are coordinate and momentum operator, respectively, this paper examines operators’s-parameterized ordering and its classical correspondence, finds the fundamental function-operator correspondence ((1-s)/2)(n+m)/2Hm,n((2/(1-s))～(1/2)α,(2/(1-s))～(1/2)α)→a+man,and its complementary relation αnα*m→(-i)n+m((1-s)/2)(m+n)/2:Hm,n(i(2/(1-s))～(1/2)a+,i((2/(1-s))～(1/2)a):,where H m,n is the two-variable Hermite polynomial, a, a+ are bosonic annihilation and creation operators respectively, s is a complex parameter. The s’-ordered operator power-series expansion of s-ordered operator sa+mans in terms of the two-variable Hermite polynomial is also derived. Application of operators’s-ordering formula in studying displaced-squeezed chaotic field is discussed.     

Ultrafast nonlinear optical properties of dye-doped PMMA discs irradiated by 40 fs laser pulses

The two-photon absorption (TPA) characteristics of PMMA discs doped with three different dyes were studied using an fs-pulsed Ti-Sapphire laser as the pump source, and employing the open-aperture Z-scan technique. TPA cross-sections obtained for PMMA doped with the dyes PM597, DCM and rhodamine 6G–rhodamine B (co-doped) were found to be equal to 24.7, 33.3 and 32.3 GM, respectively (1 GM=10^?50 cm⁴ s phot^?1 mol^?1). Furthermore, two-photon fluorescence was measured for the samples containing DCM and rhodamine 6G–rhodamine B (co-doped). Compared to the one-photon fluorescence spectrum, the peaks in the two-photon fluorescence spectrum were red shifted and the extent of red shift increased with increasing doping concentration. We have also observed that the red shift in the two-photon fluorescence peak of the samples in the solid form is much larger than that in the solution state. This phenomenon could be explained by a twisted intra-molecular charge transfer model.     

Preparations for the study on the cluster structure of 16C

In order to look for a proposed cluster structure of 16C, simulation work was made. The simulation of the reaction dynamics give the resolution of the excitation energy on 16C which was reconstructed prior to breakup. The excitation energy resolution is typically ～200 keV at 2 MeV above the two body decay threshold for 16C→12Be+4He. Moreover,some performances of detectors tested using 241 Am α source are also reported.     

Preparation and characterization of Fe3O4 magnetic composite microspheres covered by a P(MAH-co-MAA) copolymer

A magnetic core–shell-layered polymer microsphere (MPS) was successfully synthesized by a dispersion polymerization route, where the modified Fe₃O₄ nanoparticles (MFN) were used as a core, while poly(maleic anhydride-co-methacrylic acid) P(MAH-co-MAA) as a shell was covered on the surface of the Fe₃O₄ nanoparticles. Environmental scanning electron microscope (ESME) and transmission electron microscope (TEM) measurements indicate that the magnetic P(MAH-co-MAA)/Fe₃O₄ composite microspheres assume sphericity and have a novel core–shell-layered structure. The crystal particle sizes of the unimproved Fe₃O₄ and the MFN samples vary from 8 to 16 nm in diameter, and the average size is about 10.6 nm in diameter. The core–shell magnetic composite microspheres can be adjusted by changing the stirring speed. Since multiple Fe₃O₄ cores were coated with a proper percentage of P(MAH-co-MAA) copolymers, and therefore lower density was acquired for the MPS, which improved sedimentation and dispersion behavior. The saturated magnetization of pure Fe₃O₄ nanoparticles reaches 48.1 emu g⁻¹ and the value for composite nanoparticles was as high as 173.5 emu g⁻¹. The nanoparticles show strong superparamagnetic characteristics and can be expected to be used as a candidate for magnetism-controlled drug release.