二元混合制冷剂CO2/R600的气液相平衡研究

采用PR状态方程及其混合法则对不同配比的二元混合制冷剂CO2/R600的气液相平衡进行了计算,将计算结果与相关文献数据进行了比对。结果表明,该文的计算结果与文献数据吻合较好,推算方法可用于CO2/R600混合制冷剂的基本热物性预测。     

超长定向含铁多壁碳纳米管阵列的制备

采用无模板化学气相沉积法,以二茂铁为催化剂,二甲苯为碳源,利用单温炉加热装置制备了定向碳纳米管阵列。运用扫描电子显微镜、透射电子显微镜、拉曼光谱和X射线衍射仪等对定向碳纳米管阵列的形貌、成分和物相进行细致的分析和表征。结果表明:制得的碳纳米管阵列具有良好的定向性和多壁管状结构,并且石墨化程度高;碳纳米管中除碳元素外,管中包含有少量以纳米颗粒和纳米线形式存在的铁及其化合物,主要成分是铁和碳化铁。结合碳纳米管的制备和透射电子显微镜分析表征结果,认为超长碳纳米管阵列的生长模式为底部生长方式,即经历催化剂分解、催化、成核、长大、中毒、凝聚成粒和连接成线的循环过程,正是由于碳源和催化剂的连续供应促成了碳纳米管阵列的快速定向生长。     

北京同步辐射装置3W1B软X射线光束线偏振特性测量

应用自行研制的Mo/Si周期多层膜作为起偏器和检偏器的光学元件, 测量了北京同步辐射装置3W1B束线的偏振状态. 通过数据分析, 得到了3W1B软X射线的有关偏振参数, 在86—89eV能区经过起偏器后的偏振度超过98%, 圆偏振分量介于1%—3%之间.     

New approach to Q-P （P-Q） ordering of quantum mechanical operators and its applications

In this paper, we introduce a new way to obtain the Q-P （P-Q） ordering of quantum mechanical operators, i.e., from the classical correspondence of Q-P （P-Q） ordered operators by replacing q and p with coordinate and momentum operators, respectively. Some operator identities are derived concisely. As for its applications, the single （two-） mode squeezed operators and Fresnel operator are examined. It is shown that the classical correspondence of Fresnel operator’s Q-P （P-Q） ordering is just the integration kernel of Fresnel transformation. In addition, a new photo-counting formula is constructed by the Q-P ordering of operators.     

Molecular dynamics study of thermal stress and heat propagation in tungsten under thermal shock

Using molecular dynamics （MD） simulation, we study the thermal shock behavior of tungsten （W）, which has been used for the plasma facing material （PFM） of tokamaks. The thermo-elastic stress wave, corresponding to the collective displacement of atoms, is analyzed with the Lagrangian atomic stress method, of which the reliability is also analyzed. The stress wave velocity corresponds to the speed of sound in the material, which is not dependent on the thermal shock energy. The peak pressure of a normal stress wave increases with the increase of thermal shock energy. We analyze the temperature evolution of the thermal shock region according to the Fourier transformation. It can be seen that the “obvious” velocity of heat propagation is less than the velocity of the stress wave; further, that the thermo-elastic stress wave may contribute little to the transport of kinetic energy. The heat propagation can be described properly by the heat conduction equation. These results may be useful for understanding the process of the thermal shock of tungsten.     

Quadratic nonlinear response to 1.56-μm continuous wave laser in semi-insulating GaAs

The nonlinear photoresponse to a 1.56μm infrared continuous wave laser in semi-insulating （SI） galliu- marsenide （GaAs） is examined. The double-frequency absorption （DFA） is responsible for the nonlinear photoresponse based on the quadratic dependence of the photocurrent separately on the coupled optical power and bias voltage. The electric field-induced DFA remarkably affects the native DFA in SI GaAs. The surface electric field or the surface band-bending of SI GaAs significantly affects the magnitude variation of the Dhotocurrent and dark current     

Photocatalytic degradation efficacy of Bi4Ti3O12 micro-scale platelets over methylene blue under visible light

〈001〉 textured Bi₄Ti₃O₁₂ platelets with micro scale size were synthesized by a facile molten salt method. The photocatalytic activities of the as-prepared samples were measured with the photodegradation of methylene blue at room temperature under visible light irradiation. The Bi₄Ti₃O₁₂ with the aspect ratio of 35 exhibited good absorption in the visible light region and the photodegradation against methylene blue was higher than that of anatase TiO₂ reference, showing that the high degree of preferred {001} facets on the plate surface benefits the electronic transmission. In addition, the layer-pervoskite structure facilitates the mobility of the photogenerated carriers and hampers their recombination. The above results indicated that the large specific surface area of the as-prepared samples could attribute to the presence of a number of oxygen vacancies and then lead to the good photo-electric property. This work proposed an alternative way to tailor the structure of micro-sized platelets to get excellent properties comparable to the nano materials.     

A novel construction algorithm of the LDPC code for high-speed long-haul optical transmission systems

According to the transmission characteristics of high-speed long-haul optical transmission system, the main construction method of Low-Density Parity-Check (LDPC) code for optical transmission system is presented and a novel construction algorithm of LDPC code is proposed, the theoretical analysis shows that the parity check matrix of the LDPC code constructed by the proposed construction algorithm has no four-girth phenomenon, this is also theoretically proved out. Both the novel LDPC(3969,3720) code with 6.69% redundancy and the novel LDPC(8281,7920) code with 4.56% redundancy for optical transmission systems are constructed by using the presented construction method and proposed construction algorithm. The simulation results show that the net coding gain (NCG) of the two novel LDPC codes at the eighteenth iteration for the BER of 10^?12 are respectively 1.63 dB and 1.49 dB more than that of the RS(255,239) code in ITU-T G.975. Moreover, the decoding of the LDPC code in the hardware can parallel be implemented, so the decoding speed of the two novel LDPC codes are very rapid, the complexities of implementing the two novel LDPC codes, compared with the concatenated codes in ITU-T G.975.1, are relatively lower, furthermore, the hardware overhead and storage space can relatively be saved and the computation complexity can be reduced in implementing the hardware in the future. As a result, the two novel LDPC codes can better be suitable for high-speed long-haul optical transmission systems.     

基于压缩表示的离子刻蚀仿真三维表面演化方法

为了研究表面演化过程的机理, 提出了一种基于压缩表示的三维表面演化方法来模拟等离子体刻蚀工艺,并着重探讨了对离子刻蚀的仿真. 为了解决三维元胞自动机内存需求量大的问题, 该方法将二维数组和动态存储方式相结合, 既实现元胞信息的无损压缩存储, 又保持三维元胞间的空间相关性. 实验结果也表明该方法不仅节省了大量内存, 而且在高分辨率条件下查找离子初始碰撞的表面元胞效率较高, 满足高分辨率仿真的要求. 将该方法应用于实现刻蚀工艺三维表面仿真中, 模拟结果与实验结果对比验证了该方法的有效性. 关键词： 等离子体刻蚀 元胞自动机 表面演化方法 高分辨率仿真     

Diffraction effects in planar wave-sphere interaction

Using the classical Mie scattering theory,we compute the energy density of an arbitrary partial wave(e.g.,the nth order) and then determine that the interaction between an incident planar wave and a sphere of radius a is the one between the sphere and those partial waves the order of which satisfies n≤ka.We also provide a simple expression to describe the diffracted wave in which the angle-dependent functions are employed.The difference between the accurate and the approximate expressions is demonstrated by numerical calculation.