BN链掺杂的石墨烯纳米带的电学及磁学特性

基于密度泛函理论第一性原理系统研究了BN链掺杂石墨烯纳米带(GNRs)的电学及磁学特性, 对锯齿型石墨烯纳米带(ZGNRs)分非磁态(NM)、反铁磁态(AFM)及铁磁性(FM)三种情况分别进行考虑. 重点研究了单个BN链掺杂的位置效应. 计算发现: BN链掺杂扶手椅型石墨烯纳米带(AGNRs) 能使带隙增加, 不同位置的掺杂, 能使其成为带隙丰富的半导体. BN链掺杂非磁态ZGNR的不同位置, 其金属性均降低, 并能出现准金属的情况; BN链掺杂反铁磁态ZGNR, 能使其从半导体变为金属或半金属(half-metal), 这取决于掺杂的位置; BN链掺杂铁磁态ZGNR, 其金属性保持不变, 与掺杂位置无关. 这些结果表明: BN链掺杂能有效调控石墨烯纳米带的电子结构, 并形成丰富的电学及磁学特性, 这对于发展各种类型的石墨烯基纳米电子器件有重要意义. 关键词： 石墨烯纳米带 BN链掺杂 输运性质 自旋极化     

Metallic nanowires for subwavelength waveguiding and nanophotonic devices

Plasmonics is a rapidly developing field concerning light manipulation at the nanoscale with many potential applications, of which plasmonic circuits are promising for future information technology. Plasmonic waveguides are fundamental elements for constructing plasmonic integrated circuits. Among the proposed different plasmonic waveguides, metallic nanowires have drawn much attention due to the highly confined electromagnetic waves and relatively low propagation loss. Here we review the recent research progress in the waveguiding characteristics of metallic nanowires and nanowire-based nanophotonic devices. Plasmon modes of both cylindrical and pentagonal metallic nanowires with and without substrate are discussed. Typical methods for exciting and detecting the plasmons in metallic nanowires are briefly summarized. Because of the multimode characteristic, the plasmon propagation and emission in the nanowire have many unique properties, benefiting the design of plasmonic devices. A few nanowire-based devices are highlighted, including quarter-wave plate, Fabry-Prot resonator, router and logic gates.     

An image joint compression-encryption algorithm based on adaptive arithmetic coding

Through a series of studies on arithmetic coding and arithmetic encryption, a novel image joint compression- encryption algorithm based on adaptive arithmetic coding is proposed. The contexts produced in the process of image compression are modified by keys in order to achieve image joint compression encryption. Combined with the bit-plane coding technique, the discrete wavelet transform coefficients in different resolutions can be encrypted respectively with different keys, so that the resolution selective encryption is realized to meet different application needs. Zero-tree coding is improved, and adaptive arithmetic coding is introduced. Then, the proposed joint compression-encryption algorithm is simulated. The simulation results show that as long as the parameters are selected appropriately, the compression efficiency of proposed image joint compression-encryption algorithm is basically identical to that of the original image compression algorithm, and the security of the proposed algorithm is better than the joint encryption algorithm based on interval splitting.     

Characterizing neural activities evoked by manual acupuncture through spiking irregularity measures

The neural system characterizes information in external stimulations by different spiking patterns. In order to examine how neural spiking patterns are related to acupuncture manipulations, experiments are designed in such a way that different types of manual acupuncture （MA） manipulations are taken at the ＇Zusanli＇ point of experimental rats, and the induced electrical signals in the spinal dorsal root ganglion are detected and recorded. The interspike interval （ISI） statistical histogram is fitted by the gamma distribution, which has two parameters： one is the time-dependent firing rate and the other is a shape parameter characterizing the spiking irregularities. The shape parameter is the measure of spiking irregularities and can be used to identify the type of MA manipulations. The coefficient of variation is mostly used to measure the spike time irregularity, but it overestimates the irregularity in the case of pronounced firing rate changes. However, experiments show that each acupuncture manipulation will lead to changes in the firing rate. So we combine four relatively rate- independent measures to study the irregularity of spike trains evoked by different types of MA manipulations. Results suggest that the MA manipulations possess unique spiking statistics and characteristics and can be distinguished according to the spiking irregularity measures. These studies have offered new insights into the coding processes and information transfer of acupuncture.     

Ge掺杂n型Sn基VIII型单晶笼合物的制备及热电传输特性

采用Sn自熔剂法制备了具有n型传导的VIII型Ba8Ga16 xGexSn30(0 x 1.0)单晶笼合物,并对其结构和热电特性进行研究.研究结果表明:Ge在单晶中的实际含量较少,随着掺杂量的增加样品的晶格常数略有减小,Ge掺杂后样品的载流子浓度较掺杂前低,迁移率增加;所有样品的Seebeck系数均为负值,且绝对值较未掺杂样品低,但Ge掺杂后样品的电导率提高了62%;x=0.5的样品在500 K附近取得最大ZT值1.25.     

One-dimensional integral imaging based on parallax barrier

One-dimensional integral imaging (1DII) which only has horizontal disparity is a practical solution of high resolution in the vertical direction, low-cost, easy-viewable three-dimensional (3D) display. A 1DII based on a parallax barrier is proposed in this paper. The 1DII consists of a parallax barrier and a display panel. The operation principle and parameter calculation of the 1DII are described in detail. Two prototypes of the proposed 1DII and conventional 1DII based on a lenticular lens array are developed. The proposed 1DII improves the quality of the 3D image and provides larger viewing angle than that based on a lenticular lens array, and it is simpler and has lower cost than that based on a lenticular lens array.     

Thermal modeling optimization and experimental validation for a single, concentrator solar cell system with a heat sink

A single concentrator solar cell model with a heat sink is established to simulate the thermal performance of the system by varying the number, height, and thickness of fins, the base thickness and thermal resistance of the thermal conductive adhesive. Influence disciplines of those parameters on temperatures of the solar cell and heat sink are obtained. With optimized number, height and thickness of fins, and the thickness values of base of 8, 1.4 cm, 1.5 mm, and 2 mm, the lowest temperatures of the solar cell and heat sink are 41.7℃ and 36.3℃ respectively. A concentrator solar cell prototype with a heat sink fabricated based on the simulation optimized structure is built. Outdoor temperatures of the prototype are tested. Temperatures of the solar cell and heat sink are stabilized with time continuing at about 37℃-38℃ and 35℃-36℃ respectively, slightly lower than the simulation results because of effects of the wind and cloud. Thus the simulation model enables to predict the thermal performance of the system, and the simulation results can be a reference for designing heat sinks in the field of single concentrator solar cells.     

High optical-efficiency integral imaging display with a gradient-aperture parallax barrier

We propose a one-dimensional integral imaging (1DII) display that consists of a display panel and a gradient-aperture parallax barrier. The gradient-aperture parallax barrier is symmetrical, and its slit widths gradually increase from both sides to the middle. The leftmost and rightmost slits are used to fix the viewing angle, whereas the other slits are used to increase the optical efficiency. A prototype of the proposed 1DII display is developed. Its optical efficiency is higher than that of the conventional display, but the viewing angles are the same.     

Calibrating an optical fiber humidity sensor and applying it in real-time monitoring of relative humidity in fresh concrete

A doubly cladding single-mode fiber humidity sensor is fabricated by agarose. The sensor has an insertion loss of -0.08 dB and a power change of -17.83 dB. The responses of the sensor to a relative humidity （RH） range form 30% to 100% at a temperature range form 25 to 34 ~C are validated. The experiments demonstrate that the absorbability of agarose gel to moisture decreases with increasing RH in measured gas. We propose a calibration method that uses lookup tables and construct a corresponding calibration matrix. Using the sensor, we conduct real-time monitoring of RH in fresh concrete during its hardening nrocess.     

Effect of magnetic field on the TC and magnetic properties for the aligned MnBi compound

In the compound MnBi, a first-order transition from the paramagnetic to the ferromagnetic state can be triggered by an applied magnetic field and the Curie temperature increases nearly linearly with an increase in magnetic field by ∼2 K/T. Under a field of 10 T, T_C increases by 20 and 22 K during heating and cooling, respectively. Under certain conditions a reversible magnetic field or temperature induced transition between the paramagnetic and ferromagnetic states can occur. A magnetic and crystallographic H-T phase diagram for MnBi is given. Magnetic properties of MnBi compound aligned in a Bi matrix have been investigated. In the low temperature phase MnBi, a spin-reorientation takes place during which the magnetic moments rotate from being parallel to the c-axis towards the basal plane at ∼90 K. A measuring Dc magnetic field applied parallel to the c-axis of MnBi suppresses partly the spin-reorientation transition. Interestingly, the fabricated magnetic field increases the temperature of spin-reorientation transition T_s and the change in magnetization for MnBi. For the sample solidified under 0.5 T, the change in magnetization is ∼70% and T_s is ∼91 K.