会"飞"的列车

2002年12月31日建成通车的上海磁悬浮列车是世界上第一条投入商业化磁浮示范运营线．从浦东的龙阳路到浦东机场，8分钟就滑过30km的距离，最高时速可达430km／h．     

斜磁场作用下碰撞电负性等离子体鞘层的玻姆判据

采用流体模型研究了外加斜磁场作用下的碰撞电负性等离子体鞘层的玻姆判据, 讨论了负离子和磁场对鞘层玻姆判据的影响. 研究结果表明: 在电负性鞘层中, 正离子更容易进入鞘层, 负离子的存在只能影响离子马赫数取值的下限; 而外加磁场可以使离子马赫数的取值范围整体发生移动.     

溶剂热合成法制备的Zn1-xMnxO和Zn1-2xMnxLixO纳米材料的磁学性质

用溶剂热合成法在160oC制备出Zn_1-xMn_xO纳米棒和Zn_1-2xMn_xLi_xO纳米颗粒. XRD和拉曼测试结果表明Mn离子已很好地掺入ZnO母体中. M-H图中未观察到磁回滞,ESR谱中的精细结构说明掺杂的Mn离子间没有铁磁相互作用. 共掺Li仅仅改变了产物的形貌,并不能改变其磁学性质.     

Random Sierpinski network with scale-free small-world and modular structure

In this paper, we define a stochastic Sierpinski gasket, on the basis of which we construct a network called random Sierpinski network (RSN). We investigate analytically or numerically the statistical characteristics of RSN. The obtained results reveal that the properties of RSN is particularly rich, it is simultaneously scale-free, small-world, uncorrelated, modular, and maximal planar. All obtained analytical predictions are successfully contrasted with extensive numerical simulations. Our network representation method could be applied to study the complexity of some real systems in biological and information fields.     

激光熔覆原位合成Nb(C,N)陶瓷颗粒增强铁基金属涂层

采用预涂粉末激光熔覆技术,在42CrMo基体上制备出原位合成Nb(C, N)颗粒增强的铁基复合涂层。X射线及扫描电镜分析结果表明：激光熔覆获得的涂层基体为耐氧化、耐蚀性良好的Fe-Cr细晶组织及少量的-Fe相,原位合成的Nb（C, N）呈块状弥散分布在基体上。进一步的磨损试验表明：这些颗粒增强相极大增强了抗磨损性能,与未熔覆的母材相比,其磨损失重仅为母材的1/9左右; 涂层在750 ℃恒温氧化条件下具有较好的抗氧化性能,氧化层主要由NbO1.1,Cr2O3相组成; 母材的氧化产物为Fe2O3,容易脱落,保护性能较差; 激光熔覆涂层的氧化膜厚度仅为未涂层的1/5。     

汉语降频助听算法的实验分析与改进

降频助听算法是改善听障患者声音辨识能力的最安全有效的方法. 本文以主观测试实验为手段, 通过分析当前算法的声音识别能力的不足, 提出一种自适应慢放降频算法. 算法结合慢放算法和频移算法的优点, 并能根据信号的频谱结构, 自适应调整慢放因子, 降低时域不同步性. 并且, 通过分析含噪信号和噪声信号的频谱关系, 提出一种噪声下的慢放因子评估方法. 实验结果显示, 同其他降频算法相比, 该算法可以提高15%到20%的识别率. 在对听障患者的测试中, 同传统的助听设备相比, 平均识别率也获得显著改善.     

金纳米球壳对的局域表面等离激元共振特性分析

应用有限元方法, 研究金纳米球壳对的几何结构参数及物理参量对其表面等离激元共振的散射及消光光谱的影响, 并根据等离激元杂化理论进行了理论分析. 结果表明, 随着金壳厚度的增加, 金纳米球壳对的散射及消光共振峰先发生蓝移而后红移, 而随着金纳米球壳间隙的减小, 或者随着金纳米球壳的内核尺寸或内核介质折射率的增大, 散射及消光共振峰均发生红移; 随着金壳厚度或内核尺寸减小, 或者随着内核介质折射率增大, 金纳米球壳对的散射与消光共振强度减弱, 而随着金壳间隙的减小, 金纳米球壳对的散射共振强度先增强后减弱, 而消光共振强度逐渐增强, 数值模拟与理论分析一致.     

Modal interferometer based on tapering single-mode-multimode-single-mode fiber structure by hydrogen flame

A modal interferometer is experimentally demonstrated based on tapering a single-mode-multimode-singlemode (SMS) fiber structure heated by hydrogen flame.The interference fringe begins to form when tapering length is 19.8 mm,and becomes regular and clear when the tapering length is longer and the tapered waist diameter is smaller.Annealing process is undertaken to achieve a high extension ratio of approximately 17 dB with free spectral range of 1.5 nm when the tapering length is 33 mm and the tapered waist diameter is approximately 5μm.The temperature and axial strain dependences of the tapered SMS structure are characterized,and the measured temperature and strain coefficients are +7 pm/℃and -9.536 pm/με, respectively.     

Percolative effects and giant dielectric tunability of BaTiO3–LuFe2O4 composites

We report on exotic dielectric properties of composite materials consisting of traditional ferroelectric BaTiO₃ and electronic ferroelectric LuFe₂O₄. The composites were synthesized by a simple ceramic processing method with properties that can be tailored by adjusting LuFe₂O₄ concentration. A percolative effect was observed at the volume fraction of ～0.26, which led to an abrupt increase in the dielectric permittivity. For composites with high LuFe₂O₄ fractions, a giant dielectric tunability was observed over a broad temperature interval, which is in strong contrast to traditional ferroelectrics.