A novel super-FEC code based on concatenated code for high-speed long-haul optical communication systems

The structures of the novel super forward error correction (Super-FEC) code type based on the concatenated code for high-speed long-haul optical communication systems are studied in this paper. The Reed-Solomon (RS) (255, 239) + Bose-Chaudhuri-Hocguenghem (BCH) (1023, 963) concatenated code is presented after the characteristics of the concatenated code and the two Super-FEC code type presented in ITU-T G.975.1 have theoretically been analyzed, the simulation result shows that this novel code type, compared with the RS (255, 239) + convolutional-self-orthogonal-code (CSOC) (k₀/n₀ = 6/7, J = 8) code in ITU-T G.975.1, has a lower redundancy and better error-correction capabilities, and its net coding gain (NCG) at the third iteration is 0.57 dB more than that of RS (255, 239) + CSOC (k₀/n₀ = 6/7, J = 8) code in ITU-T G.975.1 at the third iteration for the bit error rate (BER) of 10⁻¹². Therefore, the novel code type can better be used in long-haul, larger capacity and higher bit-rate optical communication systems. Furthermore, the design and implementation of the novel concatenated code type are also discussed.     

Ti-50.8at%Ni马氏体相变中的电磁特性

研究Ti-50.8at%Ni合金在马氏体-奥氏体相变温度附近的电磁性质.由M-H曲线分析了传导电子的顺磁性以及少量局域电子引起的铁磁性.在M-T曲线中，降温曲线在180K附近有突降，升温曲线在230K附近有突升.在电阻率测量中，降温和升温的ρ-T曲线也有类似的突变.升温过程的质量热容c_p曲线在230K附近出现了由奥氏体相变引起的跳跃.这些实验结果表明，样品的马氏体相变温度约 关键词： TiNi合金 电磁性质 马氏体-奥氏体相变 质量热容     

Adaptive control of chaotic systems based on a single layer neural network

This Letter presents an adaptive neural network control method for the chaos control problem. Based on a single layer neural network, the dynamic about the unstable fixed period point of the chaotic system can be adaptively identified without detailed information about the chaotic system. And the controlled chaotic system can be stabilized on the unstable fixed period orbit. Simulation results of Henon map and Lorenz system verify the effectiveness of the proposed control method.     

水下高光谱衰减测量的不确定度分析

研究了水下高光谱衰减测量仪(ACS)的不确定度。通过不同粒径的标准颗粒(2,5,10,20μm)的米氏散射理论计算值与紫外-可见分光光度计(PE35)的实测值对比,得出:PE35的衰减测量误差最大不超过8%。针对我国高浑浊水体环境,利用ACS与PE35对我国东海浑浊海水样品进行衰减同步测量,结果表明:ACS在浑浊水体下的测量结果被低估,其不确定度与波长呈负相关;水体的浊度对ACS衰减测量的不确定度影响较大,且呈正相关,在低浊度水体下ACS(10 cm)的测量值被低估17.2%~19.04%,ACS(25 cm)的测量值被低估7.84%~15.36%,在高浊度水体下ACS(10 cm)的低估则增至26.4%~28.24%。     

氢化与非氢化石墨烯纳米条带的密度泛函研究

基于密度泛函理论的第一性原理计算方法,研究了宽度N=8的边缘氢化和非氢化条带的结构和电子性质. 研究表明,扶手形无氢化石墨纳米条带的边缘碳原子是以三重键相互结合,它在边缘的成键强度比氢化时要高,具有更强的化学活性,可作为纳米化学传感器的基础材料. 能带结构计算表明,无论是扶手形条带还是锯齿形条带,它们都是具有带隙的半导体,且无氢化条带的带隙要比氢化的条带带隙宽度大,氢化对于条带的电子性质具有显著修饰作用. 通过锯齿形石墨纳米条带顺磁性、铁磁性和反铁磁性的计算,发现反铁磁的状态最稳定,并且边缘磁性最强,这有利于条带在自旋电子器件中的应用. 关键词： 石墨纳米条带 成键机理 电子结构 自旋分布     

Ti/TiO_2包覆ZnO:Tb纳米纤维的光学性质

用电纺丝方法制备了ZnO:Tb纳米纤维.用X-射线衍射、Raman光谱对其形貌做了表征.结果显示,ZnO:Tb纳米纤维为六方纤锌矿结构,Tb掺杂对ZnO的结晶性有影响.利用表面等离激元,通过对纳米纤维表面包覆金属Ti和TiO_2,比较了其光致发光谱,得到在325 nm激发下ZnO:Tb纳米纤维中稀土发光效率低的原因是ZnO和Tb之间不能进行有效的能量传递;包覆TiO_2后能提高稀土发光效率.     

Geometric conservation law and applications to high-order finite difference schemes with stationary grids

The geometric conservation law (GCL) includes the volume conservation law (VCL) and the surface conservation law (SCL). Though the VCL is widely discussed for time-depending grids, in the cases of stationary grids the SCL also works as a very important role for high-order accurate numerical simulations. The SCL is usually not satisfied on discretized grid meshes because of discretization errors, and the violation of the SCL can lead to numerical instabilities especially when high-order schemes are applied. In order to fulfill the SCL in high-order finite difference schemes, a conservative metric method (CMM) is presented. This method is achieved by computing grid metric derivatives through a conservative form with the same scheme applied for fluxes. The CMM is proven to be a sufficient condition for the SCL, and can ensure the SCL for interior schemes as well as boundary and near boundary schemes. Though the first-level difference operators δ₃ have no effects on the SCL, no extra errors can be introduced as δ₃ = δ₂. The generally used high-order finite difference schemes are categorized as central schemes (CS) and upwind schemes (UPW) based on the difference operator δ₁ which are used to solve the governing equations. The CMM can be applied to CS and is difficult to be satisfied by UPW. Thus, it is critical to select the difference operator δ₁ to reduce the SCL-related errors. Numerical tests based on WCNS-E-5 show that the SCL plays a very important role in ensuring free-stream conservation, suppressing numerical oscillations, and enhancing the robustness of the high-order scheme in complex grids.     

Theoretical studies of the optical and EPR spectra for Fe ion in the MF3:Fe (M=Al, Ga) systems

By analyzing the EPR spectra of Fe³⁺ ion in the fluorinde glasses, the local lattice structures around impurity Fe³⁺ ion in MF₃:Fe³⁺ (M=Al, Ga) systems have been studied by means of diagonalizing the complete energy matrices of the electron-electron repulsion, the ligand-field and the spin-orbit coupling for a d⁵ configuration ion in a trigonal ligand-field. Both the second-order and fourth-order EPR parameters D and (a−F) are taken simultaneously in the structural investigation. The results indicate that the local lattice structure around octahedral Fe³⁺ center has an expansion distortion for Fe³⁺ in MF₃:Fe³⁺ (M=Al, Ga). The expansion distortion may be ascribed to the fact that the radius of Fe³⁺ ion is larger than that of Al³⁺ ion and Ga³⁺ ion, and the Fe³⁺ ion will push the fluoride ligands upwards and downwards, respectively. The local lattice structure parameters R=1.927 A, θ=55.538° for Fe³⁺ in AlF₃:Fe³⁺ and R=1.931 A, θ=56.09° for Fe³⁺ in GaF₃:Fe³⁺ are determined, respectively, and the EPR spectra of the MF₃:Fe³⁺ (M=Al, Ga) systems are satisfactorily explained.     

A pigment (CuS) identified by micro‐Raman spectroscopy on a Chinese funerary lacquer ware of West Han Dynasty

A blue pigment was identified by micro‐Raman spectroscopy, X‐ray fluorescence spectroscopy (XRF), scanning electron microscopy (SEM)/energy dispersive X‐ray (EDX) and X‐ray diffraction (XRD). The test sample, a funerary lacquer tray, belongs to West Han Dynasty (206 BC–AD 8) of China and was decorated with faint blue patterns. The result from Raman spectroscopy showed that the faint blue is covellite (CuS) due to the presence of a characteristic peak at 474.5 cm⁻¹, which further was confirmed by XRF, SEM–EDX and XRD. This research indicated that CuS had been used as a blue pigment to decorate lacquer wares from the West Han Dynasty in China. Copyright © 2009 John Wiley & Sons, Ltd.