Dynamic modification of the capillary wall for electrophoretic separations of small ions

Separations of small ions were carried out under nonequilibrated conditions using capillaries treated with NaOH, HCl, or tris(hydroxymethyl)aminomethane (Tris) prior to analysis. For separations of benzoic acid isomers or acids and amines under weakly acidic conditions, capillaries flushed with 0.1 M NaOH and subsequently with running buffers prior to analysis were used. Separations of six benzoic acid isomers were accomplished in 4 min in 1 mM phosphate buffers, pH 4.01, containing 2.5 mM hydroxypropyl-beta-cyclodextrin. Without additives, the separation of biological amines and acids were also achieved in 10 min at pH 4.01. Capillaries treated with 0.1 M HCl prior to analysis were tested in separations of six phenols in 5 mM Tris solutions at pH 7.0. As a result of small electrophoretic mobilities of phenols against a small electroosmotic flow, resolution was optimized. We also found that reproducibility was improved using capillaries treated with HCl. The relative standard deviations of migration mobility of phenols were less than 1%, which were smaller than those obtained using capillaries treated with 0.1 M NaOH or Tris.     

Effect of ionic strength, pH and polymer concentration on the separation of DNA fragments in the presence of electroosmotic flow

DNA separations in the presence of electroosmotic flow (EOF) using poly(ethylene oxide) (PEO) solutions have been demonstrated. During the separations, PEO entered capillaries filled with Tris-borate (TB) free buffers by EOF and acted as sieving matrices. We have found that ionic strength and pH of polymer and free solutions affect the bulk EOF and resolution differently from that in capillary zone electrophoresis. The EOF coefficient increases with increasing ionic strength of the free TB buffers as a result of decreases in the adsorption of PEO molecules. In contrast, the bulk EOF decreases with increasing the ionic strength of polymer solutions using capillaries filled with high concentrations of free TB buffers. Although resolution values are high due to larger differential migration times between any two DNA fragments in a small bulk EOF using 10 mM TB buffers, use of a capillary filled with at least 100 mM TB free buffers is suggested for high-speed separations. On the side of PEO solutions, 1.5% PEO solutions prepared in 100 to 200 mM TB buffers are more proper in terms of resolution and speed. The separation of DNA markers V and VI was accomplished less than 29 min in 1.5% PEO solutions prepared in 100 mM TB buffers, pH 7.0 at 500 V/cm using a capillary filled with 10 mM free TB buffers, pH 7.0.     

Analysis of Petroleum Distillates from Fire Debris Using Supercritical Fluid Extraction with a Two‐Level Orthogonal Array Experimental Design

A supercritical fluid extraction (SFE) method was developed in the present study as an effective sample pretreatment technique of petroleum distillates from fire debris. Three petroleum distillates were used as target analytes, including 95 unleaded gasoline, kerosene, and premium diesel. An orthogonal array (L16) experimental design was adopted to separately evaluate primary SFE experimental factors. The SFE efficiencies of petroleum distillates at various extraction conditions were examined and the optimized SFE conditions were identified. Experimental results demonstrated that the optimized SFE method not only provided an effective extraction method for the spiked sample, but also successfully recovered residues of petroleum distillates from fire debris.     

Spectrophotometric determination of deacetylation degree of chitinous materials dissolved in phosphoric acid

A simple spectrophotometric method is proposed for determining deacetylation degrees (DD) of chitinous materials using phosphoric acid as the UV-transparent solvent system. Calibrating by the extinction coefficients (A(210)) of D-glucosamine and N-acetyl-D-glucosamine, DD values (24-88%) were computed numerically. The results correlated well (R(2) = 0.9805, n = 50) with those obtained by solid-state (13)C NMR. Comparison of the results obtained by the proposed UV method and solid-state (13)C NMR.     

Chemical Constituents from the Stems of Mahonia Japonica

A new dihydroberberine alkaloid, 7,8‐dihydro‐8‐methoxyberberine ( 1 ), along with six known compounds including two dihydroberberine alkaloids, 7,8‐dihydro‐8‐hydroxyberberine ( 2 ) and oxyberberine ( 3 ) and four protoberberine alkaloids, berberine ( 4 ), palmatine ( 5 ), jatrorrhizine ( 6 ) and columbamine ( 7 ), were isolated from the stems of Mahonia japonica. These compounds were characterized and identified by physical and spectral evidence.     

Probing the Adhesion of Hepatocellular Carcinoma HepG2 and SK‐Hep‐1 Cells

Carcinoma cell differentiation stage is an important indicator of cell behavior. For example, cell mobility is much higher for poorly‐differentiated hepatocellular carcinoma SK‐Hep‐1 cells than for well‐differentiated HepG2 cells. In this study, we have cultured HepG2 and SK‐Hep‐1 cells on chemically patterned polydimethylsiloxane (PDMS) substrates to observe differences in the adhesion properties and cell structure that occur due to the patterns. Both cell lines showed a preference for the hydrophobic regions on the patterned PDMS surface with SK‐Hep‐1 cells achieving a higher density than HepG2 for the same cell‐count solutions. Further, SK‐Hep‐1 cells adopted the square or hexagonal shape of the surface patterns while HepG2 cells maintained their more rounded shape. AFM force measurement arrays were also performed on the cell surfaces to measure and map adhesion values between the tip and cell surface membrane. These results demonstrate that, in addition to cell shape and size, adhesion expression in hepatocellular carcinoma cells is differentiation stage dependent. Further, the ability of the SK‐Hep‐1 cells to adopt the shape of the substrate pattern indicates they are more structurally labile, which may contribute to their higher mobility.     

Chelating and Tellurolate Ligand‐Transfer Studies of the Complex fac‐[Fe(CO)3(TePh)3]−: Crystal Structures of Heterodinuclear (CO)3Mn(μ‐TePh)3Fe(CO)3 and CpNi(TePh)(PPh3)

Complex fac‐[Fe(CO)₃(TePh)₃]^? was employed as a “metallo chelating” ligand to synthesize the neutral (CO)₃Mn(μ‐TePh)₃Fe(CO)₃ obtained in a one‐step synthesis by treating fac‐[Fe(CO)₃(TePh)₃]^? with fac‐[Mn‐(CO)₃(CH₃CN)₃]⁺. It seems reasonable to conclude that the d⁶ Fe(II) [(CO)₃Fe(TePh)₃]^? fragment is isolobal with the d⁶ Mn(I) [(CO)₃Mn(TePh)₃]^2? fragment in complex (CO)₃Mn(μ‐TePh)₃Fe(CO)₃. Addition of fac‐[Fe(CO)₃(TePh)₃]^? to the CpNi(I)(PPh₃) in THF resulted in formation of the neutral CpNi(TePh)(PPh₃) also obtained from reaction of CpNi(I)(PPh₃) and [Na][TePh] in MeOH. This investigation shows that fac‐[Fe(CO)₃(TePh)₃]^? serves as a tridentate metallo ligand and tellurolate ligand‐transfer reagent. The study also indicated that the fac‐[Fe(CO)₃(SePh)₃]^? may serve as a better tridentate metallo ligand and chalcogenolate ligand‐transfer reagent than fac‐[Fe(CO)₃(TePh)₃]^? in the syntheses of heterometallic chalcogenolate complexes.     

Phenylated poly(P-phenylene vinylenes) prepared via the chlorine precursor route (CPR)

The synthesis of several highly phenylated PPV derivatives by a chlorine precursor route (CPR) was investigated in order to understand its scope. Three 1,4-bis(chloromethyl)benzene monomers were prepared via a robust and versatile synthetic procedure involving the Diels-Alder reaction. The monomers were then polymerized to the corresponding precursor polymers with about 1.0 equivalent of potassium t-butoxide in THF. Only one monomer gave a soluble precursor polymer while the other two gave insoluble precursor polymers. The soluble precursor polymer was deposited as thin films and then converted to the corresponding PPV derivative, which showed green photoluminesence and electroluminesence.     

Stereoelectronic Basis for the Kinetic Resolution of N‐Heterocycles with Chiral Acylating Reagents

The kinetic resolution of N‐heterocycles with chiral acylating agents reveals a previously unrecognized stereoelectronic effect in amine acylation. Combined with a new achiral hydroxamate, this effect makes possible the resolution of various N‐heterocycles by using easily prepared reagents. A transition‐state model to rationalize the stereochemical outcome of this kinetic resolution is also proposed.