Direct determination of nucleosides in the urine of patients with breast cancer using column-switching liquid chromatography-tandem mass spectrometry

We developed an analytical method for a simple, sensitive and simultaneous determination of oxidized nucleosides in urine using column-switching liquid chromatography-electrospray/tandem mass spectrometry (LC-ESI/MS/MS). We connected two columns through a six-way switching valve and effectively separated nucleosides in the urine from the interference by column-switching liquid chromatography. We monitored separated nucleosides using positive ionization tandem mass spectrometry in selective reaction monitoring (SRM) mode. The calibration ranges of nucleosides were 0.2-100 nmol/mL. The linearity of the method was 0.994-0.999, and the limits-of-detection (LOD) at a signal-to-noise (S/N) ratio of 3 were 0.1-0.2 nmol/mL. The coefficients of variation were in the range 2.28-11.74% for within-day variation and 4.36-11.15% for day-to-day variation, respectively. To explore the relationship between breast cancer and the nucleosides level in human urine, we measured the concentrations of nucleosides in female patients with breast cancer (n = 30) and in normal female subjects (n = 30). The concentration of nucleosides was significantly increased in patients with breast cancer when compared with the normal controls (1-methyladenosine; p < 0.005, N(2),N(2)-dimethylguanosine; p < 0.01, 5-hydroxymethyl-2'-deoxyuridine; p < 0.001, 8-hydroxy-2-deoxyguanosine; p < 0.001). Therefore, the elevated levels of nucleosides could be used as an important biomarker for breast-cancer research.     

NMR and FT-IR Investigation of Spinel LiMn2O4 Cathode Prepared by the Tartaric Acid Gel Process

The structure of the lithium manganese tartrate precursor and the synthesis mechanism of LiMn₂O₄ were investigated by FT-IR, NMR, TG/DSC, and XRD in this study. The results of FT-IR and ⁷Li and ¹³C NMR measurements revealed that lithium ions bond with carboxylic acid ligands and the O–H stretching modes of tartaric acid. Manganese ion bonds only with carboxylic acid. Lithium and manganese ions were trapped homogeneously on an atomic scale throughout the precursor. Such a structure eliminates the need for long-range diffusion during the formation of lithium manganese oxides. Therefore, spinel LiMn₂O₄ was synthesized at temperatures as low as 300°C. In this work, the electrochemical properties of Li/Li_xMn₂O₄ were studied. It is clear that the discharge curves exhibit two pseudo plateaus as the LiMn₂O₄ is fired to higher temperatures. The discharge capacity of LiMn₂O₄ increases from 84 to 117 mAh/g as the calcination temperature increases from 300 to 500°C. The LiMn₂O₄ powders calcined at low temperatures with a high specific surface area and an average valence of manganese exhibit a better cycle life.     

Structure and thermoelectric properties of the new quaternary bismuth selenides A(1-x)M(4-x)Bi(11+x)Se21 (A = K and Rb and Cs; M = Sn and Pb)--members of the grand homologous series Km(M6Se8)m(M(5+n)Se(9+n))

Several members of the new family A(1-x)M(4-x)Bi(11+x)Se21 (A = K, Rb, Cs; M = Sn, Pb) were prepared by direct combination of A2Se, Bi2Se3, Sn (or Pb), and Se at 800 degrees C. The single-crystal structures of K(0.54)Sn(3.54)Bi(11.46)Se21, K(1.46)Pb(3.08)Bi(11.46)Se21, Rb(0.69)Pb(3.69)Bi(11.31)Se21, and Cs(0.65)Pb(3.65)Bi(11.35)Se21 were determined. The compounds A(1-x)M(4-x)Bi(11+x) Se21 crystallize in a new structure type with the monoclinic space group C2/m, in which building units of the Bi2Te3 and NaCl structure type join to give rise to a novel kind of three-dimensional anionic framework with alkali-ion-filled tunnels. The building units are assembled from distorted, edge-sharing (Bi,Sn)Se6 octahedra. Bi and Sn/Pb atoms are disordered over the metal sites of the chalcogenide network, while the alkali site is not fully occupied. A grand homologous series Km(M6Se8)m(M(5+n)Se(9+n)) has been identified of which the compounds A(1-x)M(4-x)Bi(11+x)Se21 are members. We discuss here the crystal structure, charge-transport properties, and very low thermal conductivity of A(1-x)M(4-x)Bi(11+x)Se21.     

Soluble and easily crystallized anthracene derivatives: precursors of solution-processable semiconducting molecules

New soluble anthracene derivatives containing thiophene and phenylenevinylene derivatives were synthesized via well-known synthetic routes. TIPS derivatives were added at the 9,10-positions of anthracene for the solubility and crystallinity. Both of the molecules were found to be promising for high charge mobility and stable organic semiconductors. The soluble anthracene core (TIPSAnt) is a potential precursor for the synthesis of novel semiconducting materials.     

Relaxation dynamics of 2,7- and 3,6-distyrylcarbazoles in solutions and in solid films: mechanism for efficient nonradiative deactivation in the 3,6-linked carbazole

We performed time-resolved spectral investigations of two distyrylcarbazole derivatives, 2,7- and 3,6-distyrylcarbazole (2,7-DPVTCz and 3,6-DPVTCz, respectively), in dilute toluene solution and in solid films mixed with poly(methyl methacrylate) (PMMA). The lifetime of 2,7-DPVTCz in its excited state in solution is approximately 100 times as great as that of 3,6-DPVTCz, consistent with their photophysical nature. The former shows intense emission, but the latter is nearly nonfluorescent in a free environment. Moreover, the lifetime of 3,6-DPVTCz in its excited state increased also approximately 100 times when the molecule was encapsulated in a 3,6-DPVTCz/PMMA solid film, indicating that intramolecular motion of the molecule significantly affects the observed relaxation dynamics in a confined environment. Calculations on the excited states indicate that an efficient intersystem crossing is activated upon twisting of the bridged C-C single bond in a free 3,6-linked carbazole; such efficient deactivation is impractical in 2,7-linked carbazole or for 3,6-linked carbazole in a PMMA matrix. Information obtained from experiments on femtosecond fluorescence enables us to distinguish crucial relaxation processes in the excited state for a profound understanding of the details of vibrational and electronic relaxations of 3,6-DPVTCz in solution.     

Biflavone glucosides from Ginkgo biloba yellow leaves

Phytochemical investigation of Ginkgo biloba (Ginkgoaceae) has resulted in the isolation of two new biflavone glucosides, ginkgetin 7'-O-beta-D-glucopyranoside (1) and isoginkgetin 7-O-beta-D-glucopyranoside (2). The structures were determined on the basis of chemical and spectroscopic evidences.     

Clicked Isoreticular Metal–Organic Frameworks and Their High Performance in the Selective Capture and Separation of Large Organic Molecules

Three highly porous metal–organic frameworks (MOFs) with a uniform rht‐type topological network but hierarchical pores were successfully constructed by the assembly of triazole‐containing dendritic hexacarboxylate ligands with Zn^II ions. These transparent MOF crystals present gradually increasing pore sizes upon extension of the length of the organic backbone, as clearly identified by structural analysis and gas‐adsorption experiments. The inherent accessibility of the pores to large molecules endows these materials with unique properties for the uptake of large guest molecules. The visible selective adsorption of dye molecules makes these MOFs highly promising porous materials for pore‐size‐dependent large‐molecule capture and separation.     

Dye‐Sensitized Solar Cell Counter Electrodes Based on Carbon Nanotubes

Dye‐sensitized solar cells (DSSCs) have received significant attention from the scientific community since their discovery in 1991. However, the high cost and scarcity of platinum has motivated researchers to seek other suitable materials for the counter electrode of DSSCs. Owing to their exceptional properties such as high conductivity, good electrochemical activity, and low cost, carbon nanotubes (CNTs) have been considered as promising alternatives to expensive platinum (Pt) in the counter electrode of DSSCs. Herein, we provide a Minireview of the CNTs use in the counter electrode of DSSCs. A brief overview of Pt‐based counter electrodes is also discussed. Particular attention is given to the recent advances of counter electrodes with CNT‐based composite structures.     

Functionalized Alkynylplatinum(II) Polypyridyl Complexes for Use as Sensitizers in Dye‐Sensitized Solar Cells

A series of platinum(II) alkynyl‐based sensitizers has been synthesized and found to show light‐to‐electricity conversion properties. These dyes were developed as sensitizers for the application in nanocrystalline TiO₂ dye‐sensitized solar cells (DSSCs). Their photophysical and electrochemical properties were studied. The excited‐state property was probed using nanosecond transient absorption spectroscopy, which showed the formation of a charge‐separated state that arises from the intramolecular photoinduced charge transfer from the platinum(II) alkynylbithienylbenzothiadiazole moiety (donor) to the polypyridyl ligand (acceptor). A lifetime of 3.4 μs was observed for the charge‐separated state. A dye‐sensitized solar cell based on one of the complexes showed a short‐circuit photocurrent of 7.12 mA cm^?2, an open circuit voltage of 780 mV, and a fill factor of 0.65, thus giving an overall power conversion efficiency of 3.6 %.     

Micro fabrication of microlens arrays by micro dispensing

In this study, master of the microlens arrays is fabricated using micro dispensing technology, and then electroforming technology is employed to replicate the Ni mold insert of the microlens arrays. Finally, micro hot embossing is performed to replicate the molded microlens arrays from the Ni mold insert. The resin material is used as the dispensing material, which is dropped on a glass substrate. The resin is exposed to a 380 W halogen light. It becomes convex under surface tension on the glass substrate. A master for the microlens arrays is then obtained. A 150‐nm‐thick copper layer is sputtered on the master as an electrically conducting layer. The electroforming method replicates the Ni mold insert from the master of the microlens arrays. Finally, micro hot embossing is adopted to replicate the molded microlens arrays. The micro hot embossing experiment employs optical films of polymethylmethacrylate (PMMA) and polycarbonate (PC). The processing parameters of micro hot embossing are processing temperature, embossing pressure, embossing time, and de‐molding temperature. Taguchi's method is applied to optimize the processing parameters of micro hot embossing for molded microlens arrays. An optical microscope and a surface profiler are utilized to measure the surface profile of the master, the Ni mold insert and the molded microlens arrays. AFM is employed to measure the surface roughness of the master, the Ni mold insert and the molded microlens arrays. The sag height and focal length are determined to elucidate the optical characteristics of the molded microlens arrays. Copyright © 2009 John & Sons, Ltd.