Optimization of SIMS analytical parameters for water content measurement of olivine

Secondary ion mass spectrometry (SIMS) has a wide range of applications in Earth Science research, thanks to its high precision and sensitivity, and its capacity in direct insitu micromeasurement. The technique is operated in ultra-high vacuum (UHV) conditions, especially for the measurement of volatiles such as hydrogen, or the water content in nominally anhydrous minerals (NAMs). To minimize the water background and obtain accurate and precise water contents in NAMs (eg, olivine) critical parameters such as presputtering time, field aperture (FA), dynamic transfer on/off, and primary beam current intensity were investigated for a CAMECA IMS 1280-HR system. When the chamber vacuum reaches approximately 2 × 10⁻⁹ mbar, we set the DTOS OFF, raster size to 50 μm and primary beam current to 5 nA, and used 2000 μm FA and 170-second presputtering time. Consequently, an approximately 1.2 ppmw water background and 3.6 ppmw limit of detection (LOD) were yielded, from analyzing the San Carlos olivine. Meanwhile, the water content and homogeneity of a range of olivine minerals were characterized for potential use as reference materials for SIMS water content measurement. Olivine water content calibration curve was also established by comparing the Fourier transform infrared (FTIR) results with the SIMS-measured ¹⁶O¹H⁻/¹⁶O⁻ ratios. Accuracy and precision of water content measurement were estimated to be better than approximately 10% in this study.     

The inhibition profiles of 4'-acylpyrrole–5-fluoroindolin-2-ones with a C-3' side chain for VEGFR2, PDGFR-β, and FGFR-1 protein kinases

In this study, we reported the inhibition profiles of 4′-acylpyrrole–5-fluoroindolin-2-one 3 with a C-3′ side chain for VEGFR2, PDGFR-β, and FGFR-1 protein kinases. The pyrrole-fused cyclohexanone moiety provided 3 with the best potency to inhibit the three kinases, and the C-3′ side chains contributed to the different inhibition profiles of 3 . Compound 3b with a C-3′ 2-carboxylethyl side chain showed good potency for the three kinase (IC₅₀: 25–260 nM), and compound 3g with a N,N-dialkyl-2-carbamoylethyl side chain was more active for VEGFR2 (IC₅₀: 59 nM) and PDGFR-β (IC₅₀: 16 nM) than FGFR-1 (IC₅₀: 1.7 μM). The C-3′ 3-(dialkylamino)propyl side chain accomplished 3h – j as selective PDGFR-β inhibitors (IC₅₀: 7.8–13 nM). Compound 3b was further investigated and found potent to inhibit VEGF- and FGF-dependent cell proliferation with moderate in vivo anticancer activity. Results from docking simulations revealed that the interactions of 3b with VEGFR2 and FGFR-1 which could account for the different inhibition profiles of 3 .     

Deciphering an Abnormal Layered-Tunnel Heterostructure Induced by Chemical Substitution for the Sodium Oxide Cathode

Demands for large-scale energy storage systems have driven the development of layered transition-metal oxide cathodes for room-temperature rechargeable sodium ion batteries (SIBs). Now, an abnormal layered-tunnel heterostructure Na_0.44Co_0.1Mn_0.9O₂ cathode material induced by chemical element substitution is reported. By virtue of beneficial synergistic effects, this layered-tunnel electrode shows outstanding electrochemical performance in sodium half-cell system and excellent compatibility with hard carbon anode in sodium full-cell system. The underlying formation process, charge compensation mechanism, phase transition, and sodium-ion storage electrochemistry are clearly articulated and confirmed through combined analyses of in situ high-energy X-ray diffraction and ex situ X-ray absorption spectroscopy as well as operando X-ray diffraction. This crystal structure engineering regulation strategy offers a future outlook into advanced cathode materials for SIBs.     

Engineering Sensitized Photon Upconversion Efficiency via Nanocrystal Wavefunction and Molecular Geometry

Triplet energy transfer from inorganic nanocrystals to molecular acceptors has attracted strong attention for high‐efficiency photon upconversion. Here we study this problem using CsPbBr₃ and CdSe nanocrystals as triplet donors and carboxylated anthracene isomers as acceptors. We find that the position of the carboxyl anchoring group on the molecule dictates the donor‐acceptor coupling to be either through‐bond or through‐space, while the relative strength of the two coupling pathways is controlled by the wavefunction leakage of nanocrystals that can be quantitatively tuned by nanocrystal sizes or shell thicknesses. By simultaneously engineering molecular geometry and nanocrystal wavefunction, energy transfer and photon upconversion efficiencies of a nanocrystal/molecule system can be improved by orders of magnitude.     

Reactions of fused dihydro-1,2,4-thiadiazoles with isoselenocyanates giving 6aλ4-thia-1,3,4,6-tetraazapentalene derivatives and 5,10-dihydro-1,2,4-thiaselenazolo[4,5-b][2,4]benzodiazepines

3-Methyl-6,7-dihydro-5H-1,2,4-thiadiazolo[4,5-a]pyrimidine (1) reacted with isoselenocyanates with elimination of acetonitrile and concomitant addition of two molecules of the isoselenocyanate to give 2,3-di-substituted-6,7-dihydro-5H-2aλ⁴-thia-2,3,4a,7a-tetraazacyclopent[cd]indene-1(2H),4(3H)-diselones (6a)–(6j). 3-Methyl-5,10-dihydrobenzo[e]-1,2,4-thiadiazolo[4,5-a][1,3]diazepine (3) likewise reacted with alkyl isoselenocyanates to give the 2,3-dialkyl-5-10-dihydro-2aλ⁴-thia-2,3,4a,10a-tetraazapentaleno[3,3a,4-gh]benzocycloheptene-1,4-diselones (9a)–(9h), but reaction of (3) with aryl isoselenocyanates took place with elimination of acetonitrile and incorporation of one molecule of the aryl isoselenocyanate in the product to give 3-arylimino-5,10-dihydro-1,2,4-thiaselenazolo[4,5-b][2,4]benzodiazepines (10a)–(10h). Structure (10) is a new heterocyclic system. The pyrimidine (1) and the diazepine (3) reacted with aryl isoselenocyanates at room temperature in solvents of low polarity to give zwitterion 1:1 addition compounds (7) and (12), respectively. NMR studies reveal that the thiaselenazoles (10) react in solution with aryl isoselenocyanates to give diaryl diselones (11) in a reversible process involving a Dimroth rearrangement. © 1996 John Wiley & Sons, Inc.     

Ketene acetal monomers: Synthesis and characterization

A new, facile, and high-yield synthesis of ketene acetals derived from readily available and inexpensive starting materials has been developed. For example, an α,β-unsaturated aldehyde can be condensed with an alkane diol to afford a 2-vinyl substituted cyclic acetal. This latter compound can be converted to the desired cyclic ketene acetal by isomerization of the double bond in the presence of tris(triphenylphosphine)ruthenium(II) dichloride. Good to excellent yields of cyclic ketene acetals were obtained employing this method. The novel monomers were fully characterized by IR, NMR, and by elemental analysis. © 1996 John Wiley & Sons, Inc.     

A Simple Route to Produce Highly Efficient Porous Carbons Recycled from Tea Waste for High-Performance Symmetric Supercapacitor Electrodes

High-performance porous carbons derived from tea waste were prepared by hydrothermal treatment, combined together with KOH activation. The heat-treatment-processed materials possess an abundant hierarchical structure, with a large specific surface of 2235 m² g⁻¹ and wetting-complemental hydrophilicity for electrolytes. In a two-electrode system, the porous carbon electrodes’ built-in supercapacitor exhibited a high specific capacitance of 256 F g⁻¹ at 0.05 A g⁻¹, an excellent capacitance retention of 95.4% after 10,000 cycles, and a low leakage current of 0.014 mA. In our work, the collective results present that the precursor crafted from the tea waste can be a promising strategy to prepare valuable electrodes for high-performance supercapacitors, which offers a practical strategy to recycle biowastes into manufactured materials in energy storage applications.     

Aerial Video Trackers Review

Target tracking technology that is based on aerial videos is widely used in many fields; however, this technology has challenges, such as image jitter, target blur, high data dimensionality, and large changes in the target scale. In this paper, the research status of aerial video tracking and the characteristics, background complexity and tracking diversity of aerial video targets are summarized. Based on the findings, the key technologies that are related to tracking are elaborated according to the target type, number of targets and applicable scene system. The tracking algorithms are classified according to the type of target, and the target tracking algorithms that are based on deep learning are classified according to the network structure. Commonly used aerial photography datasets are described, and the accuracies of commonly used target tracking methods are evaluated in an aerial photography dataset, namely, UAV123, and a long-video dataset, namely, UAV20L. Potential problems are discussed, and possible future research directions and corresponding development trends in this field are analyzed and summarized.     

An improved evaluation of the neutron background in the PandaX-Ⅱ experiment

In dark matter direct detection experiments,neutron is a serious source of background,which can mimic the dark matter-nucleus scattering signals.In this paper,we present an improved evaluation of the neutron background in the PandaX-II dark matter experiment by a novel approach.Instead of fully relying on the Monte Carlo simulation,the overall neutron background is determined from the neutron-induced high energy signals in the data.In addition,the probability of producing a dark-matter-like background per neutron is evaluated with a complete Monte Carlo generator,where the correlated emission of neutron(s)andγ(s)in the(α,n)reactions and spontaneous fissions is taken into consideration.With this method,the neutron backgrounds in the Run 9(26-ton-day)and Run 10(28-ton-day)data sets of PandaX-II are estimated to be(0.66±0.24)and(0.47±0.25)events,respectively.     

Preparation of coatings from a series of silicone/fluorine‐functionalized polyacrylates via electrophoretic deposition

Silicone/fluorine‐functionalized polyacrylates were synthesized and subsequently used to prepare corrosion‐resistant transparent coatings via electrophoretic deposition. The coated tin plate with the functionalized polyacrylate had a gloss value higher than 95.0 GU and resisted rust after immersion in a 5 wt% NaCl solution for 10 days. In addition, these coatings remained adhered strongly to the tin plates even after they were bent. It is hoped that this work will provide useful experimental data and assist researchers with the design of applicable coatings with desirable properties. Copyright © 2015 John Wiley & Sons, Ltd.