Limit cycles of polynomial differential systems with homogeneous nonlinearities of degree 4 via the averaging method

By using the averaging method, we study the limit cycles for a class of quartic polynomial differential systems as well as their global shape in the plane. More specifically, we analyze the global shape of limit cycles bifurcating from a Hopf bifurcation and also from periodic orbits with linear center , . The perturbation of these systems is made inside the class of quartic polynomial differential systems without quadratic and cubic terms.     

Preparation of flower-like molybdenum disulfide for solid-phase extraction of N-nitrosoamines in environmental water samples

In this paper, a flower-like molybdenum disulfide material was prepared by hydrothermal method and was first used as adsorbents in the solid-phase extraction process for enriching N-nitrosoamines. Molybdenum disulfide exhibited three-dimensional petal-like microspheres with about 500 nm in diameter. The relevant analyte extraction and elution parameters (sample volumes, solution pH, washing solvents, elution solvents, and elution volumes) were optimized to improve the solid-phase extraction efficiency. The solid-phase extraction process coupled with high-performance liquid chromatography-tandem mass spectrometry for determining N-nitrosoamines in environmental water samples was established. The limits of detection were in the range of 0.01–0.05 ng/mL. The satisfactory recoveries (68.9–106.1%) were obtained at three different spiked concentrations (2, 5, and 8 ng/mL) in water samples, and the relative standard deviations were between 1.96 and 8.38%. This proposed method not only showed high sensitivity and good reusability but also provided a new adsorbent for enriching trace N-nitrosoamines in environmental water samples.     

Identification of an IGF2BP2-Targeted Peptide for Near-Infrared Imaging of Esophageal Squamous Cell Carcinoma

Esophageal squamous cell carcinoma (ESCC) is one of the most lethal malignancies globally. Peptide-based tumor-targeted imaging is critical for ESCC imaging. In this study, we aim to identify a peptide-targeting IGF2BP2 that specifically binds to human ESCC for near-infrared imaging of esophageal cancer. Applying phage display techniques, we identified a peptide target for IGF2BP2 which was confirmed to be highly expressed in ESCC cell lines or tumor tissue and may serve as an imaging target for ESCC. We conjugated the peptide to the NIRF group, Cy5, and further evaluated the targeting efficacy of the probe at a cellular level and in animal tumor models. The Cy5 conjugated peptide (P12-Cy5) showed a high binding affinity to human ESCC cells in vitro. In vivo, optical imaging also validated the tumor-targeting ability of P12-Cy5 in KYSE-30-bearing subcutaneous ESCC tumor models. Furthermore, the results of biodistribution showed a significantly higher fluorescence intensity in tumors compared to scrambled peptide, which is consistent with in vivo observations. In summary, an IGF2BP2-targeted peptide was successfully identified. In vitro and in vivo experiments confirmed that P12-Cy5 has high affinity, specificity and tumor-targeting properties. Thus, P12-Cy5 is a prospective NIR probe for the imaging of ESCC.     

Understanding Synergistic Catalysis on Cu-Se Dual Atom Sites via Operando X-ray Absorption Spectroscopy in Oxygen Reduction Reaction

The construction and understanding of synergy in well-defined dual-atom active sites is an available avenue to promote multistep tandem catalytic reactions. Herein, we construct a dual-hetero-atom catalyst that comprises adjacent Cu-N₄ and Se-C₃ active sites for efficient oxygen reduction reaction (ORR) activity. Operando X-ray absorption spectroscopy coupled with theoretical calculations provide in-depth insights into this dual-atom synergy mechanism for ORR under realistic device operation conditions. The heteroatom Se modulator can efficiently polarize the charge distribution around symmetrical Cu-N₄ moieties, and serve as synergistic site to facilitate the second oxygen reduction step simultaneously, in which the key OOH*-(Cu₁-N₄) transforms to O*-(Se₁-C₂) intermediate on the dual-atom sites. Therefore, this designed catalyst achieves satisfied alkaline ORR activity with a half-wave potential of 0.905 V vs. RHE and a maximum power density of 206.5 mW cm⁻² in Zn-air battery.     

New enantiomeric polylactide-block-poly(butylene succinate)-block-polylactides: syntheses, characterization and in situ self-assembly

In situ self-assemblies of new biodegradable triblock PLLA-b-PBS-b-PLLA and PDLA-b-PBS-b-PDLA have been investigated in acetonitrile solution. At first, two series of PLLA-b-PBS-b-PLLA and PDLA-b-PBS-b-PDLA, respectively denoted as the P and Q triblock copolyester series, were prepared with fixed PBS block ((overline) M(n,NMR) = 6.9 kDa) and diverse enantiomeric PLLA/PDLA blocks. Further, their chemical structures and thermal properties were characterized by means of titration, nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC), polarimeter, wide-angle X-ray diffraction (WAXD) and thermal analytical instruments. When mixing the synthesized enantiomeric copolyester pairs denoted as P(1)/Q(1) - P(8)/Q(8) in acetonitrile solution at 60 degrees C, in situ self-assemblies were found to happen for the P(4)/Q(4) to P(8)/Q(8) pairs, bearing longer enantiomeric PLA block lengths. DSC and WAXD analysis of the self-assembled microparticles demonstrated that PLLA/PDLA racemic crystals were formed for the P(5)/Q(5) - P(8)/Q(8) systems, as evidenced by their melting points over 200 degrees C, and a new X-ray diffraction peak detected at 2theta = 11.8 degrees . Moreover, morphological studies by scanning electron microscopy (SEM) indicated the formation of disk- or platelet-like microparticles. It was noted that the diameters of the microparticles self-assembled in situ decreased from 1.28-1.50 mum down to 480-660 nm, through tailoring the enantiomeric PLA block length. Other factors, such as a central PBS block, the enantiomeric block length and the preparation conditions were suggested to play important roles in the in situ self-assembly of these enantiomeric triblock copolyesters. These results provide a facile way to self-assemble hydrophobic, biodegradable microparticles, through tuning the important van der Waals stereocomplexation interactions between two enantiomeric blocks in solution.     

氮化硼纳米片在重防腐涂层中的应用进展

氮化硼纳米片也被称为"白色石墨烯",是一种重要的纳米填料,具有优异的机械性、导热性、耐磨性、阻隔性、疏水性,同时也是一种新兴的性能优良的绝缘材料.被广泛应用于重防腐涂层、润滑剂、传感器等领域.基于氮化硼纳米片在金属腐蚀防护领域巨大的应用前景,本综述将从氮化硼纳米片的制备及表面官能化、氮化硼薄膜防护涂层、氮化硼纳米片/有机防护涂层、氮化硼纳米片-无机复合材料/有机防护涂层这四部分进行系统总结,重点围绕氮化硼纳米片在有机涂层中均匀分散能力以及金属腐蚀防护能力等方面等进行详细分析和介绍,同时对氮化硼纳米片基防腐涂料未来发展进行了展望.     

Numerical simulation of Mach reflections

In this paper, the “FLIC” difference method with triangular mesh is adopted to numerically simulate the regular and Mach reflections that occur when a shock wave pass around a wedge. The compuational result is compared with the shock tube experimental results of G. Ben-Dor and I. I. Glass. The comparison shows that the position, shape of shock wave and height of Mach stem all show a good agreement. Consequently, the “FLIC” difference method with triangular mesh is quite satisfactory in numerical simulation of the regular and Mach reflections.     

The tribology properties of alumina/silica composite nanoparticles as lubricant additives

The as-prepared alumina/silica (Al₂O₃/SiO₂) composite nanoparticles were synthesized with a hydrothermal method and modified by silane coupling agent. The tribological properties of the modified Al₂O₃/SiO₂ composite nanoparticles as lubricating oil additives were investigated by four-ball and thrust-ring tests in terms of wear scar diameter, friction coefficient, and the morphology of thrust-ring. It is found that their anti-wear and anti-friction performances are better than those of pure Al₂O₃ or SiO₂ nanoparticles. When the optimized concentration of nanoparticle additive is 0.5 wt.%, the diameters of wear scar and friction coefficients are both smallest. Such modified composite nanoparticles can adsorb onto the friction surfaces, which results in rolling friction. Therefore, the friction coefficient is reduced.     

Optical properties of InGaAsBi/GaAs strained quantum wells studied by temperature-dependent photoluminescence

The effect of bismuth on the optical properties of InGaAsBi/GaAs quantum well structures is investigated using the temperature-dependent photoluminescence from 12 K to 450 K.The incorporation of bismuth in the InGaAsBi quantum well is confirmed and found to result in a red shift of photoluminescence wavelength of 27.3 meV at 300 K.The photoluminescence intensity is significantly enhanced by about 50 times at 12 K with respect to that of the InGaAs quantum well due to the surfactant effect of bismuth.The temperature-dependent integrated photoluminescence intensities of the two samples reveal different behaviors related to various non-radiative recombination processes.The incorporation of bismuth also induces alloy non-uniformity in the quantum well,leading to an increased photoluminescence linewidth.     

中子诱发12C反应的理论计算与分析

利用统一的Hauser–Feshbach理论和角动量相关的激子模型,以中子诱发¹²C反应为例,研究了轻核反应的反应机制和轻核反应的特点,并进行了理论计算,同时与实验数据进行了比较.