A simple and efficient copper oxide-catalyzed Barbier–Grignard reaction of unactivated aryl or alkyl bromides with ester

An efficient one-pot route to synthesize tertiary alcohol compounds using Barbier–Grignard reaction of unactivated alkyl or aryl bromides with ester in THF at 65 °C catalyzed by CuO has been developed and systematically investigated. A wide range of substituted tertiary alcohol compounds were obtained in good to high yields. The reaction is highly chemoselective. The mechanism involving the leaving group of R²O^-group is discussed.     

一种卡宾配合物的合成及其在Suzuki反应中的应用

合成了一种N-杂环卡宾的钯配合物,可用于高效地催化芳基溴化物和对甲苯磺酸芳酯对芳基硼酸的Suzuki偶联反应.该反应在二氧六环溶剂中以醋酸钾为助剂、空气氛下80℃即可进行,具有收率高、催化剂容易制备等优点.     

高温氟化盐对熔盐堆用材料的腐蚀行为研究进展

氟化物熔盐在熔盐堆(MSR)中可用作为核燃料载体和冷却剂,其独特热物理化学性质能极大提高MSR的传热效率。但MSR高温和强腐蚀条件对材料的选择使用要求非常苛刻,特别是氟化物熔盐在高温下对结构材料的腐蚀直接关系到MSR的安全运行和使用寿命,成为制约MSR应用发展的关键。本文综述了LiF-NaF-KF(Flinak)和LiF-BeF2(Flibe)熔盐与金属合金材料、碳材料及陶瓷材料腐蚀行为方面的研究进展,对材料在不同条件下腐蚀行为的机理进行了分析。研究发现,应用于MSR的高镍基合金及石墨材料存在着高温腐蚀性及机械性能差等弱点。未来新型高镍基合金、C/C复合材料及新型陶瓷材料(SiC及其复合材料、其他陶瓷材料)有望在氟化物熔盐体系中获得应用,并最终解决MSR用材料的困惑,实现MSR快速工业化发展。     

中孔分子筛Al/SO42-/Al-MCM-41的合成、表征及催化性能

分别用H2SO4和Al2(SO4)3对中孔分子筛Al-MCM-41进行改性,得到了中孔分子筛SO42-/Al-MCM-41和Al/SO24-/Al-MCM-41。采用X射线多晶衍射(XRD)、红外光谱(FT-IR)、N2吸附-脱附和NH3程序升温脱附(NH3-TPD)等测试技术对样品的结构和表面酸性进行了表征。分别用Al-MCM-41、SO24-/Al-MCM-41和Al/SO24-/Al-MCM-41催化合成丙酸香叶酯,比较了三者的催化性能。结果表明,用Al2(SO4)3改性中孔分子筛Al-MCM-41,能得到仍保持着六方介孔结构的中孔分子筛Al/SO24-/Al-MCM-41,其酸性和催化性能比用H2SO4改性得到的SO24-/Al-MCM-41更强;用Al2(SO4)3改性不仅SO24-附着在了分子筛骨架上,而且Al也接枝在了分子筛骨架上。     

新型多孔氮化硼材料

多孔氮化硼材料是一种新型多孔非氧化物材料,具有高比表面积、可调孔径、良好的化学惰性和热稳定性等特点,在催化、储氢、气体吸附和分离等领域具有巨大的应用潜力,是材料领域研究热点之一。依孔径的不同,多孔氮化硼材料被分为微孔氮化硼、介孔氮化硼、大孔氮化硼和多级孔氮化硼。本文综述了微孔、介孔、大孔及多级孔等类型氮化硼材料的研究进展。重点介绍了不同类型氮化硼材料的制备和性能,并分析了各种制备方法的优缺点,最后探讨了多孔氮化硼材料的发展前景。     

锂离子电池负极材料Li4Ti5O12的半固相法制备及碳包覆改性

由半固相法制得锂离子电池负极材料Li4Ti5O12,并研究了Li4Ti5O12的碳包覆改性.采用XRD、SEM、TEM以及HRTEM观察和分析产物的相结构与形貌.采用恒流充放电、循环伏安法和交流阻抗技术测试了材料的电化学性质.结果表明,Li4Ti5O12因颗粒团聚电化学性能严重下降,该电极在0.1C和0.5C首周期放电容量分别为121.7和87.6 mAh·g-1;碳包覆Li4Ti5O12/C材料呈球形分布,能抑制颗粒团聚,该电极倍率<0.5C时的放电比容量大于180 mAh·g-1,超过Li4Ti5O12的理论放电比容量(175 mAh·g-1);在1C、5C和10C倍率下,其容量仍保持在136、79.9和58.3 mAh·g-1,碳包覆改性材料具有优异的循环寿命和高倍率性能.     

Systhesis of double-hydrophilic core-shell type multiarm star copolymer polyethylenimine-block-poly(2-hydroxyethyl methacrylate

Multiarm star block copolymers hyperbranched polyethylenimine-b-poly(2-hydroxyethyl methacrylate) (HPEI-b-PHEMA) with average 28 PHEMA arms have been prepared by atom transfer radical polymerization (ATRP) of HEMA in a mixed solvent of methanol and water using a core-first strategy. The hyperbranched macroinitiator employed was prepared on the basis of well-defined hyperbranched polyethylenimine with Mw/Mn of 1.04 by amidation with 2-bromo-isobutyryl bromide. The polymerization condition was optimized to prepare star copolymers with narrow dispersity, and the variables included the volume ratio of methanol to water, the molar ratio of initiating site to CuCl and the molar ratio of [CuCl]:[CuBr2]. Under the optimized polymerization condition, the lowest Mw/Mn value of the obtained star copolymers was around 1.3. Kinetic analysis showed that an induction period existed in the polymerization of HEMA. After this induction period, a linear dependence of ln([M]0/[M]t) on time was observed. The obtained HPEI-b-PHEMA could adsorb hydrophilic molecules. The comparison with the star copolymer with hydrophobic core and hydrophilic PHEMA shell verified that both the hydrophilic core and shell could host the hydrophilic guests, but the amidated HPEI core was more effective than the PHEMA shell.     

重金属的生物吸附机理及吸附平衡模式研究*

各种生物吸附剂包括海洋微生物、发酵工业的菌丝体废渣及活性污泥的提取物等对金属离子的吸附特性已被广泛研究,本文就生物体对金属离子的吸附机理及吸附平衡模式研究进行了综述,阐明了今后的研究方向。     

TiO2光催化氧化研究进展

探讨了TiO2光催化氧化技术的原理,其研究现状,以及可能提高TiO2光催化氧化效率的途径。采用参考文献18篇。