Color-stable,reduced efficiency roll-off hybrid white organic light emitting diodes with ultra high brightness

High-brightness and color-stable two-wavelength hybrid white organic light emitting diodes (HWOLEDs) with the configuration of indium tin oxide (ITO)/ N, N, N, N-tetrakis(4-methoxyphenyl)-benzidine (MeO-TPD): tetrafluoro-tetracyanoqino dimethane (F4-TCNQ)/N,N-di(naphthalene-1-yl)-N,N-diphenyl-benzidine (NPB)/ 4,4-N,N-dicarbazolebiphenyl (CBP): iridium (III) diazine complexes (MPPZ) 2 Ir(acac)/NPB/2-methyl-9,10-di(2-naphthyl)anthracene (MADN): p-bis(p-N,N-di-phenyl-aminostyryl)benzene (DSA-ph)/bis(10-hydroxybenzo[h] quino-linato)beryllium complex (Bebq2)/LiF/Al have been fabricated and characterized. The optimal brightness of the device is 69932 cd/m2 at a voltage of 13 V, and the Commission Internationale de l'Eclairage (CIE) chromaticity coordinates are almost constant during a large voltage change of 6-12 V. Furthermore, a current efficiency of 15.3 cd/A at an illumination-relevant brightness of 1000 cd/m2 is obtained, which rolls off slightly to 13.0 cd/A at an ultra high brightness of 50000 cd/m2. We attribute this great performance to wisely selecting an appropriate spacer together with effectively utilizing the combinations of exciton-harvested orange-phosphorescence/blue-fluorescence in the device. Undoubtedly, this is one of the most exciting results in two-wavelength HWOLEDs up to now.     

Study on anti-emission materials for non-emitting grid applications in microwave power tubes

Hafnium and platinum were deposited onto molybdenum grids by ion-beam assisted deposition method. Electron-emission characteristics from molybdenum grids with Hf and Pt films, which were contaminated by active electron-emission substances (Ba, BaO) of the cathode, were measured using analogous diode method. The surfaces of grids were analyzed by X-ray diffraction. The results revealed that the reaction between BaO and Hf formed BaHfO₃ compound, which greatly reduced the accumulation of BaO on the surface and accordingly decreased grid emission. In contrast, Ba were formed by the decomposition of BaO on the surface of Pt film under high temperature and re-evaporated from its surface, which reduced the active electron-emission substances on the surface of the grid and effectively restrained grid emission. Their mechanisms for grid-emission suppression are discussed and a good method to develop new grid-coating materials is suggested.     

Micromagnetic analysis of transition noise for high-density perpendicular recording

In this paper, specific issues related to high-density perpendicular magnetic recording processes, such as transition noise properties and cross-track correlation lengths, were investigated with the help of micromagnetic analysis. The effects of media parameters were taken into consideration, including intergranular exchange coupling, and exchange distribution, irregular grain shapes, magnetization saturation distribution, and anisotropy distribution. The micromagnetic simulation results showed that the effect of anisotropy distribution on transition noise is more significant than magnetization saturation distribution, and it is crucial to reduce this effect to achieve a high signal-to-noise ratio. Additionally, a new method to further estimate the partial erasure threshold was proposed to approximate the partial erasure effects, and the relation between the microtrack jitter and total track jitter was investigated.     

Preparation, characterization and photocatalytic activity of polycrystalline Bi2O3/SrTiO3 composite powders

Bi₂O₃/SrTiO₃ composite powders have been prepared and their photocatalytic activities were investigated by photooxidation of methanol. These powders were characterized by UV-Visible diffuse reflectance spectra, SEM and X-ray diffraction (XRD). The results revealed that all the Bi₂O₃/SrTiO₃ composite powders exhibited higher photocatalytic activity than pure SrTiO₃, Bi₂O₃ and TiO₂ (P25) under visible light irradiation (λ>440 nm). The effects of the Bi₂O₃ contents on the photocatalytic activities of the composite powders were examined, the photocatalytic activities increased with the content of Bi₂O₃ increasing to a maximum of 83% and then decreased under visible light irradiation. The effects of the calcination temperatures on the photocatalytic activities of the composite powders were also investigated.     

纯Cr2O3包覆Li4Ti5O12微球的制备及其储锂性能研究

The pure Cr₂O₃ coated Li₄Ti₅O₁₂ microspheres were prepared by a facile and cheap solutionbased method with basic chromium(III) nitrate solution (pH=11.9). And their Li-storage properties were investigated as anode materials for lithium rechargeable batteries. The pure Cr₂O₃ works as an adhesive interface to strengthen the connections between Li₄Ti₅O₁₂ particles, providing more electric conduction channels, and reduce the inter-particle resistance. Moreover, LixCr₂O₃, formed by the lithiation of Cr₂O₃, can further stabilize Li₇Ti₅O₁₂ with high electric conductivity on the surface of particles. While in the acid chromium solution (pH=3.2) modification, besides Cr₂O₃, Li₂CrO₄ and TiO₂ phases were also found in the final product. Li₂CrO₄ is toxic and the presence of TiO₂ is not welcome to improve the electrochemical performance of Li₄Ti₅O₁₂ microspheres. The reversible capacity of 1% Cr₂O₃-coated sample with the basic chromium solution modification was 180 mAh/g at 0.1 C, and 134 mAh/g at 10 C. Moreover, it was even as high as 127 mAh/g at 5 C after 600 cycles. At-20℃, its reversible specific capacity was still as high as 118 mAh/g.     

基于VxWorks新型映像的三模冗余启动机制研究

针对VxWorks启动映像依赖于ROM地址,不能适应航天型号中三模存储要求的缺点,利用VxWorks自带的压缩算法,按照航天型号软件任务要求设计了一种基于VxWorks内存型映像的新型压缩映像,实现了软件映像与ROM区地址无关。并且实现了新型压缩映像的三模冗余引导启动,启动时每一个bit数据都从三份映像获取,并进行三取二判断,将最后结果拷贝到内存作为目的映像的bit数据,目的映像启动后能够回写正确数据自动纠正空间环境下可能发生的单粒子翻转错误,为软件的可靠启动建立了基础。     

紫外光电材料ZnO的反应溅射制备及研究

采用直流反应溅射法分别在Si(111),Si(001),及K4玻璃衬底上制备ZnO薄膜,研究了氧氩比、衬底温度以及退火处理对于晶体结晶质量的影响,发现生长过程中的退火处理提高了薄膜质量和晶面取向.通过优化生长条件,在衬底温度为350℃,氧氩比为1:2的条件下生长出了XRD半高宽为01°、C轴取向高度一致的ZnO薄膜.     

塑料脱模剂一组分的光谱分析

柱层析色谱分离性能优良的新型塑料脱模剂，纯化后得一主要未知组分。用元素分析、红外光谱、核磁共振氢谱研究其结构特征，对其盐酸酸化前后红外光谱吸收峰及核磁带进行了归属分析并确定结构。结果表明，该组分为一表面活性剂N，N-二羟乙基十二烷基胺。这为新型脱模剂的产品开发提供了依据。     

磁绝缘传输线电压的初步测量

针对快脉冲直线变压器驱动源装置上的真空磁绝缘传输线（MITL)电压测量的需求,开展了微分型电容分压器和电感分压器的设计、标定和实验。通过不同的电压值、负载阻抗的装置实验中探头输出结果的分析和比较,讨论了测量方法的可行性和适用范围。实验结果表明：微分型电容分压器能够应用于完全磁绝缘状态下的MITL电压测量,但容易受阴极电子发射的影响导致探头输出波形发生畸变。电感分压器受分布电容和电感的影响导致输出信号存在寄生振荡,采用波形重建的方法初步获得了合理的测量结果。