氮化铂在高压下的相变及弹性性质的第一原理计算

用PBE形式下的广义梯度近似（GGA）赝势平面波方法研究了氮化铂的结构相变以及弹性性质,计算了氮化铂的氯化钠（B1）、氯化铯（B2）、闪锌矿（B3）、纤维矿（B4）等四种结构并应用高压下的焓与压强的关系,得出在常温常压下B4结构是最稳定的结构,这与Yu 等人得的结果一致,且 B4→B1及B1→B2的相变压强分别发生在36.7 GPa和 185.4 GPa,同时,研究了B4结构在高压的弹性性质,发现弹性常数、体模量、剪切模量、压缩波速、剪切波速以及德拜温度均随着压强的增大而单调增大     

Lithiation of a Silyl Ether: Formation of an ortho‐Fries Hydroxyketone

A hydroxy‐directed alkylation of an N,N‐diethylarylamide using CIPE‐assisted α‐silyl carbanions (CIPE=complex‐induced proximity effect) has been developed using a simple reagent combination of LDA (lithium diisopropylamide) and chlorosilane. A study of the mechanism, and the application of the procedure to an anionic Snieckus–Fries rearrangement for a highly efficient synthesis of the potent phosphatidylinositol 3‐kinase (PI3K) inhibitor LY294002, are reported.     

两个由2,3,5-吡啶三酸构筑的三维网状配位聚合物的合成、晶体结构和性质研究

2,3,5-吡啶三酸在水热条件下分别与Mn(CH3COO)2·4H2O和Co(CH3COO)2·4H2O反应,得到了2种金属有机骨架(MOFs)配合物[Mn1.5(2,3,5-pta)(H2O)4]n(1)和[Co1.5(2,3,5-pta)(H2O)4]n(2),其中2,3,5-H3pta=2,3,5-吡啶三酸。利用元素分析、红外、热重和X-射线单晶衍射分析进行了表征。分析结果表明2个配合物属于同构晶体:晶系为单斜,空间群为P21/c,其中,吡啶三酸配体完全脱去3个质子,并分别与4个六配位的金属离子相连,在空间形成一种三维网络状结构。热重分析表明,配合物1的稳定性要高于配合物2。     

Dinitrosyl Iron Complex [K-18-crown-6-ether][(NO)2Fe(MePyrCO2)]: Intermediate for Capture and Reduction of Carbon Dioxide

Continued efforts are made for the utilization of CO₂ as a C₁ feedstock for regeneration of valuable chemicals and fuels. Mechanistic study of molecular (electro-/photo-)catalysts disclosed that initial step for CO₂ activation involves either nucleophilic insertion or direct reduction of CO₂. In this study, nucleophilic activation of CO₂ by complex [(NO)₂Fe(μ-^MePyr)₂Fe(NO)₂]²⁻ ( 2 , ^MePyr=3-methylpyrazolate) results in the formation of CO₂-captured complex [(NO)₂Fe(^MePyrCO₂)]⁻ ( 2-CO₂ , ^MePyrCO₂=3-methyl-pyrazole-1-carboxylate). Single-crystal structure, spectroscopic, reactivity, and computational study unravels 2-CO₂ as a unique intermediate for reductive transformation of CO₂ promoted by Ca²⁺. Moreover, sequential reaction of 2 with CO₂, Ca(OTf)₂, and KC₈ established a synthetic cycle, 2 → 2-CO₂ → [(NO)₂Fe(μ-^MePyr)₂Fe(NO)₂] ( 1 ) → 2 , for selective conversion of CO₂ into oxalate. Presumably, characterization of the unprecedented intermediate 2-CO₂ may open an avenue for systematic evaluation of the effects of alternative Lewis acids on reduction of CO₂.     

Bucillamine Inhibits UVB-Induced MAPK Activation and Apoptosis in Human HaCaT Keratinocytes and SKH-1 Hairless Mouse Skin

Ultraviolet B (UVB) radiation is known as a culprit in skin carcinogenesis. We have previously reported that bucillamine (N-[2-mercapto-2-methylpropionyl]-L-cysteine), a cysteine derivative with antioxidant and anti-inflammatory capacity, protects against UVB-induced p53 activation and inflammatory responses in mouse skin. Since MAPK signaling pathways regulate p53 expression and activation, here we determined bucillamine effect on UVB-mediated MAPK activation in vitro using human skin keratinocyte cell line HaCaT and in vivo using SKH-1 hairless mouse skin. A single low dose of UVB (30 mJ cm⁻²) resulted in increased JNK/MAPK phosphorylation and caspase-3 cleavage in HaCaT cells. However, JNK activation and casaspe-3 cleavage were inhibited by pretreatment of HaCaT cells with physiological doses of bucillamine (25 and 100 µm ). Consistent with these results, bucillamine pretreatment in mice (20 mg kg⁻¹) inhibited JNK/MAPK and ERK/MAPK activation in skin epidermal cells at 6–12 and 24 h, respectively, after UVB exposure. Moreover, bucillamine attenuated UVB-induced Ki-67-positive cells and cleaved caspase-3-positive cells in mouse skin. These findings demonstrate that bucillamine inhibits UVB-induced MAPK signaling, cell proliferation and apoptosis. Together with our previous report, we provide evidence that bucillamine has a photoprotective effect against UV exposure.     

Module-Designed Carbon-Coated Separators for High-Loading,High-Sulfur-Utilization Cathodes in Lithium–Sulfur Batteries

Lithium–sulfur batteries have great potential as next-generation energy-storage devices because of their high theoretical charge-storage capacity and the low cost of the sulfur cathode. To accelerate the development of lithium–sulfur technology, it is necessary to address the intrinsic material and extrinsic technological challenges brought about by the insulating active solid-state materials and the soluble active liquid-state materials. Herein, we report a systematic investigation of module-designed carbon-coated separators, where the carbon coating layer on the polypropylene membrane decreases the irreversible loss of dissolved polysulfides and increases the reaction kinetics of the high-loading sulfur cathode. Eight different conductive carbon coatings were considered to investigate how the materials’ characteristics contribute to the lithium–sulfur cell’s cathode performance. The cell with a nonporous-carbon-coated separator delivered an optimized peak capacity of 1112 mA∙h g⁻¹ at a cycling rate of C/10 and retained a high reversible capacity of 710 mA∙h g⁻¹ after 200 cycles under lean-electrolyte conditions. Moreover, we demonstrate the practical high specific capacity of the cathode and its commercial potential, achieving high sulfur loading and content of 4.0 mg cm⁻² and 70 wt%, respectively, and attaining high areal and gravimetric capacities of 4.45 mA∙h cm⁻² and 778 mA∙h g⁻¹, respectively.     

Carbon Encapsulation of High Entropy Alloy Nanoparticles with Extraordinary Coercivity and Saturation at Room Temperature

Owing to their unique properties and technological potential, high entropy alloys (HEAs) have become the subject of great interest in the materials science community. HEAs consist of more than four principle elements in equimolar ratio so their configurational entropy is intrinsically greater than one-principle element based. The increasing surface energy and chemical tendency toward clustering of like atoms at low dimension, however, make production of HEA-nanoparticles (HEA-NPs) extremely difficult. A facile production of HEA-NPs inside carbon nanotubes and nanoparticles is demonstrated in this work. Electron microscopic and elemental analyses confirm encapsulated to be solution phase; some embrace carbides and form multidomains with chemical composition ranging from quaternary to quinary phase. Multidomains and nonmagnetic centers create hardening thus promoting coercivity significantly at room temperature. Alloying induces electron redistribution into high spin states, accounting for observed high saturation. Configurational entropy of encapsulated HEA-NPs lies on a range comparable with bulk.     

纳米Bi2Sn2O7的微乳液法制备与表征

纳米Bi2Sn2O7的微乳液法制备与表征;纳米;Bi2Sn2O7;微乳液法     

VmTi和KnV0.04Ti担载氧化物催化剂的表征与催化燃烧柴油炭黑的性能

用FTIR和UV-Vis研究了2个系列不同V和K负载量的VOx/TiO2和K-VOx/TiO2催化剂结构的变化;并使用程序升温氧化反应技术对这两种催化剂催化柴油炭黑燃烧活性进行了考察.结果表明,当VOx/TiO2催化剂中n(V)∶n(Ti)=0.04时,催化剂活性最好(tm=389℃).添加K能显著改善VOx/TiO2催化剂活性,n(K)∶n(V)∶n(Ti)=0.04∶0.04∶1时,炭黑燃烧的反应温度最低(tm=343℃).FTIR和UV-Vis结果表明,当VOx/TiO2催化剂n(V)∶n(Ti)>0.04∶1时,催化剂表面有V2O5形成,由于V2O5氧化能力较弱,因而催化剂的活性反而降低.而当K-VOx/TiO2催化剂中n(K)∶n(V)达到1∶1时,由于形成的KVO3物种与TiO2载体有很好的协同作用,所以催化剂活性最好.     

C4/C5烃催化裂解制低碳烯烃的研究进展

从催化剂类型、裂解工艺、催化裂解的影响因素和裂解机理4个方面对国内外C4/C5烃催化裂解制低碳烯烃的研究进行了综述。催化裂解制低碳烯烃催化剂主要采用ZSM-5分子筛系列催化剂,在此基础上发展了酸改性或水热改性高硅ZSM系列分子筛及介孔MCM-41分子筛。总结了国内外C4/C5烃的裂解工艺,认为影响催化裂解的主要因素是裂解原料、催化剂类型及工艺条件。目前,裂解机理主要是自由基与碳正离子机理相结合的机理。并简述了本课题组目前有关C4烷烃催化裂解的主要研究进展。