Structural phase transition,antiferromagnetism and two superconducting domes in LaFeAsO_(1-x)F_x(0<x≤0.75)

We report~(75) As nuclear magnetic resonance(NMR)/nuclear quadrupole resonance(NQR) and transmission electron microscopy(TEM) studies on LaFeAsO_(1-x)F_x. There are two superconducting domes in this material. The first one appears at 0.03 ≤ x ≤0.2 with T_c~(max) = 27 K, and the second one at 0.25 ≤x≤0.75 with T_c~(max) = 30 K. By NMR and TEM, we demonstrate that a C4-to-C2 structural phase transition(SPT) takes place above both domes, with the transition temperature T_s varying strongly with x. In the first dome, the SPT is followed by an antiferromagnetic(AF) transition, but neither AF order nor low-energy spin fluctuations are found in the second dome. By ~(75) As nuclear spin-lattice relaxation rate(1/T_1) measurements, we find that AF order and superconductivity coexist microscopically in LaFeAsO_(0.97) F_(0.03). In the coexisting region, 1/T_1 decreases at T_c but becomes proportional to T below 0.6 T_c, indicating gapless excitations. Therefore, in contrast to the early reports, the obtained phase diagram for x ≤ 0.2 is quite similar to the doped BaFe_2As_2 system. The electrical resistivity p in the second dome can be fitted by ρ = ρ0 + AT~n with n = 1 and a maximal coefficient A at around xopt = 0.5-0.55 at which T_s extrapolates to zero and Tc is the maximal, which suggests the importance of quantum critical fluctuations associated with the SPT. We have constructed a complete phase diagram of LaFeAsO_(1-x)F_x, which provides insight into the relationship between SPT, antiferromagnetism and superconductivity.     

SrS∶Eu,Sm光存储机理的研究

采用高温固相反应法在还原气氛下制备了SrS:Eu,Sm样品,利用荧光光谱仪测量了这种光存储材料的激发光谱和发射光谱.将样品用紫外灯(265 nm)照射激发饱和后,再用980 nm的红外激光器激励,利用荧光光谱仪测试得到了峰值位于599 nm的光激励发光光谱.此外还利用热释光谱仪测试了样品的热释光谱.探讨了SrS:Eu,Sm的光存储机理,认为引入的稀土离子在SrS的带隙中形成分裂能级.当用紫外光照射材料时,Eu的电子从基态被激发到激发态或基质材料的导带,其中一部分电子被辅助激活剂Sm的陷阱俘获,实现信息写入.当材料被与陷阱深度相当的红外光激励时,电子陷阱Sm2 俘获的电子才可能跃出俘获能级,与空穴在Eu的激发态和基态能级上复合,多余的能量以可见光的形式释放出来,实现信息读出.     

Propagation dynamics on the Fermi-Pasta-Ulam lattices

The spatiotemporal propagation of a momentum excitation on the finite Fermi-Pasta-Ulam lattices is investigated. The competition between the solitary wave and phonons gives rise to interesting propagation behaviors. For a moderate nonlinearity, the initially excited pulse may propagate coherently along the lattice for a long time in a solitary wave manner accompanied by phonon tails. The lifetime of the long-transient propagation state exhibits a sensitivity to the nonlinear parameter. The solitary wave decays exponentially during the final loss of stability, and the decay rate varying with the nonlinear parameter exhibits two different scaling laws. This decay is found to be related to the largest Lyapunov exponent of the corresponding Hamiltonian system, which manifests a transition from weak to strong chaos. The mean-free-path of the solitary waves is estimated in the strong chaos regime, which may be helpful to understand the origin of anomalous conductivity in the Fermi-Pasta-Ulam lattice.     

电感耦合等离子体-原子发射光谱法测定矿石中钨、钼的不确定度评定

对用ICP-AES测定矿石中钨、钼元素的不确定度进行评估,根据结果计算公式绘制不确定度来源因果分析图,分析主要不确定度来源,包括:样品称量、标准溶液的配制,仪器测量过程重复性等引入的不确定度,评估了钨含量和钼含量的标准不确定度和扩展不确定度.     

Gauge and Bäcklund transformations for the generalized sine-Gordon equation and its η-dependent modified equation

We study the generalized sine-Gordon hierarchy and its associated-dependent modified sine-Gordon hierarchy. Two Bäcklund transformations for these two families are constructed. One of them is a generalization of the Bäcklund transformations of Wadatiet al. and the other one is new. Gauge transformations of a relevant AKNS system are employed to reduce the integration of these equations via the Bäcklund transformations to quadratures. Three generations of explicit solutions of the sine-Gordon equation are presented.     

Using CEMS method to study Sb-doped SnO2 thin film as reducing gas sensing material

¹¹⁹Sn Mossbauer spectra for surface layers of thin film Sb doped SnO were obtained by CEMS method, the emissive internal conversion electrons were detected by multi-wire chamber. In practice the gas-sensing response of these films for H₂, CO depended on Sb concentration of doping (X%) and the annealling processes. It was found that the CEMS parameters of samples-(IS), (QS) and its distribution (HW), reach minima when x=1%, just in agreement with the gas-sensing responsive sensitivity reaching maximum. And then it is helpful for the study of the gas-sensitive mechanism.     

119Sn and121Sb Mössbauer studies of BaSn1−x Sb x O3 Perovskite system

The relations between the electrical characteristics of BaSn_1?x Sb _x O₃ perovskite system and the contents of BaO, Sb₂O₃ and silicate sintering agent were studied by X-ray diffraction analysis and Mössbauer spectroscopy. It was found that the electrical conductivity is related to the substitution of Sb³⁺ for Sn⁴⁺, the content of sintering agent and the phase constitutents in samples. BaSnO₃, Ba₃Sn₂O₇, Ba₂SnO₄ and SnO₂ phases might appear in different fractions when the contents of BaO change from 0.5 mole to 3.5 mole. In low antimony percentage condition, pentavalent Sb³⁺ ions inserted in Sn⁴⁺ sites and formed the donor center. In high antimony percentage (x≥0.20) condition, the existence of an insulating phase (BaSb₂O₆) was confirmed.     

Preparation and Characterization of Polypyrrole/Ferrospinel Nanocomposite by W/O Microemulsion Pathway

A polypyrrole/ferrospinel(NiFe₂O₄) nanocomposite was prepared by the in situ chemical oxidizing of pyrrole in the presence of NiFe₂O₄ nanoparticles in water-in-oil (w/o) microemulsion. The structural, morphological, and magnetic properties of the as-prepared polypyrrole/NiFe₂O₄ nanocomposite were characterized by X-ray diffraction (XRD), Fourier transform infrared spectra, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and magnetic measurements. XRD and FTIR revealed the presence of NiFe₂O₄ in the nanocomposite. SEM and TEM images illustrated that polypyrrole was coated on the NiFe₂O₄ surface. The electromagnetic parameters, such as conductivity, saturation magnetization, and coercivity of NiFe₂O₄ nanoparticles varied after coating with polypyrrole.     

Nonisothermal Crystallization Behavior of Polypropylene Grafted Silane and Styrene Using γ-Ray Irradiation

Polypropylene grafted silane and styrene (named PP-g-Si/St in this article) was successfully prepared by radical graft polymerization initiated by γ-ray irradiation. The influence of total absorbed dose on the graft ratio of vinyltrimethoxysilane onto PP and the melt flow rate (MFR) of the PP-g-Si/St product were studied. The effect of graft ratios of vinyltrimethoxysilane on the melting point and nonisothermal crystallization kinetics of PP-g-Si/St was investigated by the method of differential scanning calorimetry (DSC). With increasing vinyltrimethoxysilane and styrene (used as viscosity modifier and free radical source) grafted on PP, the melting point of PP-g-Si/St became lower. Several different analysis methods, including those of Avrami, Jeziorny, and Mo and colleagues, were employed to describe the nonisothermal crystallization process of the grafted samples. The results indicate that the peak temperature of crystallization of PP-g-Si/St sample was lower than that of virgin PP. Crystallization kinetics revealed that the rates of nucleation and growth were affected differently by the graft ratio of vinyltrimethoxysilane onto PP. The activation energy was calculated on the basis of the method of Kissinger, and the values were 253.6 and 215.7 kJ/mol for virgin PP and PP-g-Si/St, respectively.     

Optical characteristics of subwavelength metallic grating coupled porous film surface plasmon resonance sensor with high sensitivity

A high performance sub-wavelength metallic grating coupled surface plasmon resonance (SWMGCSPR) sensor with metal and porous composite layer is proposed. Rigorous coupled-wave analysis (RCWA) is conducted to prove the design feasibility, characterize the sensor's performance and determine geometric parameters of the structure, which is also employed to compute the electromagnetic (EM) field distributions at the resonant wavelengths. Parameters of sensing platform are optimized to achieve the best performance of the SPR sensor. Obtained results reveal that the proposed structure can excite SPR with negative diffraction order of SWMG. Both wavelength and angular sensitivities are greatly enhanced because surface plasmon wave (SPW) exhibits a large penetration depth which will enlarge the distance of interactions between SP and analytes. The detection sensitivities and quality parameters are estimated to be 700 nm/RIU and 509°/RIU with full width at half maximum (FWHM) less than 2.5 nm using the same optimized structure.