Transmission-mode GaN photocathode based on graded Al_xGa_(1-x)N buffer layer

We create a GaN photocathode based on graded Alx Ga1-x N buffer layers to overcome the influence of buffer-emission layer interface on the photoemission of transmission-mode GaN photocathodes.A gateshaped spectral response with a 260-nm starting wavelength and a 375-nm cut-off wavelength is obtained.Average quantum efficiency is 15% and short wavelength responses are almost equivalent to long wavelength ones.The fitted interface recombination velocity is 5×104 cm/s,with negligible magnitude,proving that the design of the graded buffer layers is efficient in obtaining good interface quality between the buffer and the emission layer.     

Effect of the laser fluence on the surface characterization of β-FeSi2 films prepared by pulsed laser deposition

Single-phase β-FeSi₂ films on silicon (1 0 0) were fabricated by pulse laser deposition. The structure and crystal quality of the samples were characterized by X-ray diffraction and Fourier transform infrared spectroscopy. The field scanning electron microscopy showed that the film thickness increases with the increasing of the laser fluence. Moreover, atomic force microscopy observations revealed the changes of surface properties with different laser fluence. Based upon all experimental results, it is found that 7 J/cm² is the most favorable for the formation of β-FeSi₂ thin films.     

An Inexact SQP Newton Method for Convex SC<Superscript>1</Superscript> Minimization Problems

In this paper, we present a globally and superlinearly convergent inexact SQP Newton method for solving large scale convex SC ¹ minimization problems under mild conditions. In particular, the BD-regularity assumption made by Pang and Qi in Journal of Optimization Theory and Applications, 85 (1995), pp. 633–648 is replaced by a much more realistic assumption. Our numerical experiments conducted on least squares semidefinite programming with lower and upper bounds demonstrate that our inexact SQP Newton method is much more efficient than its exact version and is competitive with existing methods when the number of simple constraints is very large.     

ABCD rule for Gaussian beam propagation in the context of quantum optics derived by the IWOP technique

The development of technique of integration within an ordered product (IWOP) of operators extends the Newton-Leibniz integration rule, originally applying to permutable functions, to the non-commutative quantum mechanical operators composed of Dirac’s ket-bra, which enables us to obtain the images of directly mapping symplectic transformation in classical phase space parameterized by [A, B; C, D] into quantum mechanical operator through the coherent state representation, we call them the generalized Fresnel operators (GFO) since they correspond to Fresnel transforms in Fourier optics. Based on GFO we find the ABCD rule for Gaussian beam propagation in the context of quantum optics (both in one-mode and two-mode cases) whose classical correspondence is just the ABCD rule in matrix optics. The entangled state representation is used in discussing the two-mode case.     

Strain relaxation and surface morphology of high indium content InAlAs metamorphic buffers with reverse step

Low-temperature step-graded high indium content InAlAs (In% = 0.75) metamorphic buffer layers with reverse step layer grown on GaAs substrate by molecular beam epitaxy are investigated in this paper. The composition and the strain relaxation of the top InAlAs layer are determined by high-resolution triple-axis X-ray diffraction measurements, which show that the top InAlAs layer is nearly fully relaxed and the growth parameters for these samples have little influence on the strain relaxation ratio. Surface morphology is observed by reflection high-energy electron diffraction pattern and atomic force microscopy. The surface morphology is found to depend strongly on both the growth temperature and the As flux. Compared with other samples, the sample growth under the optimized conditions has the smallest value of root mean square surface roughness. Furthermore, the ω − 2θ and ω scans of the triple-axis X-ray diffraction and transmission electron microscopy result also show the sample grown under the optimized conditions has good crystalline quality.     

Diode-pumped intra-cavity doubled Nd:LuVO4 laser at 458 nm

We have demonstrated a diode-pumped intra-cavity frequency doubling Nd:LuVO₄ laser operating at 916 nm with a Z-folded cavity. A 10-mm long LBO crystal, cut for critical type I phase matching at 912 nm, is used for the experiment. A maximum output power of 330 mW at 458 nm has been achieved at pump power of 22 W. The optical-to-optical conversion efficiency and slope efficiency is 1.5% and 2.3%, respectively. The power instability at the maximum output power in 30 min is better than 3%.     

Measurement of the elastic constants of a columnar SiC thin film

The technique of resonant ultrasound spectroscopy was used to measure the elastic properties of a polycrystalline cubic silicon carbide (3C-SiC) thin film. The film, grown on a silicon (100) substrate, was 1.69 microns thick with columnar crystalline grains and a (111) texture. The substrate with the film was placed between two transducers and the resonant frequencies were measured; measurements were repeated after selective, timed dry etching of the film, allowing a determination of the elastic constants of the film alone. The film elastic constants, c(11)=371 and c(12)=146 GPa, were within a few percent of the literature values (c(11)=386, c(12)=136 GPa) of crystalline 3C-SiC. However, the film elastic constant c(44), 111 GPa, was significantly smaller than the bulk literature value, 254 GPa. For the film, c44 approximately (c(11)-c(12))/2, indicating that, quite unlike a bulk 3C-SiC crystal, the thin film is elastically isotropic.     

A photonic wire-based directional coupler based on SOI

A photonic wire-based directional coupler based on SOI was fabricated by e-beam lithography (EBL) and the inductively coupled plasma (ICP) etching method. The size of the sub-micron waveguide is 0.34 μm × 0.34 μm, and the length in the coupling region and the separation between the two parallel waveguides are 410 and 0.8 μm, respectively. The measurement results are in good agreement with the results simulated by 3D finite-difference time-domain method. The transmission power from two output ports changed reciprocally with about 23 nm wavelength spacing between the coupled and direct ports. The extinction ratio of the device was between 5 and 10 dB, and the insertion loss of the device in the wavelength range 1520-1610 nm was between 22 and 24 dB, which included an about 18.4 ± 0.4 dB coupling loss between the taper fibers and the polished sides of the device.     

A weighted network evolution with traffic flow

In this paper, we propose a simple weighted network model that generalizes the complex network model evolution with traffic flow previously presented to investigate the relationship between traffic flow and network structure. In the model, the nodes in the network are represented by the traffic flow states, the links in the network are represented by the transform of the traffic flow states, and the traffic flow transported when performing the transform of the traffic flow states is considered as the weight of the link. Several topological features of this generalized weighted model, such as the degree distribution and strength distribution, have been numerically studied. A scaling behavior between the strength and degree s∼klogk is obtained. By introducing some constraints to the generalized weighted model, we study its subnetworks and find that the scaling behavior between the strength and degree is conserved, though the topology properties are quite sensitive to the constraints.     

A novel cationic emulsifier used for preparing slow-cracking and rapid-setting asphalt: Synthesis,surface activity,and emulsification ability

A novel cationic emulsifier including nonionic fatty alcohol polyoxyethylene ether was synthesized in two steps from epichlorohydrin, octadecyl dimethyl amine, and fatty alcohol polyoxyethylene ether, and the intermediate product could also be used as an emulsifier. Their structures were characterized by FTIR, and the surface activities were investigated by surface tension, electrical conductivity, and HLB. The obtained results indicated that the critical micelle concentration (CMC) of the final product was low, 0.442 mmol/L, and the surface tension at the CMC was 41.02 mN/m. The hydrophile-lipophile balance (HLB) value was 12, which meet the requirements of asphalt emulsifiers. A series of experiments of the emulsified asphalt prepared by the emulsifiers were performed. The results showed that the emulsified asphalt could be stably stored for more than 5 days when the emulsifier was 2 wt% and the pH value was between 3 and 4. The result of demulsification experiments showed that the emulsifier is a slow-cracking and rapid-setting asphalt emulsifier.