Syntheses, Structures, and Nonlinear Optical Properties of Two Crown-like Heteroselenometallic Compounds [Et4N]4[(μ5-WSe4)(CuX)5(μ-X)2] (X = Cl, Br)

Two isostructural crown-like heteroselenometallic cluster compounds, [Et₄N]₄[(μ₅-WSe₄)(CuX)₅(μ-X)₂] (X = Cl 1, Br 2), were prepared from the reactions of [Et₄N]₂[WSe₄] with CuX and [Et₄N]X· xH₂O in the presence of 2-picoline and characterized by single-crystal diffraction analysis. The [(μ₅-WSe₄)(Cu-X)₅(μ-X)₂]⁴⁻ anions in the cluster compounds consists of five CuX fragments coordinated to the five edges of the tetrahedral [WSe₄]²⁻ moiety along with two bridging halides connected to each of the two pairs of the symmetric copper atoms, exhibiting a novel crown-like core structure. The nonlinear optical absorption and refraction of cluster compound 2 were determined to be α₂ = 6.15 × 10⁻¹⁰ m/W and n ₂ = 4.18 × 10⁻¹¹ esu, respectively.     

The structure and electrochemical characteristics of La0.67Mg0.33 (Ni0.8Co0.1Mn0.1) x (x=2.5–5.0) multiphase alloys for nickel-metal hydride batteries

This paper presents results concerning structure and electrochemical characteristics of the La_0.67Mg_0.33 (Ni_0.8Co_0.1Mn_0.1) _x (x=2.5–5.0) alloy. It can be found from the result of the Rietveld analyses that the structures of the alloys change obviously with increasing x from 2.5 to 5.0. The main phase of the alloys with x=2.5–3.5 is LaMg₂Ni₉ phase with a PuNi₃-type rhombohedral structure, but the main phase of the alloys with x=4.0–5.0 is LaNi₅phase with a CaCu₅-type hexagonal structure. Furthermore, the phase ratio, lattice parameter and cell volume of the LaMg₂Ni₉phase and the LaNi₅ phase change with increasing x. The electrochemical studies show that the maximum discharge capacity increases from 214.7 mAh/g (x=2.5) to 391.1 mAh/g (x=3.5) and then decreases to 238.5 mAh/g (x=5.0). As the discharge current density is 1,200 mA/g, the high rate dischargeability (HRD) increases from 51.1% (x=2.5) to 83.7% (x=3.5) and then decreases to 71.6% (x=5.0). Moreover, the exchange current density (I ₀) of the alloy electrodes first increases and then decrease with increasing x from 2.5 to 5.0, which is consistent with the variation of the HRD. The cell volume reduces with increasing x in the alloys, which is detrimental to hydrogen diffusion and accordingly decreases the low-temperature dischargeability of the alloy electrodes.     

基于小波变换的循环伏安弱信号特征信息提取

本研究采用连续小波变换(continuous wavelet transform，CWT)技术处理循环伏安弱信号，通过研究苯酚、对苯二酚和对硝基苯酚的共存体系循环伏安弱信号，表明CWT可以成功地识别出极弱信号中的指纹特征信息，并且经处理得到的对应的小波系数峰比原始信号更窄，更高，由此可以成功地确定弱峰的数目和位置。由循环伏安信号所得的结果，有力地证实CWT是循环伏安弱信号识别的有力工具，对于理解弱响应体系电化学机理具有重要作用。     

Water soluble luminescent platinum terpyridine complexes with glycosylated acetylide and arylacetylide ligands: photoluminescent properties and cytotoxicities

Platinum(II) terpyridine complexes with glycosylated acetylide and arylacetylide ligands bind to DNA with binding constants approximately 10(5) mol(-1) dm(3); the glycosylated arylacetylide complexes exhibit emission at lambda(max) approximately 620 nm in water and are up to approximately 100-times higher in potency than the clinical cisplatin drug in killing cancer cells.     

5C + 1S] annulation: a facile and efficient synthetic route toward functionalized 2,3-dihydrothiopyran-4-ones

[reaction: see text] A facile and efficient synthetic route toward highly substituted 2,3-dihydrothiopyran-4-ones 2 has been developed via a formal [5C + 1S] annulation of readily available alpha-alkenoyl ketene-(S,S)-acetals 1 with sodium sulfide nonahydrated salt (Na2S x 9H2O) and utilized in the synthesis of 2-(4-chlorophenyl)-6-(morpholin-4-yl)-4H-thiopyran-4-one 5l, an inhibitor of DNA-dependent protein kinase (DNA-PK).     

Continuation calculations of boron- (aluminum-, titanium-, and nickel-) doped La13 clusters

In this work, we have calculated boron-, aluminum-, titanium-, and nickel-doped La13 clusters by DMOL method based on the density-functional theory. Two doping modes are employed: surface and center doping. The boron, aluminum, and nickel atoms prefer to occupy the surface sites while the titanium atom prefers to occupy the center site. The doped La13 clusters with these four kinds of atoms have lower binding energy than pure La13 clusters. The icosahedral isomers are of lower binding energy than cubotahedral and decahedral isomers for La12B(-1), La12Al(-1), and La12Ni, while doping makes the cubotahedral La12Ti stable with a binding energy a little lower than icosahedral La12Ti. There are electronic shell effects in icosahedral La12B(-1) and La12Al(-1). The icosahedral La12B(-1) is promising to be formed during the doped process experimentally. Furthermore, we have also discussed the distorted structures of center doping by bond lengths, density of states, and charge transfers.     

Controlling the framework formation of silver(I) coordination polymers with 1,4-bis(phenylthio)butane by varying the solvents,metal-to-ligand ratio,and counteranions

The reactions of 1,4-bis(phenylthio)butane (L) with Ag(I) salts in varied conditions (varying the solvents, metal-to-ligand ratios, and counteranions) lead to the formation of four new two-dimensional (2D) coordination polymers with different network structures: [Ag(2)L(3)(ClO(4))(2)](infinity) 1, [Ag(2)L(3)(ClO(4))(2) x CH(3)OH](infinity) 2, [[AgL(2)](ClO(4))](infinity) 3, and [AgLNO(3)](infinity) 4. All the structures were established by single-crystal X-ray diffraction analysis. Crystal data for 1: triclinic, P-1, a = 11.0253(9) A, b = 11.3455(9) A, c = 11.5231(9) A, alpha = 93.931(2) degrees, beta = 92.689(2) degrees, gamma = 112.9810(10) degrees, Z = 2. 2: triclinic, P-1, a = 11.9147(13) A, b = 16.1534(17) A, c = 16.2259(17) A, alpha = 74.977(2) degrees, beta = 69.030(2) degrees, gamma = 69.986(2) degrees, Z = 2. 3: triclinic, P-1, a = 12.1617(9) A, b = 12.5054(10) A, c = 13.1547(10) A, alpha = 64.3370(10) degrees, beta =85.938 (2) degrees, gamma = 69.3010(10) degrees, Z = 2. 4: monoclinic, P2(1)/c, a = 5.4032(17) A, b = 16.974(6) A, c = 19.489(6) A, beta = 94.234(6) degrees, Z = 4. In all four complexes, each Ag(I) center has a tetracoordination geometry, and the 2D networks consist of fused large macrometallacyclic ring systems. The "hexagonal" 42-membered rings, Ag(6)L(6), observed in 1 and 2 are nearly identical, which could be considered as unique examples of self-sustaining noninterpenetrated frameworks formed with flexible ligands. The repeating rectangular 28-membered macrometallacycle, Ag(4)L(4), is the basis for the network of 3, in which the perchlorate anions occupy the voids to prevent the ring from collapsing. In 4, columns of the fused rectangular 22-membered rings, Ag(4)L(2)(NO(3))(2), are cross-linked through the L ligands to form a unique 2D network consisting of two types of 22-membered repeating units.     

Interfacial polymerisation of anilinium at Langmuir monolayers

Anilinium is strongly adsorbed at monolayers of the phospholipid L-alpha-dimyristoylphosphatidic acid (DMPA) and hexadecanesulfonic acid (HDSA) at the air-water interface, and undergoes chemical polymerisation under conditions where bulk polymerisation does not occur.     

Manipulation of protein fingerprints during on-column fluorescent labeling: protein fingerprinting of six Staphylococcus species by capillary electrophoresis

Bacterial proteomes were analyzed by use of electrophoretically mediated microanalysis (EMMA) and field-enhanced stacking. A water-soluble protein fraction was injected onto a capillary. Next, a fluorogenic reagent was injected and allowed to react with the protein mixture, producing fluorescent products that were separated by submicellar capillary electrophoresis and detected by laser-induced fluorescence. By use of a low-ionic strength sample buffer and a brief electrophoretic step, slow moving anionic proteins were stacked at the reagent-sample interface and were preferentially labeled. By reversing the order of sample injection and labeling reagent, fast moving cationic proteins were preferentially labeled. By adjustment of the sample buffer pH, proteins with different isoelectric points were selectively labeled. Electrophoresis fingerprints were generated for the water-soluble protein fraction from six Staphylococcus species. The protein patterns produced were species-specific and were used to construct a phylogenetic tree.