Trace determination of hexabromocyclododecane diastereomers in water samples with temperature controlled ionic liquid dispersive liquid phase microextraction

A novel temperature controlled ionic liquid dispersive liquid phase microextraction(TCIL-DLPME) coupled with rapid resolution liquid chromatography-electrospray tandem mass spectrometry(RRLC-ESI-MS-MS) has been developed for the enrichment and determination of three hexabromocyclododecane diastereomers(HBCDs) in water samples.Green solvent ionic liquid(IL) was used as extraction solvent instead of toxic organic solvents.This technique also avoided the usage of dispersive solvent.Some important parameters that might affect the extraction efficiency were optimized.Under the optimum conditions,good linear relationship,sensitivity and reproducibility were obtained.All the limits of detection for the three diastereomers were 0.1 ng/ mL.The linear range was obtained in the range of 1-100 ng/mL for the total amount of three HBCD diastereomers.It was satisfactory to analyze real environmental water samples with the recoveries ranging from 77.2%to 99.3%.The main advantage of the method is toxic organic solvent-free.     

Graphene-encapsulated iron microspheres on the graphene nanosheets

Graphene nanosheets (GNSs) loading graphene-encapsulated iron microspheres (GEIMs) were fabricated by heat treatment of graphene oxide nanosheets (GONs) with ferric trichloride (FeCl(3)). The special pentagon-hexagonal graphene shells have been produced by precipitation of carbon from metal carbide solutions, thanks to the high reactivity of GONs and ferric nanoparticles dispersing homogeneously between graphene layers. The morphology, structure and elemental composition of GEIMs were investigated by scanning electron microscope, X-ray diffraction and electron energy disperse spectroscope, respectively. The formation mechanism of GEIMs was proposed. Hollow graphene microspheres (HGMs) on the GNSs were obtained with the removal of ferric species in GEIMs. When used as the anode materials for lithium-ion batteries, the almost graphitic HGMs exhibit stable voltage platform at ca. 0.2 V, excellent cycle capability and higher reversible capacity of about 440 mAh g(-1) after 50 cycles and possess great potential application in lithium-ion batteries.     

铜掺杂类金刚石纳米点阵列的制备及场发射性能研究

利用磁过滤等离子体结合氧化铝模板(AA0)技术在室温下制备了具有优异场发射性能的铜掺杂类金刚石(DLC)纳米点阵列.微观分析表明,铜掺杂类金刚石纳米点阵列分布均匀,密度高达109cm-2;利用X射线光电子能谱对制备的铜掺杂类金刚石纳米点阵列进行结构分析,测得铜的掺杂量为3.6;且sp3键含量高达60;;通过对铜掺杂类金刚石纳米点阵列的场发射性能测试,试验结果表明,铜掺杂类金刚石纳米点阵列开启电场和阈值电场分别为0.08V/μm,0.42V/μm,并且在电场值为0.67V/μm时,发射电流密度高达95mA/cm2,场发射性能明显优于无掺杂类金刚石纳米点阵列.     

溶胶-凝胶法制备TiO2-C纳米复合材料的研究

采用溶胶-凝胶法制备了TiO2-C纳米复合材料,利用XRD、SEM和TEM等方法对样品进行分析表征。实验结果表明:网络诱导剂的加入有利于样品在室温下静置后更快凝胶,经600℃焙烧3 h后样品中二氧化钛晶粒有不同程度长大,其特征峰更加明显,且其中二氧化钛晶粒为锐钛矿型;乙酰乙酸乙酯的加入有利于溶胶-凝胶的形成,且随着乙酰乙酸乙酯加入量的增加,TiO2-C纳米复合材料的孔容和孔径均增加。     

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

Lithium metal is one of the most promising anodes for next-generation batteries due to its high capacity and low reduction potential.However,the notorious Li de...     

Inhibitory Effect and Mechanism of Chitosan–Ag Complex Hydrogel on Fungal Disease in Grape

Hydrogel antibacterial agent is an ideal antibacterial material because of its ability to diffuse antibacterial molecules into the decayed area by providing a suitable microenvironment and acting as a protective barrier on the decay interface. The biocompatibility and biodegradation make the removal process easy and it is already widely used in medical fields. However, there have been few reports on its application for controlling postharvest diseases in fruit. In this study, the Chitosan–silver (CS–Ag) complex hydrogels were prepared using the physical crosslinking method, which is used for controlling postharvest diseases in grape. The prepared hydrogels were stable for a long period at room temperature. The structure and surface morphology of CS–Ag composite hydrogels were characterized by UV-Vis, FTIR, SEM, and XRD. The inhibitory effects of CS–Ag hydrogel on disease in grape caused by P. expansum, A. niger, and B. cinerea were investigated both in vivo and in vitro. The remarkable antibacterial activity of CS–Ag hydrogels was mainly due to the combined antibacterial and antioxidant effects of CS and Ag. Preservation tests showed that the CS–Ag hydrogel had positive fresh-keeping effect. This revealed that CS–Ag hydrogels can play a critical role in controlling fungal disease in grapes.     

NO在稀有金属钇表面的吸附行为

以往的理论在预测六方结构(HCP)金属的表面能时,计算值与实验值存在较大误差.鉴于此,本文首先用一种较为合理的方法精准地预测了稀有金属钇(Y)(0001)面的表面能,计算值(1.141 J/M²)与实验值(1.125 J/M²)吻合的很好.随后,系统研究了NO小分子在Y(0001)面不同位置(空位、桥位和端位)的吸附行为.结果表明:空位(H1)表现出了良好的吸附能力,吸附能超过了5eV,同时N-O键长伸长量超过了24%,此时,NO分子几乎平行地吸附于Y(0001)表面.所有的吸附位置的N-O分子伸长量范围为0.2?-0.42?.这种伸长量明显超过了NO在其它金属表面时的计算结果.     

2.45GHz ECR 强流等离子体源核心部件设计与实验研究

电子回旋共振(Electron Cyclotron Resonance,ECR)等离子体源能产生高电荷态离子、高流强的单电荷态离子,提供稳定的束流和良好的重复性.核心部件的设计对ECR等离子体源是至关重要的,磁场对等离子体的生成和分布有直接影响,良好的磁场可以提高等离子体的性能和效率.采用有限元分析方法对ECR等离子体源磁场进行分析与设计,得到了满足设计需求与目标的磁场位形,通过高斯计对设计的永磁环轴向磁场精确测量,发现磁场仿真结果与实验结果吻合比较好,只是轴向磁场最大值及对应位置上有点偏差.通过集成实验,研究核心部件对离子源引出束流强度的影响,引出束流稳定且强度达到7 m A.     

Ultra-Broadband Infrared Metamaterial Absorber for Passive Radiative Cooling

Infrared metamaterial absorber(MMA) based on metal-insulator-metal(MIM) configuration with flexible design,perfect and selective absorption,has attracted much attention recently for passive radiative cooling applications.To cool objects passively,broadband infrared absorption(i.e.8-14 μm) is desirable to emit thermal energy through atmosphere window.We present a novel MMA composed of multilayer MIM resonators periodically arranged on a PbTe/MgF_2 bilayer substrate.Verified by the rigorous coup led-wave analysis method,the proposed MMA shows a relative bandwidth of about 45%(from 8.3 to 13.1 μm with the absorption intensity over 0.8).The broadband absorption performs stably over a wide incident angle range(below 50°) and predicts 12 K cooling below ambient temperature at nighttime.Compared with the previous passive radiative coolers,our design gets rid of the continuous metal substrate and provides an almost ideal transparency window(close to 100%)for millimeter waves over 1 mm.The structure is expected to have potential applications in thermal control of integrated devices,where millimeter wave signal compatibility is also required.     

H2S、HCN、PH3在FeO（100）表面吸附的密度泛函理论研究

基于密度泛函理论研究了H2S、HCN、PH3 在FeO(100)表面的吸附行为,其吸附位点主要考虑四个：Fe-top(铁顶位)、O-top(氧顶位)、Hollow(空位)、Bridge(桥位)。结果表明H2S吸附在O-top吸附位点的吸附能最小,为-1.02ev,即在该位点的吸附体系最稳定。当HCN吸附在FeO(100)表面时,各吸附位点的稳定顺序为Hollow>Fe-top>Bridge>O-top。PH3 的最稳定的吸附位点与H2S的一致,为O-top吸附位点,其吸附能为-1.11ev。当H2S吸附在O-top吸附位点时,H2S与FeO（100）表面的电荷转移量最多,说明该吸附构型最稳定,而HCN吸附在FeO(100)表面,在Hollow吸附位点的电荷转移量最多,也即该吸附位点属于最稳定吸附位点。PH3与FeO（100）表面之间的电荷转移量最多的吸附位点与H2S的相同。当H2S和PH3吸附在O-top吸附位点时,吸附后的态密度曲线整体向低能级移动,峰值降低,其吸附结构变得更加稳定。而HCN吸附在Hollow位点时,吸附后的HCN态密度曲线向能量更低的区域移动,吸附体系变得更稳定。