On-line analysis of polymer melt processes

Molten polymer process streams are difficult to analyze either in- or on-line because of sampling problems due to the high temperature and viscosity of the molten state. Real-time monitoring of chemical compositions in these processes can significantly improve safety and product quality and minimize process costs and waste. The information content of the mid-infrared spectrum combined with the recent development of rugged process Fourier transform (FT) IR spectrometers is stimulating the application of process FT-IR to industrial polymer melt processes. Sampling considerations for polymer melts are reviewed. Also, the use of FT-IR spectrometry for on-line measurements of the polymer composition for polymer blends and copolymers in the melt, and the question of how this information could be used to monitor and control the quality of the product given by the process are discussed.     

Determination of gas-oil miscibility conditions by interfacial tension measurements

Processes that inject gases such as carbon dioxide and natural gas have long been and still continue to be used for recovering crude oil from petroleum reservoirs. It is well known that the interfacial tension between the injected gas and the crude oil has a major influence on the efficiency of displacement of oil by gas. When the injected gas becomes miscible with the crude oil, which means that there is no interface between the injected and displaced phases or the interfacial tension between them is zero, the oil is displaced with maximum efficiency, resulting in high recoveries. This paper presents experimental measurements of interfacial tension between crude oil and natural gases (using a computerized drop shape analysis technique) as a function of pressure and gas composition at the temperature of the reservoir from which the crude oil was obtained. The point of zero interfacial tension was then identified from these measurements by extrapolation of data to determine minimum miscibility pressure (MMP) and minimum miscibility composition (MMC). The gas-oil miscibility conditions thus obtained from interfacial tension measurements have been compared with the more conventional techniques using slim-tube tests and rising-bubble apparatus as well as predictive correlations and visual observations. The miscibility pressures obtained from the new VIT technique were 3-5% higher than those from visual observations and agreed well with the slim-tube results as well as with the correlations at enrichment levels greater than 30 mol% C2+ in the injected gas stream. The rising bubble apparatus yielded significantly higher MMPs. This study demonstrates that the VIT technique is rapid, reproducible, and quantitative, in addition to providing visual evidence of gas-oil miscibility.     

Dimeric iron n-confused porphyrin complexes

A dimeric iron N-confused porphyrin, [Fe(NCTPP)]2 was obtained from the anaerobic reaction of Fe(NCTPP)Br with NaSePh while under aerobic conditions a hydroxo bridged iron dimer with Na bridging the outer-N atoms was obtained and oxygenation occurred on the inner core pyrrolic carbon to form a novel ONCTPP porphyrinic ring.     

Aluminum Lon Removal from Monoaluminum Ovotransferrin by Pyrophosphate

The rates at which aluminum was removed from the N- and C-terminal monoaluminum ovotransferrins by pyrophosphate were evaluated by UV difference spectra in 0.01 mol/L Hepes, pH=7.4 and at 37℃. Pesudo first-order rate constants as a function of pyrophosphate concentration were measured. The results indicate that the pathways of aluminum removal are different. For the N-terminal binding site, aluminum removal follows simple saturation kinetics, while the removal of aluminum from the C-terminal binding site reverts to the combination of saturation and first-order kinetics. The saturation component is consistent with a rate-limiting conformational change in the protein as has been reported. We propose that the first-order kinetics mechanism is attributed to a pre-equilibrium process. The rate constants of saturation kinetics are accelerated from both terminals with the addition of 0.1 mol/L chloride to the monoaluminum ovotransferrin solutions, whereas the rates of the first-order kinetics are decreased for the C-terminal binding site. The effect of chloride ionic strength causes a continuing increase on kobs for the N- and C-terminal binding sites. Moreover, the kinetics behavior of the N-terminal is more easily affected by chloride than that of the C-terminal. In the experiment presumably the N-terminal site is apparently kinetically more labile than the C-terminal site.     

Specific heat and Lindemann-like parameter of metallic clusters: mono- and polyvalent metals

The Brownian-type molecular dynamics simulation is revisited and applied to study the thermal and geometric properties of four mono- and two polyvalent metallic clusters. For the thermal property, we report the specific heat at constant volume CV and study the solid-liquid-like transition by scrutinizing its characteristic. For the geometric property, we calculate the root mean square relative bond-length fluctuation delta as a function of increasing temperature. The thermal change in delta reflects the movement of atoms and hence is a relevant parameter in understanding the phase transition in clusters. The simulated results for the CV of alkali and aluminum clusters whose ground state structures exhibit icosahedral symmetry generally show one phase transition. In contrast, the tetravalent lead is quite often seen to exhibit two phase transitions, a premelting process followed by a progressive melting. In connection with the premelting scenario, it is found here that those (magic number) clusters identified to be of lesser stability (among other stable ones) according to the second energy difference are clusters showing a greater possibility of undergoing premelting process. This energy criterion applies to aluminum clusters nAl=28 and 38. To delve further into the thermal behavior of clusters, we have analyzed also the thermal variation of deltaT and attempted to correlate it with CV(T). It turns out that the premelting (if exist) and melting temperatures of the smaller size clusters (n less, similar 50) extracted from CV do not always agree quantitatively with that deduced from delta.     

Asymmetric silyl nitronate cycloadditions with bornane-10,2-sultam derivatives

Asymmetric silyl nitronate cycloadditions with N-acryloyl (2R)-bornane-10,2-sultam, N-acryloyl (2S)-bornane-10,2-sultam, and N-methacryloyl (2R)-bornane-10,2-sultam have been studied. The asymmetric silyl nitronate cycloaddidon/elimination methodology provides a general route for the asymmetric synthesis of 2-isoxazolines.     

Study of the major fragmentation pathways of cypermethrin and related synthetic insecticides using tandem mass spectrometry

Fragmentation pathways of the synthetic pyrethroid cypermethrin and four structurally related insecticides were investigated using a tandem quadrupole mass spectrometer incorporating a hexapole collision cell under positive-ion electron impact ionization conditions. Conventional mass spectrometry using the first quadrupole analyser only and tandem mass spectrometry on selected precursor ions and product ions, and also constant neutral loss scan experiments, were used. Mechanisms and fragmentation pathways are proposed to explain the inherent stability of ions associated with the benzylphenoxy portion of this class of insecticide.     

Synthesis of some heterocyclic systems from nucleophilic substitution reactions with η6-o-dichlorobenzene-η5-cyclopentadienyliron hexafluorophosphate

A method for the synthesis of heterocylic systems related to 9,10-dihydroanthracene with two hetero-atoms at the 9,10-positions is described. It involves the nucleophilic substitution reaction of η⁶-o-dichlorobenzene-η⁵-cyclopentadienyliron hexafluorophosphate with two nucleophilic groups (OH, SH and/or NH₂) located in the 1,2-positions of a benzene ring to give a cyclopentadienyliron complexed heterocycle. Upon pyrolytic sublimation of the complex, the free heterocyclic compound is then obtained.     

Encrypting Chemical Reactivity in Protein Sequences toward Information‐Coded Reactions†

Controlling chemical reactivity has been the central theme in chemistry. Herein, we review the recent progress on the development of genetically encoded protein coupling reactions and their potential applications. The chemical reactivity is encoded in the protein sequences. The information is read out by folding and molecular recognition between two reactive components and subsequently translated into chemical bonding via autocatalysis. It has emerged as a unique way to tune the chemical reactivity and is regarded as one type of information‐coded reactions. Not only has it received many applications such as protein topology engineering, bioconjugation, biomaterials and synthetic biology, but also its principle may be extended beyond protein chemistry to enable new modes of supramolecular interactions that promote chemical bonding and that are simultaneously reinforced by covalent bonds.     

Trivalent atom contribution on solid-solid transformation of Ga13 polycation intercalated clay into sodalite investigated by X-ray absorption spectroscopy

Solid-solid transformation mechanism of Ga Keggin-type ion intercalated clay into sodalite has been clarified by X-ray diffraction (XRD), FT-IR spectroscopy, and X-rayabsorption spectroscopy (XAS). To follow the structural evolution precisely by XANES and EXAFS, the XAS active element containing polycation [Ga13O4(OH)24(H2O)12]7+ was intercalated into montmorillonite (MMT). FT-IR and XAS spectra confirm that the formation of sodalite framework is initiated by the delocalized rearrangement between silicate networks and collapsed interlayered Ga species, and is followed by the incorporation of Al in the octahedral sheet of clay (MMT). According to the XAS studies, it is found that the formation of Ga(Al)-O-Si species is strongly influenced by the trivalent cations, which are rapidly changed in the environment, followed by reaction with the silicate network of clay during the solid-solid transformation.