Preconcentration and Determination of Chromium Species Using Octadecyl Silica Membrane Disks and Flame Atomic Absorption Spectrometry

A novel and selective method for the fast determination of trace amounts of chromium species in water samples has been developed. The procedure is based on the selective formation of chromium diethyldithiocarbamate complexes at different pH in the presence of Mn(II) as an enhancement agent of chromium signals followed by elution with organic eluents and determination by atomic flame absorption spectrometry. The maximum capacity of the employed disks was found to be (396±3) µg and (376±2) µg for Cr(III) and Cr(VI), respectively. The detection limit of the proposed method is 49 and 43 ng·L^?1 for Cr(III) and Cr(VI), respectively. The proposed method was successfully applied for determination of chromium species Cr(III) and Cr(VI) in different water samples.     

Preparation of PdCo Bimetallic Hollow Nanospheres and its Electrocatalytic Activity for Oxidation of Formic Acid

The performance of the direct formic acid fuel cell (DFAFC) is considerably higher than the direct methanol fuel cell (DMFC) because of some characteristics of formic acid1. For example, formic acid is non-toxic. Formic acid has two orders of magnitude smaller crossover flux through a Nafion membrane than methanol2. In DFAFC, the concentration of formic acid can be as high as 20 mol/L, while the best concentration of methanol in DMFC is only about 2 mol/L3. Thus, the power density of …     

Synthesis of π‐conjugated oligomer that can form metallo polymers

An oligo(p‐phenylene vinylene) that contains terpyridine ligands has been synthesized. Upon addition of metal ions, a π‐conjugated metallo polymer is formed in which the well‐defined character of oligomers and the material properties of polymers are combined. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4020–4023, 2002     

A New Anthraquinone from Clinopodium polycephalum Glyceroyl-1,6,8-trihydroxy-3-methyl-9,10-dioxo-2-anthracene Carboxylate

ClnOPodiumpoIycePhalum(VantjCYWhetHsuancalled'DuanXielin'inChineseisusedinfolkmedicineforthetreatInentofhaemorrhagiadisease.lInordertofmdtheactivecomPounds,studiesonthechedricalconstituentsofthewholeplan,collectedatHuoShanofAnhuiprovince,werecarriedout.Fromthealcoholicextracts,wehaveisolatedanewanthraquinone,Glyceroyl-l,6,8-trihydroxy-3-methyl-9)lO-dioxo-2-anthrcenecarboxylateI(Figurel).Iwasobtainedasredneedles,mP:ll9-l2l"C.TheHR-MSdareaffordedthefor-mulaasCl9Hl6O9(Found388.O791;…     

Adenanthusone,a New Ursane Type Nortriterpenoid from Isodon adenanthus

A new ursane‐type nortriterpenoid, adenanthusone (=(11α,12α)‐4‐demethyl‐11,12‐epoxy‐3,13‐dihydroxy‐2‐oxoursa‐3,20(30)‐diene‐28‐oic acid γ‐lactone; 1 ) was isolated from Isodon adenanthus. Its structure was determined by NMR spectra and X‐ray crystallographic diffraction analysis. The biogenetic implication of the nortriterpene is discussed.     

Synthese und Struktur hochfunktionalisierter 2, 3‐Dihydro‐1H‐1, 3, 2‐diazaborole

Synthesis and Structure of Highly Functionalized 2, 3‐Dihydro‐1H‐1, 3, 2‐diazaboroles A series of differently substituted 2, 3‐dihydro‐1H‐1, 3, 2‐diazaboroles has been prepared by various methods. 1, 3‐Di‐tert‐butyl‐2‐trimethylsilylmethyl‐1H‐1, 3, 2‐diazaborole ( 7 ), 2‐isobutyl‐1, 3‐bis(1‐cyclohexylethyl)‐1H‐1, 3, 2‐diazaborole ( 8 ), 1, 3‐bis‐(1‐cyclohexylethyl)‐2‐trimethylsilylmethyl‐1H‐1, 3, 2‐diazaborole ( 9 ) 1, 3‐bis(1‐methyl‐1‐phenyl‐propyl)‐2‐trimethylsilylmethyl‐1H‐1, 3, 2diazaborole ( 10 ) and 2‐bromo‐1, 3‐bis(1‐methyl‐1‐phenyl‐propyl)‐1H‐1, 3, 2‐diazaborole ( 11 ) were formed by reaction of the corresponding 1, 4‐diazabutadienes with the boranes Me₃SiCH₂BBr₂, iBuBBr₂ and BBr₃ followed by reduction of the resulting borolium salts [R¹ = tBu, Me(cHex)CH, [Me(Et)Ph]C; R² = Me₃SiCH₂, iBu, Br] with sodium amalgam. Treatment of 11 and 12 with silver cyanide afforded the 2‐cyano‐1, 3, 2‐diazaboroles 13 and 14 . An alternative route to compound 8 is based on the alkylation of 2‐bromo‐1, 3, 2‐diazaborole 12 with isobutyllithium. Equimolar amounts of 13 and isobutyllithium give rise to the formation of 15 . The new compounds were characterized by ¹H‐, ¹³C‐, ¹¹B‐NMR, IR and mass spectra. The molecular structures of 7 and meso ‐10 were confirmed by x‐ray structural analysis.     

Influence of pretreatment conditions on low-temperature CO oxidation over Au/MOx/Al2O3 catalysts

Composite oxide MO_x/Al₂O₃ supported gold catalysts for low-temperature CO oxidation were prepared and investigated. The presence of transition metal oxide was proved to be beneficial to the improvement of catalytic performance of Au/Al₂O₃ catalysts for low-temperature CO oxidation. Furthermore, the influence of various pretreatment conditions on Au/MO_x/Al₂O₃ catalysts was studied carefully. The image of TEM showed that gold catalyst with small gold particles only in the form of a fine dispersion exhibited highly catalytic activity. The XPS, Fourier transform infrared (FTIR) spectroscopy characterization results of Au/FeO_x/Al₂O₃ catalyst showed that gold catalysts having partially oxidized gold species have the best catalytic performance. One possible pathway for CO oxidation on Au/FeO_x/Al₂O₃ catalyst is that the CO adsorbed on gold particles reacts with adsorbed oxygen, which is possible to occur on oxygen vacancies on the support or at the metal–support interface.     

A New Chemo‐Enzymatic Route to Side‐Chain Liquid‐Crystalline Polymers: The Synthesis and Polymerization of 6‐(4‐Methoxybiphenyl‐4′‐oxy)hexyl Vinyl Hexanedioate

A novel synthetic method combining chemo and enzymatic synthesis strategies was employed to prepare a vinyl acetate type monomer, 6‐(4‐methoxybiphenyl‐4′‐oxy)hexyl vinyl hexanedioate (VA‐LC). Homo‐ and copolymers of VA‐LC with maleic anhydride (MAn) were prepared by conventional free radical polymerization using 2,2′‐azobisisobutyronitrile (AIBN) and 1,1′‐azobis (cyclohexane carbonitrile) (AHCN) as an initiator at 95 and 60 °C, respectively. The thermal properties of the generated polymeric material were investigated by differential scanning calorimetry (DSC), and the optical texture was inspected by polarizing optical microscopy (POM). While the monomer VA‐LC does not exhibit liquid‐crystalline properties, poly(VA‐LC), and the alternating copolymer of VA‐LC with maleic anhydride both displayed such properties.

     

Synthesis and Structure of K[Cd(O2N‐C6H4‐NNN‐C6H4‐NO2)3], an Anionic 1, 3‐Bis(4‐nitrophenyl)triazenido Complex of Cadmium

The reaction of cadmium acetate in methanol with 1, 3‐bis(4‐nitrophenyl)triazene in THF in the presence of KOH yields K[Cd(O₂NC₆H₄NNNC₆H₄NO₂)₃] in form of hexagonal prismatic, red crystals with the trigonal space group R3¯ and a = 12.229(2), c = 48.988(10) Å and Z = 6. In the anionic cadmium complexes, which are located along the threefold axis, the Cd atoms are coordinated in a trigonal prismatic arrangement by the atoms N(1) and N(3) of three triazenido ligands. The potassium cations are coordinated icosahedrally by oxygen atoms of each one nitro group of six neighbouring anionic complexes. The Cd‐N distances are 2.376(4) and 2.350(4) Å, and the K‐O distances are in the range of 2.833(6) to 3.365(6) Å.