Direct determination of estriol 3- and 16-glucuronides in pregnancy urine by column-switching liquid chromatography with electrospray tandem mass spectrometry

Using column-switching liquid chromatography/tandem mass spectrometry (LC-MS/MS), we developed an improved analytical method of urinary estriol glucuronides. This new method is derived predominantly from maternal and fetal precursors in pregnancy. We used in the following procedure: first, we filtered urine samples with a membrane filter. Next, we directly injected the 50 microL aliquot of urine samples onto a pre-column. Then, after activating the column-switching valve, we backflushed the loaded samples onto the C(18) analytical column. Urine samples can be assayed within 20 min without any sample preparation steps. We monitored separated estriol glucuronides by negative electrospray ionization (ESI) and selected-reaction monitoring (SRM). The calibration range of estriol-3-glucuronide (E3-3G) and estriol-16-glucuronide (E3-16G) was 0.1-20 microg/mL and the linearity of the method was 0.9984 for E3-3G and 0.9987 for E3-16G. The limits of detection at a signal-to-noise (S/N) ratio of 3 were 10 ng/mL (E3-3G) and 5 ng/mL (E3-16G). The analytical recovery was over 85% and, in general, inter-day and intra-day variability for precision and accuracy were less than 10%. When applied to a pregnancy urine sample to biomedical monitoring of the function of the maternal/fetal unit, the proposed method allowed rapid and sensitive screening for the detection of E3-3G and E3-16G.     

Synthesis and Characterization of Fluoro- and Chloro- bimetallic Alkoxides as Precursors for Luminescent Metal Oxide Materials via Sol-Gel Technique

Heterobimetallic alkoxides are broadly recognized as versatile precursors for luminescence materials, and efforts are being made to develop novel routes by applying the concept of geometrical molecular design, for their synthesis and to design a single source precursor suited to photoluminescent materials. Novel and new series of bimetallic alkoxides has been prepared by metathesis route. They exhibit a lower sensitivity towards hydrolysis and so they are easier to handle as compared to other alkoxides. All the compounds were characterized by elemental analysis, FT-IR and multinuclear NMR spectroscopies. FT-IR revealed that the molecular structure of these metal alkoxides was retained to a large extent in 4 ： 1 halogenated alcohol-benzene solution. The heteronuclear NMR spectroscopy provided useful information about chemical shifts for better understanding the likely structure based on interactions with their coordinate metals. The mass spectra show similar types of fragmentation pattern. SEM-EDS analyses showed consistency with the formulation. XRD patterns show an enhanced homogeneity at high temperature. TGA measurements show that thermal decomposition occured in steps that depended entirely on the chemical compositions and the synthesis routes. SEM observation reveals that the morphology and particle size strongly depend on synthesis routes for their precursors.     

Highly stereoselective synthesis of 2,5-disubstituted 3-vinylidene tetetrahydrofurans via Prins-type cyclization

[reaction: see text]. A novel synthetic methodology for 2,5-disubstituted tetrahydrofurans having an allenyl group at the 3-position via Prins-type cyclization was developed. The reaction led to excellent selectivity and moderate to high yields.     

Imide-siloxane block copolymer/silica hybrid membranes: preparation, characterization and gas separation properties

Imide-siloxane block copolymer/silica hybrid membranes with covalent bonds were prepared via sol–gel reaction. The structural informations of these hybrid membranes were obtained by using Fourier transform-infrared spectrometry (FT-IR), ²⁹Si nuclear magnetic resonance (²⁹Si NMR), XPS and thermogravimetric analysis (TGA). The gas separation properties of the hybrid membranes were also investigated in terms of organosiloxane (PDMS) or silica content at various temperatures. In the hybrids, the addition of PDMS phase increased the permeabilities of gases such as He, CO₂, O₂, and N₂, indicating that the gas transport occurred mainly through rubbery organic matrix. Meanwhile, the PDMS phase contributed the decreased gas selectivities to nitrogen but the reduction in selectivities was very small in comparison with other siloxane containing polymeric membranes. This might be due to the restriction of chain mobility by the existence of inorganic component such as silica network in the hybrids. Additionally, the increase of silica content in these hybrid membranes considerably retarded the falling-off of gas selectivity at elevated temperature. The increase of silica content in hybrid membranes resulted in well-formed silica networks and hence these inorganic components restricted the plasticization of organic matrix by the thermal segmental motion of organic components, leading to preventing the large decrease of the gas selectivity.     

Ruthenium-catalyzed reductive cyclization of nitroarenes with trialkylamines leading to quinolines

Nitroarenes react with trialkylamines in the presence of a catalytic amount of a ruthenium catalyst together with tin(II) chloride dihydrate at 180 °C in an aqueous medium (toluene–H₂O) to afford the corresponding quinolines in moderate to good yields. The catalytic pathway seems to be proceeded via a sequence involving initial reduction of nitroarenes to anilines, alkyl group transfer from alkylamines to anilines to form an imine, dimerization of imine, and heterocyclization.     

Photochemical reactions of a dimethacrylate compound containing a chalcone moiety in the main chain

We synthesized the new photosensitive oligomer containing a chalcone moiety in the main chain by end-capping reaction of diepoxide compound with methacrylic acid. The chalcone-epoxy oligomeric compound was synthesized with 4,4^′-dihydroxychalcone and epichlorohydrin. Investigation of the photosensitivity of the newly synthesized chalcone oligomer was carried out by using UV-Vis absorption and infrared spectroscopies under UV exposure. We observed the photodimerization behavior under UV irradiation. At the same time, we could also observe the photopolymerization of the compound with a trace amount of dimethoxyphenyl acetophenone. Thermal properties of UV-cured dimethacrylate compounds were also studied.     

Effect of photothermal therapy on breast tumor vascular contents: noninvasive monitoring by near-infrared spectroscopy

The goal of this study was to investigate the effect of photothermal laser irradiation on rat breast tumor (DMBA-4) vascular contents. An 805-nm diode laser was used in our experiment with a power density ranging from 0.32 to 1.27 W/cm2. The dynamic changes of oxygenated hemoglobin and total hemoglobin concentrations, delta[HbO2] and delta[Hb]total, in rat tumors during photothermal irradiation were noninvasively monitored by a near-infrared spectroscopy system. A multichannel thermal detection system was also used simultaneously to record temperatures at different locations within the tumors. Our experimental results showed that: (1) photoirradiation did have the ability to induce hyperthermic effects inside the rat breast tumors in a single exponential trend; (2) the significant changes (P < 0.005) of delta[HbO2] and delta[Hb]total in response to a low dosage of laser irradiation (0.32 W/cm2) have a single exponential increasing trend, similar to that seen in the tumor interior temperature; and (3) the increase in magnitude of delta[HbO2] is nearly two times greater than that of delta[Hb]total, suggesting that photoirradiation may enhance tumor vascular oxygenation. The last observation may be important to reveal the hidden mechanism of photoirradiation on tumors, leading to improvement of tumor treatment efficiency.     

Synthesis and crystal structures of novel calix[4]azacrowns

A series of novel 1,3‐altemate calix[4]arene azacrowns having mono and bis crown ethers on the lower rim of the calix[4]arene framework were synthesized. Solid‐state structures confirmed the three dimensional conformation of compounds 1–3.     

The use of a thermally reversible bond for molecular imprinting of silica spheres

A silica monomer-estrone complex (EstSi) having a thermally cleavable urethane bond and a cross-linkable triethoxysilane group was synthesized. From EstSi and TEOS, spherical silica particles with sizes of 1.5-3 mum were prepared. The template molecules were removed from the silica matrix by heating at 180 degrees C in DMSO in the presence of water, generating a cavity with an amino group. The control silica particles that had the same sizes and shapes were obtained with aminopropyl triethoxysilane and TEOS. When ethylene glycol was added in place of H2O, an ethyl alcoholic group was formed in the cavity. Their recognition ability and specific binding for estrone were characterized by uptake experiments. The estrone-imprinted silica particles showed a much higher recognition ability than the control silica particles and higher selectivity for estrone than testosterone propionate.     

Scope and mechanistic study of the ruthenium-catalyzed ortho-C-H bond activation and cyclization reactions of arylamines with terminal alkynes

The cationic ruthenium hydride complex [(PCy(3))(2)(CO)(CH(3)CN)(2)RuH](+)BF(4)(-) was found to be a highly effective catalyst for the C-H bond activation reaction of arylamines and terminal alkynes. The regioselective catalytic synthesis of substituted quinoline and quinoxaline derivatives was achieved from the ortho-C-H bond activation reaction of arylamines and terminal alkynes by using the catalyst Ru(3)(CO)(12)/HBF(4).OEt(2). The normal isotope effect (k(CH)/k(CD) = 2.5) was observed for the reaction of C(6)H(5)NH(2) and C(6)D(5)NH(2) with propyne. A highly negative Hammett value (rho = -4.4) was obtained from the correlation of the relative rates from a series of meta-substituted anilines, m-XC(6)H(4)NH(2), with sigma(p) in the presence of Ru(3)(CO)(12)/HBF(4).OEt(2) (3 mol % Ru, 1:3 molar ratio). The deuterium labeling studies from the reactions of both indoline and acyclic arylamines with DCCPh showed that the alkyne C-H bond activation step is reversible. The crossover experiment from the reaction of 1-(2-amino-1-phenyl)pyrrole with DCCPh and HCCC(6)H(4)-p-OMe led to preferential deuterium incorporation to the phenyl-substituted quinoline product. A mechanism involving rate-determining ortho-C-H bond activation and intramolecular C-N bond formation steps via an unsaturated cationic ruthenium acetylide complex has been proposed.