Competition between pi and non-pi cation-binding sites in aromatic amino acids: a theoretical study of alkali metal cation (Li+, Na+, K+)-phenylalanine complexes

To understand the cation-pi interaction in aromatic amino acids and peptides, the binding of M(+) (where M(+) = Li(+), Na(+), and K(+)) to phenylalanine (Phe) is studied at the best level of density functional theory reported so far. The different modes of M(+) binding show the same order of binding affinity (Li(+)>Na(+)>K(+)), in the approximate ratio of 2.2:1.5:1.0. The most stable binding mode is one in which the M(+) is stabilized by a tridentate interaction between the cation and the carbonyl oxygen (O[double bond]C), amino nitrogen (--NH(2)), and aromatic pi ring; the absolute Li(+), Na(+), and K(+) affinities are estimated theoretically to be 275, 201, and 141 kJ mol(-1), respectively. Factors affecting the relative stabilities of various M(+)-Phe binding modes and conformers have been identified, with ion-dipole interaction playing an important role. We found that the trend of pi and non-pi cation bonding distances (Na(+)-pi>Na(+)-N>Na(+)-O and K(+)-pi>K(+)-N>K(+)-O) in our theoretical Na(+)/K(+)-Phe structures are in agreement with the reported X-ray crystal structures of model synthetic receptors (sodium and potassium bound lariat ether complexes), even though the average alkali metal cation-pi distance found in the crystal structures is longer. This difference between the solid and the gas-phase structures can be reconciled by taking the higher coordination number of the cations in the lariat ether complexes into account.     

Bubble-size dependence of the critical electrolyte concentration for inhibition of coalescence

The interaction of pairs of bubbles with equal diameters grown on adjacent capillaries in aqueous magnesium sulfate solutions is observed for varying electrolyte concentrations and bubble diameters. As in previous investigations, a sharp transition from coalescence to bubble detachment without coalescence is observed with increasing electrolyte concentration. The critical electrolyte concentration for this transition is found to increase with decreasing bubble diameter for bubble diameters of 1.4 to 4.2 mm.     

An exact,finite, gauge-invariant,non-perturbative approach to QCD renormalization

A particular choice of renormalization, within the simplifications provided by the non-perturbative property of Effective Locality, leads to a completely finite, non-perturbative approach to renormalized QCD, in which all correlation functions can, in principle, be defined and calculated. In this Model of renormalization, only the Bundle chain-Graphs of the cluster expansion are non-zero. All Bundle graphs connecting to closed quark loops of whatever complexity, and attached to a single quark line, provided no ‘self-energy’ to that quark line, and hence no effective renormalization. However, the exchange of momentum between one quark line and another, involves only the cluster-expansion’s chain graphs, and yields a set of contributions which can be summed and provide a finite color-charge renormalization that can be incorporated into all other QCD processes. An application to High Energy elastic pp scattering is now underway.     

Combining Experimental and Computational Studies to Understand and Predict Reactivities of Relevance to Homogeneous Catalysis

This article showcases three major uses of computational chemistry in reactivity studies: the application after, in combination with, and before experiment. Following a brief introduction of suitable computational tools, challenges and opportunities in the implementation of computational chemistry in reactivity studies are discussed, exemplified with selected case studies from our and other laboratories.     

One step synthesis of Fe4.4Ni17.6Se16 coupled NiSe foam as self-supported,highly efficient and durable oxygen evolution electrode

The development of cost-effective, durable and high-efficient oxygen evolution reaction (OER) electrocatalysts is an extremely critical technology for the large-scale industrial water electrolysis. Here, a new strategy is proposed to significantly enhance the electrocatalytic activity by forming a hybrid electrode of NiSe and Fe_4.4Ni_17.6Se₁₆ through direct selenization of porous iron-nickel (FeNi) alloy foam via thermal selenization process. The obtained self-supported Fe_4.4Ni_17.6Se₁₆/NiSe hybrid (FNS/NiSe) foam displays outstanding durability and remarkable catalytic activity in 1.0 M KOH with low overpotentials of 242 and 282 mV to achieve the current densities of 100 and 500 mA cm^?2, respectively. To the best of our knowledge, it exceeds most of the reported OER electrocatalysts in alkaline electrolytes.     

Detailed large-signal dynamic modelling of DFB laser structures and comparison with experiment

This paper describes the first general large-signal dynamic multiple-mode laser model that incorporates all the main mechanisms known to influence the dynamic behaviour of DFB laser structures with the exception of thermal effects: longitudinal mode spatial hole burning, carrier transport effects, nonlinear gain, and laser and submount parasitics. The time evolution of the output power and wavelength of all modes is predicted, and full spectra can be plotted as a function of time. The model has been extended to include an approximation to the effects of propagation down dispersive fibre, thereby allowing the simulation of filtered received eye diagrams. Detailed comparison of the model with the experimental performance of 2×/8 DFB lasers has shown good agreement, allowing the performance to be optimized, particularly with respect to longitudinal hole burning and carrier transport. The model is also applied to gain-switched operation of 2×/8 DFB structures, fast pulsing of three-section /4 DFB lasers, and the dynamic behaviour of complex coupling coefficient DFB laser structures.     

Wideband subwavelength gratings for coupling between silicon-on-insulator waveguides and optical fibers

We propose and experimentally demonstrate a novel subwavelength grating coupler on silicon-on-insulator, for coupling to optical fibers with a wide optical bandwidth. Theoretical analysis and design optimization of the coupler are described. About 73?nm 1?dB bandwidth was experimentally demonstrated with -5.6 dB coupling efficiency. Better than -3.4 dB efficiency with 86?nm 1?dB bandwidth is predicted for these structures with optimized buried oxide thickness.     

Malformin-A1 (MA1) Sensitizes Chemoresistant Ovarian Cancer Cells to Cisplatin-Induced Apoptosis

High-grade epithelial ovarian cancer is a fatal disease in women frequently associated with drug resistance and poor outcomes. We previously demonstrated that a marine-derived compound MalforminA1 (MA1) was cytotoxic for the breast cancer cell line MCF-7. In this study, we aimed to examine the effect of MA1 on human ovarian cancer cells. The potential cytotoxicity of MA1was tested on cisplatin-sensitive (A2780S) and cisplatin-resistant (A2780CP) ovarian cancer cell lines using AlamarBlue assay, Hoechst dye, flow cytometry, Western blot, and RT-qPCR. MA1 had higher cytotoxic activity on A2780S (IC50 = 0.23 µM) and A2780CP (IC50 = 0.34 µM) cell lines when compared to cisplatin (IC50 = 31.4 µM and 76.9 µM, respectively). Flow cytometry analysis confirmed the cytotoxic effect of MA1. The synergistic effect of the two drugs was obvious, since only 13% of A2780S and 7% of A2780CP cells remained alive after 24 h of treatment with both MA1 and cisplatin. Moreover, we examined the expression of bcl2, p53, caspase3/9 genes at RNA and protein levels using RT-qPCR and Western blot, respectively, to figure out the cell death mechanism induced by MA1. A significant down-regulation in bcl2 and p53 genes was observed in treated cells compared to non-treated cells (p < 0.05), suggesting that MA1 may not follow the canonical pathway to induce apoptosis in ovarian cancer cell lines. MalforminA1 showed promising anticancer activity by inducing cytotoxicity in cisplatin-sensitive and cisplatin-resistant cancer cell lines. Interestingly, a synergistic effect was observed when MA1 was combined with cisplatin, leading to it overcoming its resistance to cisplatin.     

Intercalating lithium into the lattice of silver nanoparticles boosts catalytic hydrogenation of carbon–oxygen bonds

Coinage metal nanoparticles with high dispersion can serve as highly efficient heterogeneous catalysts. However, owing to their low melting point, poor thermal stability remains a major obstacle towards their application under reaction conditions. It is a common practice to use porous inorganic templates such as mesoporous silica SBA-15 to disperse Ag nanoparticles (NPs) against aggregation but their stability is far from satisfactory. Here, we show that the catalytic activity for hydrogenation of dimethyl oxalate (DMO) to methyl glycolate (MG) over Ag NPs dispersed on SBA-15 silica can be further promoted by incorporation of alkali metal ions at small loading, which follows the inverse order of their cationic size: Li⁺ > Na⁺ > K⁺ > Rb⁺. Among these, 5Ag₁–Li_0.05/SBA-15 can double the MG yield compared to pristine 5Ag/SBA-15 under identical conditions with superior thermal stability. Akin to the effect of an ionic surfactant on stabilization of a micro-emulsion, the cationic charge of an alkali metal ion can maintain dispersion and modulate the surface valence of Ag NPs. Interstitial Li in the octahedral holes of the face center packed Ag lattice is for the first time confirmed by X-ray pair distribution function and electron ptychography. It is believed that this interstitial-stabilization of coinage metal nanoparticles could be broadly applicable to multi-metallic nanomaterials for a broad range of C–O bond activating catalytic reactions of esters.

Coinage metal nanoparticles with high dispersion can serve as highly efficient heterogeneous catalysts.