掺入Ni元素的LiCoO2晶体光谱结构及电子顺磁共振g因子

在弱场图像下,利用Racah不可约张量算符方法得到了三角对称3d4/3d6电子组态的210阶可完全对角化的微扰哈密顿矩阵、最近邻点电荷模型晶体结构常量公式和电子顺磁共振g因子公式.研究了LiCoO2晶体和掺入Ni的LiCoO2:Ni晶体中Co3+的基态能级、晶体结构和电子顺磁共振g因子.考虑了LiCoO2晶体和LiCoO2:Ni晶体中自旋单重态和三重态对Co3+基态能级的影响,讨论了LiCoO2晶体和在LiCoO2晶体中掺杂Ni后Co3+局域结构常量大小的变化是引起Co3+的基态能级变化的主要原因,理论和实验都证实了这一点.还计算了掺杂前后的电子顺磁共振g因子,计算结果与实验值符合得较好.     

High-Power Diode-End-Pumped Slab Composite Tm:YLF Compact Laser

We design a continuous-wave Tm:YLF laser with a composite slab crystal end-pumped by two fiber-coupled laser diodes at room temperature. We achieve a maximum continuous wave output power of 105 W for the bonded slab Tm:YLF laser; the corresponding slope efficiency is 47.7% and the optical-to-optical conversion efficiency is 42.0% with respect to the incident pump power. The laser operated at 1,907.5 nm with a beam quality factor of M² ～3.2 at the highest output power.     

HL-2M环向场线圈电磁场和受力的计算分析

在建的HL-2M装置的环向场线圈采用了比特板式结构,介绍了采用封闭多边形电流丝模型计算分析HL-2M装置环向场线圈电磁场和纹波情况;环向场线圈电流与环向场引起的电磁力以及与极向场产生的倾覆力也做了计算。计算结果对环向场线圈的设计具有一定的参考意义。     

HL-2M极向场线圈电磁力的计算分析

在建的HL-2M装置的PF线圈采用了混合式结构。在放电过程中,线圈之间有很强的电磁耦合,每一个线圈都会受到很大电磁力的作用。采用解析法,在最大I_p=3MA等离子体电流和各种位形的放电条件下,计算分析了PF线圈受到的电磁力。这些计算结果对PF线圈及其支撑结构的设计都是具有参考价值的。     

一种新的网络传播中最有影响力的节点发现方法

在复杂网络的传播模型研究中, 如何发现最具影响力的传播节点在理论和现实应用中都有重大的意义. 目前的研究一般使用节点的度数、紧密度、介数和K-shell等中心化指标来评价影响力, 这种方法虽然简单, 但是由于它们仅利用了节点自身的内部属性, 因而在评价影响力时精确度并不高, 普遍性适用性较弱.为了解决这个问题, 本文提出了KSC (K-shell and community centrality)指标模型. 此模型不但考虑了节点的内部属性, 而且还综合考虑了节点的外部属性, 例如节点所属的社区等. 然后利用SIR (susceptible-infected-recovered)模型对传播过程进行仿真, 实验证明所提出的方法可以更好地发现最具有影响力的节点, 且可适用于各种复杂网络. 本文为这项具有挑战性研究提供了新的思想和方法. 关键词： 复杂网络 最具影响力的节点 社区划分 中性化测量     

Quantum Dialogue with Authentication Based on Bell States

We propose an authenticated quantum dialogue protocol, which is based on a shared private quantum entangled channel. In this protocol, the EPR pairs are randomly prepared in one of the four Bell states for communication. By performing four Pauli operations on the shared EPR pairs to encode their shared authentication key and secret message, two legitimate users can implement mutual identity authentication and quantum dialogue without the help from the third party authenticator. Furthermore, due to the EPR pairs which are used for secure communication are utilized to implement authentication and the whole authentication process is included in the direct secure communication process, it does not require additional particles to realize authentication in this protocol. The updated authentication key provides the counterparts with a new authentication key for the next authentication and direct communication. Compared with other secure communication with authentication protocols, this one is more secure and efficient owing to the combination of authentication and direct communication. Security analysis shows that it is secure against the eavesdropping attack, the impersonation attack and the man-in-the-middle (MITM) attack.     

The effect of Cu substitution on the A1g mode of La0.7Sr0.3MnO3 manganites

We report on the first Raman data of Cu substituted La_1−ySr_yMn_1−xCu_xO₃ (0≤x≤0.10 and 0.17≤y≤0.3, accordingly in order to have the same Mn⁴⁺/[Mn⁴⁺+Mn³⁺] ratio), collected in the frequency range 100-900 cm⁻¹ and at room temperature, with parallel (e_i∥e_s) and crossed (e_i⊥e_s) polarizations of the incident (e_i) and scattered (e_s) light. Spectra were fitted with a Drude-Lorentz model, and peaks at 190-220 and 430 cm⁻¹, together with two broad structures centered at near 500 and 670 cm⁻¹, have been found. We also have observed that the A_1g mode is substantially shifted with increasing Cu substitution. The A_1g phonon shift is a linear function of the tolerance factor t and the rhombohedral angle α_r, thus following the structural changes of the MnO₆ octahedra in the system.     

Piezoelectric PMN-PT fibre hydrophone for ultrasonic transducer calibration

A newly developed ceramic fibre hydrophone with an active element as small as 0.25 mm in diameter is described in this work. Lead magnesium niobate-lead titanate (PMN-PT) ceramic fibre with a nominal composition of 0.65Pb(Mg_1/3Nb_2/3)O₃-0.35PbTiO₃ was fabricated by an extrusion method. PMN-PT single crystals were ground to a powder form and then mixed with poly(acrylic) acid to form a homogenous slurry. The fibre was extruded by pressing the slurry through a spinneret and then sintering at 1250 °C for crystallization. The electrical characteristics of the PMN-PT fibre were evaluated by measuring the relative permittivity and the impedance spectrum. A piezoelectric PMN-PT fibre hydrophone was fabricated and its sensitivity, angular response, and spatial resolution were evaluated. The fibre hydrophone provides good spatial resolution, angular response and receiving sensitivity. PACS 43.58.+z; 77.84.Dy     

Diode-Side-Pumped Passively Q-Switched Mode-Locked 532 nm Laser with a Nd:YAG/Cr4+:YAG/YAG Composite Crystal

We present a diode-side-pumped Q-switched mode-locked (QML) laser operating at 532 nm for the first time employing a composite crystal Nd:YAG/Cr⁴⁺:YAG/YAG and a KTP. The experimental results show that, using a suitable cavity and crystals, one can obtain high-quality QML laser output at 532 nm with a side-pumped system. We measure and analyze the QML performance of the fundamental frequency laser and the green laser. Under a pump power of 127 W, we obtain a QML laser operating at 532 nm with an average power of 4.97 W and a repetition rate of 0.2 GHz for the mode-locked pulses; the corresponding depth of modulation is close to 100%.