XAFS和XRD研究高能球磨对Fe70Cu30合金结构的影响

利用XRD和XAFS方法研究机械合金化Fe₇₀Cu₃₀二元金属合金随球磨时间的结构变化.XRD结果表明，球磨2 h后，部分金属Fe与Cu生成Fe-Cu合金；球磨20h后，金属Fe与Cu已完全合金化生成Fe-Cu合金，并只在2θ=44°处出现一个宽化的弱衍射峰，认为是在球磨20h后的Fe₇₀Cu₃₀合金中共存着fcc和bcc结构的Fe-Cu合金相.XAFS结果进一步表明，在球磨的初始阶段(2h)，fcc结构的Cu颗粒的晶 关键词： XAFS XRD 70Cu₃₀合金')" href="#">Fe₇₀Cu₃₀合金 机械合金化     

热处理参数对溶胶-凝胶法制备氧化锌薄膜特性的影响

采用溶胶-凝胶旋涂法在Si(111)衬底上生长了ZnO薄膜，并用荧光光谱、原子力显微镜和XRD对ZnO薄膜样品进行了分析.结果表明，溶胶-凝胶旋涂法制备的ZnO薄膜为纤锌矿结构，其c轴取向程度与热处理温度有很大的关系.当热处理温度小于550℃时，氧化锌薄膜在室温下均有较强的紫外带边发射峰，而可见波段的发射很弱；当热处理温度高于550℃时，可见波段发射明显增强.对经过不同时间热处理的ZnO薄膜样品分析表明，氧化锌薄膜的荧光特性及表面形貌与热处理时间也有很大关系，时间过短可见波段的发射较强，但时间过长会导致晶 关键词： ZnO薄膜 光致发光     

中子与90,91,92,94Zr反应的理论计算和分析

根据中子与天然Zr及其同位素反应的总截面,去弹截面和弹性散射角分布的实验数据,得到一组普适的光学模型势参数;应用得到的光学模型势参数,光学模型,Hauser-Feshbach理论,预平衡反应的激子模型和扭曲波玻恩近似理论,系统计算和分析了中子与^90,91,92,94Zr反应的非弹散射角分布和双微分截面,理论结果与实验很好的一致.     

巯基棉分离富集-FAAS法测定海水中的痕量镉

借助巯基棉分离富集技术 ,以火焰原子吸收光谱法测定海水中的痕量镉。该方法的回收率为94 .0 %— 97.0 % ,相对标准偏差为 4 .9%。结果表明 ,该方法简单易行 ,具有较好的准确度和精密度     

关于两类污染数据回归分析的参数估计

研究简单回归模型：ｙｊ＝ａ＋βｘｊ＋εｊ，ｊ＝１，２，…，ｎ，其中Ｅεｊ＝０，Ｅε＾２ｊ＝σ＾２ｊ；但ｙ１，ｙ２，…，ｙｎ受到另一独立同分布随机变量序列ｔ，ｔ２，…，ｔｎ两种不同方式的污染，ｔｊ与ｙｊ独立。本文给出了两种污染方式下的ａ、β和污染参数的估计。     

虚拟仪器技术及乐音的频谱分析

阐述了虚拟仪器技术的概念和特点,精确测量了３ 种乐音信号的波形、频谱和频率     

火焰原子吸收光谱法测定钙盐试剂中的痕量镉

采用巯基棉分离富集钙盐试剂中的前量镉,用火焰原子吸收光谱法进行测定。方法简便、快速,结果满意。样品测定的相对标准偏差均小于４．８１％。     

Decoquinate derivatives: A new class of potent antischistosomal agents against Schistosoma japonicum

Decoquinate (1), an old and inexpensive coccidiostat, exhibited potent antimalarial activity, however, its antischistosomal activity against Schistosoma japonicum has not yet been evaluated. Based on decoquinate, a series of decoquinate derivatives was designed, synthesized, evaluated as a new class of antischistosomal agents against S. japonicum adult worms in vitro. Among them, compound 15 killed 100% of adult S. japonicum in 72 h at the concentration of 10 μmol/L in vitro, exhibited stronger wormkilling activity than PZQ in vitro and could serve as a promising lead compound to develop new antischistosomal agents.     

Formation and crystal structure of metallic inclusions in a HPHT as-grown diamond single crystal

One of the most important characteristics associated with crystal growth technology is the entrapment of inclusions by the growing crystal. Diamond single crystals prepared under high temperature-high pressure (HPHT) usually contain metallic inclusions. In the present paper, metallic inclusions in a diamond grown from a Fe-Ni-C system using the HPHT method have been, for the first time, systematically examined by transmission electron microscopy (TEM). Energy dispersive X-ray spectrometry (EDS) , combined with selected area electron diffraction (SAD) patterns, has been used to identify the chemical composition and crystal structure of the metallic inclusions. The metallic inclusions were found to be composed mainly of cubic γ-(FeNi), face-centered cubic (FeNi)₂₃C₆, ortho-rhombic Fe₃C and hexagonal Ni₃C, which may have been formed through the entrapment of molten catalyst by the growth front or through reaction of the trapped melt with contaminants in the diamond. Received: 19 June 2000 / Accepted: 21 June 2000 / Published online: 16 August 2000