A hydrophobic deep eutectic solvent‐based vortex‐assisted dispersive liquid–liquid microextraction combined with HPLC for the determination of nitrite in water and biological samples

In recent years, hydrophobic deep eutectic solvents as new generation of green solvents have attracted wide attention in liquid microextraction technique. In this article, four hydrophobic deep eutectic solvents composed of trioctylmethylammonium chloride and oleic acid were designed and prepared firstly. Combined with high‐performance liquid chromatography, these deep eutectic solvents were used as an extraction solvent in vortex‐assisted dispersive liquid–liquid microextraction for the selective enrichment and indirect determination of trace nitrite from real water and biological samples. This method is based on the diazotization‐coupling reaction of nitrite with p‐nitroaniline and diphenylamine in acidic water, and then the nitrite is quantified indirectly by measuring the obtained azo compounds. Some factors influencing the extraction efficiency, including the reaction and extraction conditions, were investigated. Under the optimized conditions, the method has a linear range of 1–300 μg/L with a correlation coefficient of 0.9924, limit of detection of 0.2 μg/L, limit of quantitation of 1 μg/L, intraday and interday relative standard deviations of 4.0 and 6.0%. This method was successfully applied in determination of nitrite from three environmental water and two biological samples with the recovery in the range of 90.5–115.2%. In addition, these results were well agreement with those obtained by the conventional Griess method.     

Protein identification from two-dimensional gel electrophoresis by connecting ZipTip with a home-assembled nanoflow system

Mass spectrometry (MS) is a powerful technique for protein identification in proteomic research. Two-dimensional gel electrophoresis (2-DE) combined with MS is a significant method for protein separation and identification. For protein identification, peptide sequencing is usually carried out by an effective but expensive nano-flow liquid chromatographic system combined to tandem mass spectrometry (MS/MS). However, protein identification based on such method is time-consuming, and contamination may occur as a result of column overloading. In this study, we establish an alternative nanoscale system for protein identification using MS/MS. The system consists of several devices that can be purchased from commercial sources and can be connected to an electrospray ionization quadrupole-time of flight (ESI-Q-TOF) MS in order to analyze proteins from 2D gels. This inexpensive strategy provides an attractive alternative method for rapid identification of proteins using a nanospray source. In addition, the device is disposable so that contamination is avoided. It is shown that peptide sequencing based on this device using ESI-Q-TOF MS is accomplished within 10 min.     

强磁场碳黑催化法制备纳米新金刚石粉

在直流恒稳强磁场(10T)作用下,以纳米铁为催化剂,碳黑为碳源,在常压和1100℃下保温100min成功地制备出了类金刚石和新金刚石,并用XRD,TEM和Raman对制备的样品粉末进行表征．结果表明,样品粉末是由纳米类金刚石粉和石墨包覆新金刚石纳米颗粒组成,纳米类金刚石粉的大小为20nm,石墨包覆新金刚石的大小为100nm．     

Immunochemical determination of dioxins in sediment and serum samples

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are considered highly toxic contaminants and the environmental and biological monitoring of these compounds is of great concern. Immunoassays may be used as screening methods to satisfy the growing demand for rapid and low cost analysis. In this work, we describe the application of an immunoassay that uses 2,3,7-trichloro-8-methyldibenzo-p-dioxin (TMDD) as a surrogate standard for 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) to sediment and human serum samples. Sample extraction and preparation methods were developed with the aim to establish the simplest, cost-effective and efficient removal of the matrix interferences in the enzyme-linked immunosorbent assay (ELISA). The overall method for sediments is based on a hexane extraction; clean up by a multilayered silica gel column and an activated carbon column; an organic solvent exchange with DMSO–Triton X-100 and ELISA measurement. The gas chromatography–high resolution mass spectrometry (GC–HRMS) validation studies (n = 13) revealed that the method is suitable for the toxic equivalents (TEQ) screening of dioxin in sediments with a method detection limit of about 100 pg g⁻¹ dry sediment with a precision of 13–33% R.S.D. The analysis of a large number of samples originating from different sources would be required to establish more precisely the screening level, as well as the number of false positives and negatives of dioxin TEQ by the immunoassay for sediments. The immunoassay method for sediment analysis offers improvement in speed, sample throughput, and cost in comparison to GC–HRMS. Dioxins were determined in serum samples after a simple liquid–liquid extraction and solvent exchange into DMSO–Triton X-100 without further dilution. The current method (approximate method LOQ of 200 pg ml⁻¹ serum) is not sufficiently sensitive for the determination of dioxins in serum to measure acceptable exposure limit.     

Ultrafast Photoinduced Electron Transfer between an Incarcerated Donor and a Free Acceptor in Aqueous Solution

Supramolecular photoinduced electron transfer dynamics between coumarin 153 (C153) and 4,4'-dimethyl viologen dichloride (MV(2+)) across the molecular barrier of a host molecule, octa acid (OA), has been investigated with femtosecond time resolution. The ultrafast electron transfer from C153 to MV(2+) followed excitation with 150 fs laser pulses at a wavelength of 390 nm despite the fact that C153 was incarcerated within an OA(2) capsule. As a result, the photoexcited coumarin did not show any of the typical relaxation dynamics that is usually observed in free solution. Instead, the excited electron was transferred across the molecular wall of the capsuleplex within 20 ps. Likewise, the lifetime of the charge transfer state was short (724 ps), and electron back-transfer reestablished the ground state of the system within 1 ns, showing strong electronic coupling among the excited electron donor, host, and acceptor. When the donor was encapsulated into the host molecule, the electron transfer process showed significantly accelerated dynamics and essentially no solvent relaxation compared with that in free solution. The study was also extended to N-methylpyridinium iodide as the acceptor with similar results.     

Octahedral CuII and NiII complexes manifesting with N′-[1-(pyridin-2-yl)ethylidene] acetohydrazide: Structural outlooks and spectral characteristics

A tridentate hydrazone precursor, N′-[1-(pyridin-2-yl)ethylidene]acetohydrazide (L) (1:1 refluxed product of acetichydrazide and 2-acetylpyridine), produced two octahedral Cu^II and Ni^II derivatives, [CuL₂]·NO₃ (1) and [NiL₂]·ClO₄·H₂O (2). Both are subjected to X-ray diffraction system, and structural investigation shows that the central metal atom (Cu^II or Ni^II) adopts a distorted octahedral geometry with N₄O₂ donor sets by coordination of a pair of independent hydrazone precursors. Besides X-ray study, IR and UV-vis spectra, thermal analysis and room temperature magnetic moments are utilized for establishing significant characteristics of both complexes. It is apparent that the M-N_pyridine bonds are slightly longer than the M-N_imino bonds, Cu1-N1 and Cu1-N4 [2.300(2) and 2.038(2) ?] for 1 and Ni1-N1 and Ni1-N4 [2.075(2) and 2.084(1) ?] for 2, Cu1-N2 and Cu1-N5 [2.062(1) and 1.932(1) ?] for 1 and Ni1-N2 and Ni1-N5 [2.008(2) and 1.975(2) ?] for 2, respectively. As per our observation, the effective magnetic moment value (μ_eff) is found to be 1.77 B.M. for 1 and 3.06 BM for 2, respectively.     

A Hairpin Electrochemical Aptasensor for Sensitive and Specific Detection of Thrombin Based on Homogenous Target Recognition

An electrochemical aptasensor was developed for sensitive and specific detection of thrombin by combining homogenous recognition strategy and gold nanoparticles (AuNPs) amplification. Streptavidin‐alkaline phosphatase was used as reporter molecule. Compared with the traditional hairpin aptasensor monitoring the distance of the redox molecule from the electrode surface, the proposed aptasensor successfully overcome the limitations of distance and improved the stability and high affinity of the aptamer hairpin through homogenous recognition, which enhanced the sensitivity and selectivity of the sensors effectively. Additionally, AuNPs were employed to increase the active area and conductivity of the electrode, thus, improving the sensitivity of the aptasensor. As a result, the designed thrombin detection sensor obtained a lower detection limit of 0.52 pM in buffer and 6.9 pM in blood serum.     

One-Pot Etherification of Ketones and Aldehydes with Organic Halides Using Sodium Hydride as a Reductant

One-pot etherification reaction of aromatic and some aliphatic carbonyl compounds with organic halides in the presence of sodium hydride as a reducing reagent proceeded smoothly in dioxane, a polar solvent with higher boiling point, to provide desired ethers in moderate to high yields.     

Large-area periodic lead halide perovskite nanostructures for lenticular printing laser displays

Lenticular printing technique provides a promising way to realize stereoscopic displays,especially,when microscopic optical structures are integrated into light-emitting materials/devices.Here,we fabricated large-area periodic structures with a spatial resolution at a wavelength scale from hybrid perovskite materials via a space-confined solution growth method.It takes advantages of both high refractive index contrast and high luminescence brightness,which allows the optical modulation on not only the reflection of illumination,but also the light emission from hybrid perovskites.The distributed feedback within these periodic structures significantly improves the degree of polarization and directionality of laser actions while their threshold is also reduced.These findings enable us to present a prototype of lenticular printing laser displays that vary emission colors at different view angles,which may find applications in creating high-resolution and high-contrast holographical images.