Simultaneous soft pulses applied at nearby frequencies

The rotation of a spin subject to an on-resonance soft pulse and simultaneously to a soft pulse at a nearby frequency may strongly deviate from the desired rotation expected for a single on-resonance pulse. The deviation is the result of transient frequency shifts of the spin caused by the off-resonance irradiation. We show that the resulting error can be corrected by shifting the frequency of the on-resonance pulse in such a way that it tracks the shift of the spin frequency. Experimentally, the effectiveness of this simple and intuitive method is demonstrated for simultaneous inversions at nearby frequencies in the case of both coupled and uncoupled spins. Simulations predict that the correction technique is effective for arbitrary pulse shapes and tip angles and is particularly useful when the frequency window of the shaped pulse is two to eight times the frequency separation between the chemical shifts of the two spins.     

Evaluation of nanoparticle emission for TiO<Subscript>2</Subscript> nanopowder coating materials

In this study, nanoparticle emission of TiO₂ nanopowder coated on different substrates including wood, polymer, and tile, was evaluated in a simulation box and measured with a Scanning Mobility Particle Sizer (SMPS) for the first time. The coating process for the substrate followed the instructions given by the supply company. In the simulation box, UV light, a fan, and a rubber knife were used to simulate the sun light, wind, and human contacting conditions. Among the three selected substrates, tile coated with TiO₂ nanopowder was found to have the highest particle emission (22 #/cm³ at 55 nm) due to nanopowder separation during the simulation process. The UV light was shown to increase the release of particle below 200 nm from TiO₂ nanopowder coating materials. The results show that, under the conditions of UV lamps, a fan and scraping motion, particle number concentration or average emission rate decreases significantly after 60 and 90 min for TiO₂/polymer and TiO₂/wood, respectively. However, the emission rate continued to increase after 2 h of testing for TiO₂/tile. It is suggested that nanoparticle emission evaluation is necessary for products with nanopowder coating.     

State transitions and the continuum limit for a 2D interacting, self-propelled particle system

We study a class of swarming problems wherein particles evolve dynamically via pairwise interaction potentials and a velocity selection mechanism. We find that the swarming system undergoes various changes of state as a function of the self-propulsion and interaction potential parameters. In this paper, we utilize a procedure which connects a class of individual-based models to their continuum formulations and determine criteria for the validity of the latter. H-stability of the interaction potential plays a fundamental role in determining both the validity of the continuum approximation and the nature of the aggregation state transitions. We perform a linear stability analysis of the continuum model and compare the results to the simulations of the individual-based one.     

Fiber-optic CATV system performance improvement by using split-band technique and photonic crystal fiber

A directly-modulated amplitude modulation-vestigial sideband (AM-VSB) cable television (CATV) erbium-doped fiber amplifier (EDFA)-repeated system that uses split-band technique and photonic crystal fiber (PCF) as a broadband dispersion compensation device is proposed and demonstrated. In contrast to a conventional externally-modulated fiber-optic CATV system, good performance of carrier-to-noise ratio (CNR), composite second order (CSO) and composite triple beat (CTB) were obtained in our proposed systems over a combination of 100-km single-mode fiber (SMF) and 3.6 km PCF.     

Determining the resistance of X-pinch plasma

The current and the voltage of an X-pinch were measured. The inductance of the X-pinch was assumed to be a constant and estimated by the calculation of the magnetic field based on the well-known Biot-Savart's Law. The voltage of the inductance was calculated with L · di/dt and subtracted from the measured voltage of the X-pinch. Then, the resistance of the X-pinch was determined and the following results were obtained. At the start of the current flow the resistance of the exploding wires is several tens of Ohms, one order of magnitude, higher than the metallic resistance of the wires at room temperature, and then it falls quickly to about 1 , which reflects the physical processes occurring in the electrically exploding wires, i.e., a current transition from the highly resistive wire core to the highly conductive plasma. It was shown that the inductive contribution to the voltage of the X-pinch is less than the resistive contribution. For the wires we used, the wires' material and diameter have no strong influence on the resistance of the X-pinch, which may be explained by the fact that the current flows through the plasma rather than through the metallic wire itself. As a result, the current is almost equally divided between two parallel X-pinches even though the diameter and material of the wires used for these two X-pinches are significantly different.     

卤化物固态电解质研究进展

全固态电池因其高能量密度和高安全性而成为具有发展前景的下一代储能技术。开发具有高室温离子电导率、优异化学/电化学稳定性、良好正/负极兼容性的固态电解质是实现全固态电池实用化的关键。卤化物固态电解质因其优异的电化学窗口、高正极稳定性、可接受的室温锂离子电导率等优势,受到了广泛的关注。本文通过对近年来卤化物电解质的相关研究进行总结,综述了该类电解质的组成、结构、离子传导路径及制备方法,并分析了金属卤化物电解质的电导率、稳定性特点,归纳了近年来该电解质在全固态电池中具有代表性的应用,并基于以上总结和分析,指出了卤化物固态电解质的研究难点及发展方向。     

基片温度对SiNx薄膜结晶状态及机械性能的影响

利用微波电子回旋共振增强磁控反应溅射法在不同基片温度下制备无氢SiNx薄膜.通过傅里叶变换红外光谱、透射电子显微镜、台阶仪、纳米硬度仪等表征技术,研究了基片温度对SiNx薄膜结晶状态、晶粒尺寸、晶体取向等结晶性能以及薄膜的生长速率、硬度等机械性能的影响,并探讨了薄膜结晶性能与机械性能之间的关系.研究结果表明,在基片温度低于300℃时制备的SiNx薄膜以非晶状态存在,硬度值仅为18 GPa左右;基片温度在320-620℃范围内,SiNx薄膜中出现纳米晶粒,且晶粒尺寸随沉积温度的增加而增加,在沉积温度为620℃时达到最大,为20±1.5 nm;当沉积温度为700℃时,SiN<,x>薄膜的晶粒尺寸突然减小,但由于此时晶粒密度为最大,因此薄膜硬度达到最大值(36.7 GPa).     

我国潜在产出、自然利率与均衡汇率的联合估计及其应用

本文以开放经济下的新凯恩斯宏观经济动态模型为理论依据,基于状态空间模型方法对我国潜在产出、自然利率以及均衡汇率在统一的框架下进行了定量估计,并进一步计算出相应的产出缺口、实际利率缺口与实际汇率缺口,以此作为参照指标对我国宏观经济波动态势、名义利率调整行为以及人民币汇率水平的合理性进行系列分析。分析表明,本文所得到的估计结果不仅是合理、可靠的,而且可以作为我国宏观经济波动态势判断、货币政策制定和效果评价的有用参考。     

Mid-IR dual-wavelength difference frequency generation in uniform grating PPLN using index dispersion control

A novel widely tunable dual-wavelength mid-IR difference frequency generation （DFG） scheme with uniform grating periodically poled lithium niobate （PPLN） is presented in this paper. By using the temperature-dependent dispersion property of PPLN, the quasi-phase matching （QPM） peak for the pump may evolve into two separate ones and the wavelength spacing between them increases with the decrease of the crystal temperature. Such two pump QPM peaks may allow simultaneous dual-wavelength mid-IR laser radiations while properly setting the two fundamental pump wavelengths. With this scheme, mid-IR dual-wavelength laser radiations at around 3.228 and 3.548, 3.114 and 3.661, and 3.019 and 3.76 μm, are experimentally achieved for the crystal temperatures of 90, 65, and 30 ℃, respectively, based on the fiber laser fundamental lights.     

肽核酸骨架分子键联卟啉的合成及结构表征

以5,10,15-三苯基-20-(4-羧基苯基)卟啉和5,10,15-三苯基-20-(4-羟基苯基)卟啉为原料, 分别与N-(Boc-氨乙基)甘氨酸乙酯(3)及其衍生物4作用, 得到了两种肽核酸骨架分子键联卟啉化合物6和8. 中间体和目标化合物均由紫外-可见光谱、红外光谱、核磁共振光谱、质谱及元素分析所确证. 目标化合物的荧光光谱测试结果表明, 肽核酸单元分子的链接对卟啉分子的荧光波长和强度影响不大.