A Hairpin Electrochemical Aptasensor for Sensitive and Specific Detection of Thrombin Based on Homogenous Target Recognition

An electrochemical aptasensor was developed for sensitive and specific detection of thrombin by combining homogenous recognition strategy and gold nanoparticles (AuNPs) amplification. Streptavidin‐alkaline phosphatase was used as reporter molecule. Compared with the traditional hairpin aptasensor monitoring the distance of the redox molecule from the electrode surface, the proposed aptasensor successfully overcome the limitations of distance and improved the stability and high affinity of the aptamer hairpin through homogenous recognition, which enhanced the sensitivity and selectivity of the sensors effectively. Additionally, AuNPs were employed to increase the active area and conductivity of the electrode, thus, improving the sensitivity of the aptasensor. As a result, the designed thrombin detection sensor obtained a lower detection limit of 0.52 pM in buffer and 6.9 pM in blood serum.     

One-Pot Etherification of Ketones and Aldehydes with Organic Halides Using Sodium Hydride as a Reductant

One-pot etherification reaction of aromatic and some aliphatic carbonyl compounds with organic halides in the presence of sodium hydride as a reducing reagent proceeded smoothly in dioxane, a polar solvent with higher boiling point, to provide desired ethers in moderate to high yields.     

Octahedral CuII and NiII complexes manifesting with N′-[1-(pyridin-2-yl)ethylidene] acetohydrazide: Structural outlooks and spectral characteristics

A tridentate hydrazone precursor, N′-[1-(pyridin-2-yl)ethylidene]acetohydrazide (L) (1:1 refluxed product of acetichydrazide and 2-acetylpyridine), produced two octahedral Cu^II and Ni^II derivatives, [CuL₂]·NO₃ (1) and [NiL₂]·ClO₄·H₂O (2). Both are subjected to X-ray diffraction system, and structural investigation shows that the central metal atom (Cu^II or Ni^II) adopts a distorted octahedral geometry with N₄O₂ donor sets by coordination of a pair of independent hydrazone precursors. Besides X-ray study, IR and UV-vis spectra, thermal analysis and room temperature magnetic moments are utilized for establishing significant characteristics of both complexes. It is apparent that the M-N_pyridine bonds are slightly longer than the M-N_imino bonds, Cu1-N1 and Cu1-N4 [2.300(2) and 2.038(2) ?] for 1 and Ni1-N1 and Ni1-N4 [2.075(2) and 2.084(1) ?] for 2, Cu1-N2 and Cu1-N5 [2.062(1) and 1.932(1) ?] for 1 and Ni1-N2 and Ni1-N5 [2.008(2) and 1.975(2) ?] for 2, respectively. As per our observation, the effective magnetic moment value (μ_eff) is found to be 1.77 B.M. for 1 and 3.06 BM for 2, respectively.     

Highly Selective Photoelectroreduction of Carbon Dioxide to Ethanol over Graphene/Silicon Carbide Composites

Using sunlight to produce valuable chemicals and fuels from carbon dioxide (CO₂), i.e., artificial photosynthesis (AP) is a promising strategy to achieve solar energy storage and a negative carbon cycle. However, selective synthesis of C₂ compounds with a high CO₂ conversion rate remains challenging for current AP technologies. We performed CO₂ photoelectroreduction over a graphene/silicon carbide (SiC) catalyst under simulated solar irradiation with ethanol (C₂H₅OH) selectivity of>99 % and a CO₂ conversion rate of up to 17.1 mmol g_cat⁻¹ h⁻¹ with sustained performance. Experimental and theoretical investigations indicated an optimal interfacial layer to facilitate the transfer of photogenerated electrons from the SiC substrate to the few-layer graphene overlayer, which also favored an efficient CO₂ to C₂H₅OH conversion pathway.     

Structure determination and magnetic studies of triazole chelated Co(II) coordination polymers

Two cobalt(II) halide complexes with 1,2,4-triazole as a ligand were synthesized. Their structures were determined by extended x-ray absorption fine structure (EXAFS) and powder x-ray diffraction (XRD). Both complexes [Co(Htrz)Cl₂]_n ( 1 ) and {[Co(Htrz)₂(trz)]BF₄}_n ( 2 ) form one-dimensional polymeric chain and the distances of Co⋯Co are 3.3521(2) Å and 3.8629(2) Å, respectively. The Htrz and Cl⁻ are bridging ligands to connect two Co(II) ions in 1 , and the local environment of Co site is in a distorted octahedron with {CoN₂Cl₄} core. In complex 2 , two Htrz and one trz are bridging ligands to connect two Co(II) ions, and the local geometry of Co is in a pseudo octahedron with {CoN₆} core. The analysis of Co L_II,III-edge XAS indicates that the Co(II) of both complexes are at high spin state with t_2g⁵e_g² configuration and the crystal field strength (10Dq) is about 1.2 eV. The broken-symmetry DFT calculations indicate that antiferromagnetic coupling state of Co⋯Co is the most stable state in both complexes; and the coupling constants of 1 and 2 are −0.32 cm⁻¹ and −3.70 cm⁻¹, respectively. Based on the distances of Co⋯Co and coupling constants, such antiferromagnetic interaction is achieved through triazole ligands.     

Dynamically Resettable Electrode-Electrolyte Interface through Supramolecular Sol-Gel Transition Electrolyte for Flexible Zinc Batteries

Flexible batteries based on gel electrolytes with high safety are promising power solutions for wearable electronics but suffer from vulnerable electrode-electrolyte interfaces especially upon complex deformations, leading to irreversible capacity loss or even battery collapse. Here, a supramolecular sol-gel transition electrolyte (SGTE) that can dynamically accommodate deformations and repair electrode-electrolyte interfaces through its controllable rewetting at low temperatures is designed. Mediated by the micellization of polypropylene oxide blocks in Pluronic and host-guest interactions between α-cyclodextrin (α-CD) and polyethylene oxide blocks, the high ionic conductivity and compatibility with various salts of SGTE afford resettable electrode-electrolyte interfaces and thus constructions of a series of highly durable, flexible aqueous zinc batteries. The design of this novel gel electrolyte provides new insights for the development of flexible batteries.     

卤化物固态电解质研究进展

全固态电池因其高能量密度和高安全性而成为具有发展前景的下一代储能技术。开发具有高室温离子电导率、优异化学/电化学稳定性、良好正/负极兼容性的固态电解质是实现全固态电池实用化的关键。卤化物固态电解质因其优异的电化学窗口、高正极稳定性、可接受的室温锂离子电导率等优势,受到了广泛的关注。本文通过对近年来卤化物电解质的相关研究进行总结,综述了该类电解质的组成、结构、离子传导路径及制备方法,并分析了金属卤化物电解质的电导率、稳定性特点,归纳了近年来该电解质在全固态电池中具有代表性的应用,并基于以上总结和分析,指出了卤化物固态电解质的研究难点及发展方向。     

Braided Fiber Current Collectors for High-Energy-Density Fiber Lithium-Ion Batteries

Fiber lithium-ion batteries represent a promising power strategy for the rising wearable electronics. However, most fiber current collectors are solid with vastly increased weights of inactive materials and sluggish charge transport, thus resulting in low energy densities which have hindered the development of fiber lithium-ion batteries in the past decade. Here, a braided fiber current collector with multiple channels was prepared by multi-axial winding method to not only increase the mass fraction of active materials, but also to promote ion transport along fiber electrodes. In comparison to typical solid copper wires, the braided fiber current collector hosted 139 % graphite with only 1/3 mass. The fiber graphite anode with braided current collector delivered high specific capacity of 170 mAh g⁻¹ based on the overall electrode weight, which was 2 times higher than that of its counterpart solid copper wire. The resulting fiber battery showed high energy density of 62 Wh kg⁻¹.     

An unexpected generation of magnetically separable Se/Fe3O4 for catalytic degradation of polyene contaminants with molecular oxygen

Selenization of Fe₂O₃ with NaHSe led to Se/Fe₃O₄. The unexpected generation of Fe₃O₄ attributed to the reduction conditions of the reaction, and the resulted magnetic features of the material facilitated its separation in practical applications. Owning to the synergistic effect of Se with Fe, the material was especially active to catalyze the oxidative C=C scission using O₂ as mild oxidant. The technique has been successfully applied in polyene degradation project, which is of profound practical values for the treatment of the polyene pigment pollution and may be applied in the food and pharmaceutical industry.     

Synthesis and characterization of polyimides with ether linkages

Thermoplastic and thermoset polyimides derived from 2,2-bis[4-(4-aminophenoxy)phenyl]propane (BAPP) and 4,4′-bis(4-aminophenoxy)-2,2′-dimethylbiphenyl (BAPD) were prepared and characterized. Their physical and thermal properties as well as the polyelectrolyte effect exhibited by BTDA–BAPP polyamic acids in NMP solution were discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2559–2567, 1999