以最大原子密度定义合金相中的第一近邻团簇

本文提出利用不同壳层所包含的径向原子密度, 即单位体积内的原子个数随着径向的分布, 来方便而精确地定义团簇, 即具有最大径向原子密度的且表面呈现三角密堆结构的完整壳层为第一近邻团簇. 最后以Al-Ni-Zr合金相为例说明了该方法的合理性与适用性, 及此方法所定义的团簇与非晶形成的关系.     

Fabrication and analysis of ZnO thin film bulk acoustic resonators

This study employs RF magnetron sputter technique to deposit high C-axis preferred orientation ZnO thin film on silicon substrate, which is then used as the piezoelectric thin film for a thin film bulk acoustic resonator (FBAR). Electrical properties of the FBAR component were investigated by sputtering a ZnO thin film on various bottom electrode materials, as well as varying sputter power, sputter pressure, substrate temperature, argon and oxygen flow rate ratio, so that structural parameters of each layer were changed. The experimental results show that when sputter power is 200 W, sputter pressure is 10 mTorr, substrate temperature is 300 °C, and argon to oxygen ratio is 4:6, the ZnO thin film has high C-axis preferred orientation. The FBAR component made in this experiment show that different bottom electrode materials have great impact on components. In the experiment, the Pt bottom electrode resonant frequency was clearly lower than the Mo bottom electrode resonant frequency, because Pt has higher mass density and lower acoustic wave rate. The component resonant frequency will decrease as ZnO thin film thickness increases; when top electrode thickness is higher, its resonant frequency also drops, due to top electrode mass loading effect and increased acoustic wave path. Therefore, ZnO thin film and top/bottom electrode thickness can be fine-tuned according to the required resonant frequency.     

Ti-Zr-Ni单相准晶合金的室温力学性能研究

以Ti40₄₀Zr40₄₀Ni20₂₀合金为研究对象，用铜 模吸铸法制备出直径为3mm的致密单相准晶棒，通过维氏显微硬度测定和单向压缩实验方 法研究了该合金的室温力学性能 .结果表明：Ti40₄₀Zr40₄₀Ni20₂₀准晶具有良好 的弹性变形能力，室温弹性应 变可达125%.同时，它具有相对高的室温硬度（约55GPa），是普通Ti合金的15倍.T i40_{40 关键词： 准晶 Ti-Zr-Ni合金 解理断裂}     

State transitions and the continuum limit for a 2D interacting, self-propelled particle system

We study a class of swarming problems wherein particles evolve dynamically via pairwise interaction potentials and a velocity selection mechanism. We find that the swarming system undergoes various changes of state as a function of the self-propulsion and interaction potential parameters. In this paper, we utilize a procedure which connects a class of individual-based models to their continuum formulations and determine criteria for the validity of the latter. H-stability of the interaction potential plays a fundamental role in determining both the validity of the continuum approximation and the nature of the aggregation state transitions. We perform a linear stability analysis of the continuum model and compare the results to the simulations of the individual-based one.     

微尺度型腔内液态金属流动规律模拟研究

修正了传统的Navier-Stoke方程,并利用修正后的方程与Fluent软件对微尺度型腔内Zn-Al合金微流动规律进行了数值模拟.模拟结果表明：液态金属在微尺度管道内的流动规律在管径为0.5mm时出现临界状态,管径越细,速度附面层相对厚度就越大.同时,微管流动存在着宏观流动中没有的“凸进效应”,且随着入口压力增大,流动前沿自由液面的凸进效应减弱.在流动前沿区域和上游区域之间出现负压力梯度区,且管径越细越明显. 关键词： 微管道 微流动 Zn-Al合金     

Terahertz electromagnetic radiation from quantum wells

The observation of terahertz electromagnetic dipole radiation from quantum well structures has finally proven the existence of charge oscillations in semiconductors associated with wave packet dynamics. This article closely examines the physics behind the emission of terahertz electromagnetic radiation from excitonic charge oscillations in such quantum well structures, points out similarities and differences between the various generation schemes, and discusses the various relaxation mechanisms involved. Finally, we show how both amplitude and phase of charge oscillations and the corresponding terahertz emission can be manipulated using phase-locked optical pulses.     

Image watermarking by using phase retrieval algorithm in gyrator transform domain

We propose an image watermarking scheme based on the phase retrieval algorithm in gyrator domain. The watermark is converted into a noise-like image by Arnold transform. The scrambled image is regarded as the amplitude of gyrator spectrum. The Gerchberg-Saxton algorithm is employed to obtain the unknown phase function in gyrator pair, in which the host image is the amplitude of input function. The phase information and the parameters of the two transforms serve as the key of watermarking algorithm. The numerical simulation has demonstrated the performance of the proposed algorithm.     

Effects of Carrier Gas on Carbon Incorporation in GaN

GaN epitaxial layers were grown on Si （111） substrates by metal organic chemical vapor deposition. Carbon concentrations in the films grown in different ambients were measured by secondary ion mass spectrometry. The results show that the carbon incorporation is strongly dependent on the H2 flow rate when the NH3 flow rate is small, but insensitive to the H2 flow rate when the NH3 flow rate is sufficient large. We conclude that H2 can inhibit the dissociation of NH3 and result in a less active N source; an insufficiently active N source causes more N vacancies, which enhances carbon incorporation.     

ZnS Nanospheres for Optical Modulator in an Erbium-Doped Fiber Laser

Zinc sulfide (ZnS), which belongs to transition metal monochalcogenides, is a semiconductor material with wide direct band gap. It can potentially show some special applications (such as luminescence, phosphor, sensors, infrared window materials, photocatalysis) by changing the morphology, size, and crystal structure of semiconductor materials. However, ZnS nanospheres have not been studied as optical modulators until now. Herein, ZnS nanospheres are synthesized by the hydrothermal method and are used to realize optical modulators in an Er-doped fiber laser. The evanescent field effect is utilized to incorporate the ZnS nanospheres on a tapered fiber. Furthermore, with the increase in pump power, the modulation interval gradually decreases to a minimum of 34.36 ns corresponding to the modulation frequency of 29.1 MHz, which is the highest modulation frequency to our knowledge in a ring cavity all-fiber laser. These results demonstrate ZnS nanospheres together with the interaction of dispersion and nonlinearity in optical fibers can modulate the proposed lasers. This not only provides a new method for controlling the power and frequency of all optical modulators, but also marks an important step for ZnS materials in optics research and device applications.