Synthesis, characterization, and reactivity of half-sandwich Ru(II) complexes containing phosphine, arsine, stibine, and bismutine ligands

The synthesis and some reactions of the Ru(II) and Ru(IV) half-sandwich complexes [RuCp(EPh₃)(CH₃CN)₂]⁺ (E=P, As, Sb, Bi) and [RuCp(EPh₃)(η³-C₃H₅)Br]⁺ have been investigated. The chemistry of this class of compounds is characterized by a competitive coordination of EPh₃ either via a RuE or a η⁶-arene bond, where the latter is favored when the former is weaker, that is in going down the series. Thus in the case of Bi, the starting material [RuCp(CH₃CN)₃]⁺ does not react with BiPh₃ to give [RuCp(BiPh₃)(CH₃CN)₂]⁺ but instead gives only the η⁶-arene species [RuCp(η⁶-PhBiPh₂)]⁺ and [(RuCp)₂(μ-η⁶,η⁶-Ph₂BiPh)]²⁺. Similarly, the EPh₃ ligand can be replaced by an aromatic solvent or an arene substrate. Thus, the catalytic performance of [RuCp(EPh₃)(CH₃CN)₂]⁺ for the isomerization of allyl-phenyl ethers to the corresponding 1-propenyl ethers is best with E=P, while the conversion drops significantly using the As and Sb derivatives. By the same token, only [RuCp(PPh₃)(CH₃CN)₂]⁺ is stable in a non-aromatic solvent, whereas both [RuCp(AsPh₃)(CH₃CN)₂]⁺ and [RuCp(SbPh₃)(CH₃CN)₂]⁺ rearrange upon warming to [RuCp(η⁶-PhEPh₂)]⁺ and related compounds. In addition, the potential of [RuCp(EPh₃)(CH₃CN)₂]⁺ as precatalysts for the transfer hydrogenation of acetophenone and cyclohexanone has been investigated. Again aromatic substrates are clearly less suited than non-aromatic ones due to facile η⁶-arene coordination leading to catalyst's deactivation.     

Coupling reactions of alpha-(N-carbamoyl)alkylcuprates with enol triflates derived from cyclic beta-keto esters: A facile approach to gamma-carbamoyl-alpha,beta-enoates

alpha-(N-Carbamoylalkyl)cuprates couple with enol triflates derived from carbocyclic and heterocyclic (i.e., piperidinones) beta-keto esters. Product yields are higher with the alkyl(cyano)cuprates [i.e., RCu(CN)Li, 56-93%] than with the dialkylcuprate reagents (i.e., R(2)CuLi.LiCN). An enol nonaflate works as well as the corresponding enol triflate. A facile synthetic route to gamma-amino alpha,beta-enoates not readily prepared from gamma-keto-alpha,beta-enoates is thus established. The gamma-amino-alpha,beta-enoates, available via N-Boc deprotection, can be cyclized to annulated pyrrolin-2-ones.     

Mixtures of lattice polymers with structured monomers

The influence of monomer structure on the thermodynamic properties of lattice model polymer blends is investigated through Monte Carlo computations. The model of lattice polymers with monomer structure has been used extensively in the context of the lattice cluster theory (LCT), a thermodynamic theory for polymer mixtures in the liquid state. The Monte Carlo computations provide the first unequivocal test of the accuracy of the LCT predictions for binary mixtures of polymers with structured monomers. Four types of monomer structures are analyzed, corresponding to to the monomers of polyethylene, polypropylene, polyethylethylene, and polyisobutylene (PIB). Most computations use chains with M=12 and 24 beads and the total volume fraction of the beads is phi=0.6. Both structurally symmetric and asymmetric blends are investigated. For the symmetric case, the predictions of the LCT for the energies of mixing and the liquid-liquid coexistence curves are in qualitative agreement with the Monte Carlo computations, except for the PIB/PIB symmetric blend. For structurally asymmetric blends, the LCT does not capture contributions to the energy of mixing arising solely from structural differences between the components. Computational estimates of the nonideal entropy of mixing indicate that the LCT also underestimates the entropic cost of mixing chains with different structures, thus explaining some discrepancies between the theoretical and the Monte Carlo liquid--liquid coexistence curves.     

Synthesis of non-k-region ortho-quinones of polycyclic aromatic hydrocarbons from cyclic ketones

Non-K-region $\text{o}$-quinones of polycyclic aromatic hydrocarbons are prepared in four steps from cyclic ketones via dehydrogenation of tetrahydrodiols with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone.     

Zum Mechanismus der nucleophilen Addition an 2,3-Dihydrodipyrrin-1(10H)-one

¹H NMR-spectroscopic investigations of the acid catalyzed addition of methanol to dihydrodipyrrinones (Z)-2, (E)-2, and4 show the C-protonation of their enamide parts to be the first and rate determining step forming the key intermediate, the N-acyl-immonium ion N⁺. Its ability to add nucleophiles diastereoselectively can be used to prepare the adductsl-3 andl-5. Exclusive formation of thelike-isomer can be explained by a stereoelectronically favoured approach of the nucleophile and by the thermodynamically favoured arrangement of the bulky ring substituents. Both explanations are based on low temperature X-ray crystal structure determinations: in the first place, the orientation of the added nucleophile could be found to be nearly parallel to the -plane of the lactam unit and quasi-axial with respect to theenvelope-like conformation of the five-ring lactam; in the second place, the relative orientation of the methoxycarbonyl-metyl-group at C-3 and the pyrrolylmethyl-substituent at C-4 could be found to be atrans-quasi-diequatorial one.

     

Electronic states and nature of the chemical bond in the molecule CrC by all-electron ab initio calculations

All-electron ab initio Hartree–Fock (HF ), valence configuration interaction (CI ), and multiconfiguration self-consistent-field (CASSCF ) calculations have been applied to investigate the electronic states of the CrC molecule. The molecule is predicted as having four low-lying electronic states, ³∑^?, ⁵∑^?, ⁷∑^?, and ⁹∑^?, separated by an energy gap of 0.55 eV from the next higher-lying state, ¹∑^?, which is followed by the states ⁵Π and ⁷Π. The four lowest-lying electronic states are due to the coupling of the angular momenta of the ⁶S_g Cr⁺ ion with those of the ⁴S_u C^? anion. The chemical bond in the ³∑^? ground state can be viewed as a quadruple bond composed of two σ and two π bonds. One σ bond is due to the formation of a molecular orbital that is doubly occupied. The remaining bonds, i.e., one σ and two π bonds, arise from valence-bond couplings. The π bonds originate from the valence-bond couplings of the electrons in the C 2pπ orbitals with those in the Cr 3dπ orbitals. The σ bond originates from the valence-bond coupling of the C 2pσ electron with an electron in the Cr 4s, 4p hybrid that is polarized away from the C atom.     

On-line coupling of sequential injection extraction with restricted-access materials for sample clean-up and analysis of drugs in biological matrix

In this contribution, the on-line coupling of solid phase extraction (SPE), based on a restricted-access material (RAM), with sequential injection technique (SIA) for the analysis of biological samples, is described. The SIA-RAM system was tested with a new potential antileucotrienic drug (VUFB-19363 (Quinlukast)) for serum analysis. The method is based on SPE with the novel internal-surface reversed-phase column packing material-alkyl-diol silica (ADS). The supports tolerate direct and repetitive injection of proteinaceous fluids (plasma, serum) and allow reversed-phase partitioning at the internal surface. A column packed with a 25 microm C18 alkyl-diol support was used for direct serum injection. Using a 6-port selection valve and the system of three mobile phases, the polar matrix compounds and metabolites are removed by sequentially aspirated mobile phases with lower content of the organic part (methanol-water (2:98) and following acetonitrile-water (20:80)) to the waste, and then, the analyte enriched on the column is eluted by a strong mobile phase (acetonitrile-methanol-water (40:20:40)) to the UV detector without transfer loss. With the fully automated SIA system, a total analysis time of less than 10 min was achieved. The only off-line sample pre-treatment step required to remove particulate matter was centrifugation. The studies showed a range of linearity (2-40 microg ml(-1)) and a high recovery (93.6-96.8%) of drug from the biological matrix with coefficients of variation (RSD) less than 5.0% (n = 6). This paper introduces a new, simple and robust analytical technique suitable for screening determination and direct analysis of drugs in biological materials.     

Diastereoselective Spirocyclization of C-(Alkyloxycarbonyl)formimines of 2-Substituted 1HIndole-3-ethanamines (= Tryptamines): Basic Studies. 5th Communication on Indoles,Indolenines, and Indolines

C-(Alkoxycarbonyl)formimines of type 15–18 were derived from the 2-substituted tryptamines 2 , 9 , 10 , and 11 and transformed with tosyl chloride into tricyclic 3-spiroindoles of types 19–22 (Scheme 3). The influence of the homochiral alkoxy moieties A–D on the stereochemical outcome of this reaction was studied. Good-to-excellent diastereoselectivities were observed with the (?)-8-(phenylmenth-3-yl)oxy group ( B ) as homochiral auxiliary. The structures of the tricycles 4 , (2′R,3S)- 19B , and (2′S,3R) 20C were established by X-ray analysis, the structures of the others by NOE and CD studies, and by chemical correlation. Possibilities to explain the steric course of the spirocyclizations are discussed.     

Synthesis of a simplified bryostatin C-ring analogue that binds to the CRD2 of human PKC-alpha and construction of a novel BC-analogue by an unusual Julia olefination process

[structure: see text] The synthesis of two truncated bryostatin analogues 2 and 3 is described. High-field NMR measurements on the C-ring analogue 3 in C(2)H(3)CN containing 25% (2)H(2)O have shown that it binds to the CRD2 of human PKC-alpha at virtually the same position as phorbol-13-acetate (PA) and bryostatin 1 (1). NMR titration studies have also revealed that 3 binds to the CRD2 with a potency similar in magnitude to PA but much less potently than 1.     

Beitr?ge zur Bestimmung von Spurenverunreinigungen in UO2-Kernbrennstoff

Zusammenfassung Die für die Bestimmung geringer Gehalte an Phosphor, Silicium, Fluor, Chlor, Lithium, Natrium, Calcium und Kohlenstoff in UO₂-Kernbrennstoff angewandten chemischen Analysenverfahren werden beschrieben. Durch Kombination einfacher und blindwertfreier Abtrennungsverfahren (Extraktionen und Pyrohydrolysen) mit empfindlichen physikalischchemischen Bestimmungsmethoden (Spektralphotometrie, Flammenphotometrie, coulometrische Titration) lassen sich Nachweisgrenzen zwischen 0,1 und 10 ppm bei Probeneinwaage von 0,5–1 g UO₂ erreichen. Der Zeitaufwand für die Analysen kann durch simultane Bestimmung zweier oder dreier Elemente in einem Arbeitsgang niedriggehalten werden. Die beschriebenen Verfahren haben sich bei Reinheitskontrollen von Kernbrennstoffen gut bewährt.

---

Summary Analytical methods have been developed for the determination of trace amounts of phosphorus, silicon, fluorine, chlorine, lithium, sodium, calcium, and carbon in UO₂ of nuclear purity. By combination of simple and rapid separation procedures (extraction, pyrohydrolysis) with highly sensitive methods of determination (spectrophotometry, flame photometry, coulometric titration) detection limits of 0.1–10 ppm have been obtained with sample sizes of 0.5–1 g. In order to reduce the time needed for analysis, some of the above elements are determined simultaneously. The methods described have been successfully applied to the purity control of nuclear fuels.

---

---

Herrn Dr. W. Gebauhr danken wir für wertvolle Anregungen und Diskussionen.