A novel hexairon cluster with one disulfide and two Ph2PCS3− ligands

The title compound, hexadecacarbonylbis{μ₃‐[(diphenylphosphanyl)methanediidyl]sulfanido}‐μ₄‐disulfido(2−)‐hexairon(4 Fe—Fe), [Fe₆(C₁₃H₁₀PS)₂(S₂)(CO)₁₆], contains two inversion‐related [Fe₃(Ph₂PCS)(CO)₈] subclusters linked by an equatorial disulfide bond [S—S = 2.1490 (9) Å]. Each Ph₂PCS³⁻ ligand is coordinated to a triiron core in a μ₃‐κP:κ²C:κ²S fashion.     

A tubular one‐dimensional polymer constructed from alternating clusters of europium(III)–water and copper(I) chloride bridged by 4‐(pyridin‐4‐yl)benzoate

A new 3d–4f heterometallic polymer, poly[[aqua‐μ₃‐chlorido‐[μ₃‐4‐(pyridin‐4‐yl)benzoato]tris[μ₂‐4‐(pyridin‐4‐yl)benzoato]dicopper(I)erbium(III)] dihydrate], {[Cu₂Er(C₁₂H₈NO₂)₄Cl(H₂O)]·2H₂O}_n, was synthesized by the hydrothermal reaction of Er₂O₃, CuCl₂·2H₂O and 4‐(pyridin‐4‐yl)benzoic acid in the presence of HClO₄. The asymmetric unit contains one Er³⁺ cation, two Cu⁺ cations, one Cl⁻ anion, four deprotonated 4‐(pyridin‐4‐yl)benzoate ligands, one coordinated aqua ligand and two solvent water molecules. This tubular one‐dimensional polymer is constructed from alternating clusters of europium(III)–water and copper(I) chloride bridged by 4‐(pyridin‐4‐yl)benzoate ligands. Extensive hydrogen‐bonding interactions involving both the coordinated and the solvent water molecules provide further stabilization to the structure.     

Trimetallic Au@PdPt core-shell nanoparticles with ultrathin PdPt skin as highly stable electrocatalysts for the oxygen reduction reaction in acid solution

To design efficient and low-cost core-shell electrocatalysts with an ultrathin platinum shell, the balance between platinum dosage and durability in acid solution is of great importance. In the present work, trimetallic Au@PdPt core-shell nanoparticles(NPs)with Pd/Pt molar ratios ranging from 0.31:1 to 4.20:1 were synthesized based on the Au catalytic reduction strategy and the subsequent metallic replacement reaction. When the Pd/Pt molar ratio is 1.19:1(designated as Au@Pd_(1.19) Pt_1 NPs), the superior electrochemical activity and stability were achieved for oxygen reduction reaction(ORR) in acid solution. Especially, the specific and mass activities of Au@Pd_(1.19) Pt_1 NPs are 1.31 and 6.09 times higher than those of commercial Pt/C catalyst. In addition, the Au@Pd_(1.19) Pt_1 NPs presented a good durability in acid solution. After 3000 potential cycles between 0.1 and 0.7 V(vs. Ag/AgCl), the oxygen reduction activity is almost unchanged. This study provides a simple strategy to synthesize highperformance trimetallic ORR electrocatalyst for fuel cells.     

离子色谱法测定甲醇和噻吩中硫、氯含量

建立了测定工业用甲醇和噻吩中硫、氯含量的离子色谱检测方法。样品经(700±25)℃灼烧后,残留物用蒸馏水洗涤,利用离子色谱仪进行分析。甲醇和噻吩中硫、氯检测结果的相对标准偏差为1.04%~1.26%,加标回收率为99.2%~101.2%。该方法操作简单,精密度和准确度高,可用于大部分可燃性有机化合物中硫、氯含量的检测。     

Hydrothermal synthesis, crystal structure, and photoluminescence of Pb(II) and Mn(II) coordination polymers based on imidazo[4,5-f][1,10]phenanthroline

Two new coordination polymers, [Pb(IDPT)₂(NO₃)₂] (I) and [Mn(IDPT)(SO₄)(H₂O)₂] (II) (IDPT = imidazo[4,5-f][1,10]phenanthroline), were synthesized by hydrothermal method and characterized by elemental analysis and single-crystal X-ray diffraction technique. The results reveal that the complex I belongs to monoclinic crystal system, space group C2/c and complex II belongs to monoclinic crystal system, P2₁/c space group. The cell parameters are: a = 19.1970(13), b = 7.3875(5), c = 17.3825(12) Å, β = 100.47(10)°, V = 2424.0(3) ų, Z = 4, F(000) = 1488 for I; a = 10.9135(6), b = 7.0230(4), c = 19.7034(10) Å, β = 99.32(10)°, V = 1490.25(14) ų, Z = 4, F(000) = 828 for II. In the structure of complex I, the metal center Pb(II) is six-coordinated, displays an octahedral geometry. Each molecule is further connected with neighboring one via π-π interactions into 1D chain. In complex II, Mn(II) is six-coordinated to form a distorted octahedral geometry. Compound II displays 1D supramolecular chain formed through hydrogen bonds. Additionally, the fluorescent properties for the complexes were investigated. Complexes I and II exhibit strong photoluminescence with emission maximum at 583 and 529 nm at room temperature.     

新型Gemini咪唑表面活性剂的合成及表面性能

以2,2-双(溴甲基)-1,3-丙二醇为连接基合成了新型的连接基为枝状的Gemini咪唑表面活性剂2,4-二(溴化-3-烷基咪唑)-1,3-丙二醇([Cn-P-Cnim]Br2,n=10,12,14).产物经核磁共振氢谱(1H NMR)、红外(IR)光谱和元素分析等进行了分析,证明所得产物即为目标产物.通过表面张力法和电导法测量其表面活性并计算胶束形成热力学参数(ΔG m—0,ΔH m—0,ΔS m—0).结果表明,25℃时3种表面活性剂均具有很高的表面活性,胶束的形成是自发的熵驱动过程.     

Li+掺杂对Y2SiO5:Pr3+上转换发光性能影响

采用溶胶-凝胶法制备Li+掺杂改性的Y2SiO5:Pr3+上转换发光材料,考察了Li+掺杂对样品晶型及发光性能的影响。采用XRD,DSC-TGA,FS对所制备的材料进行表征,结果表明Li+掺入浓度在7%～8%(摩尔分数)之间会引起Y2SiO5晶体类型由X1型转变为X2型,且Li+掺入后样品转晶型温度由950℃降至800℃;样品经800℃煅烧处理后以X1型Y2SiO5为主相,850℃煅烧处理后以X2型Y2SiO5为主相;Li+掺入同时会提高Y2SiO5:Pr3+材料的上转换发光强度,Li+最佳掺杂浓度为10%,对于双掺杂Pr3+,Li+:Y2SiO5体系中Pr3+最佳掺杂浓度为1.2%。     

Eu（TTA）3AA-NBR/PVP同轴超细纤维的制备及荧光性能研究

用同轴静电纺丝制备了含有稀土铕配合物(Eu(TTA)3AA)的芯-壳结构的丁腈橡胶/聚乙烯吡咯烷酮(NBR/PVP)超细荧光纤维。考察了在外层PVP纺丝参数不变的情况下,改变芯层丁腈橡胶纺丝液的纺丝速度、Eu(TTA)3AA含量等对纤维形貌的影响。通过研究Eu(TTA)3AA-NBR/PVP同轴超细纤维中Eu(TTA)3AA微观结构、含量与纤维的荧光性能之间的关系,发现在同轴纤维形成过程中由于溶剂的快速挥发可使Eu(TTA)3AA形成无定形结构,进而在纤维中形成分子簇级别的分散,在Eu(TTA)3AA含量为30%时,同轴纤维比Eu(TTA)3AA粉末的荧光强度提高了2倍。