新颖的高功率L-波段掺铒光纤超荧光光源

研究了L-波段超荧光在光纤中的产生机理,设计了一种带光纤圈反射器的双级双程前向输出L-波段光源结构,通过对两级采用掺铒浓度不同的光纤并优化其长度及两级泵浦光功率,实验中获得了功率高达19.86mW(12.98dBm)、中心波长为1577.421nm的L-波段(1555-1620nm)超荧光光源。实现了低浓度掺铒光纤起诱导光及改善光谱的作用,高浓度光纤为主要发光源,采用光纤圈反射器提高了泵浦光的利用效率、光源的平坦度及稳定性。同时分析了结构中各个参量对光源各方面性能的影响,对光源的设计具有指导意义。     

黎开管热声振荡的主动控制研究

本文以黎开管内的热声耦合振荡为研究对象,设计基于主动补偿的适应性控制器抑制黎开管内的不稳定燃烧。试验以扬声器为执行机构来改变黎开管的边界条件,从而抑制黎开管内的热声耦合振荡。实时控制效果表明,本文所采用的适应性控制算法能够有效抑制因热声耦合产生的燃烧振荡,为实际动力系统燃烧振荡抑制提供了思路。     

Output nonlocality and nonclassicality in a two-mode entanglement laser

Output nonlocality and nonclassicality for the two modes are investigated in an entanglement laser sys-tem. Within the framework of a quantum theory of multiwave mixing,nonlocality and nonclassicality are discussed according to the violations of Bell inequality and Cauchy-Schwarz inequality. It is found that both nonlocality and nonclassicality can be fulfilled in the outside cavity fields under certain conditions. It is also shown that there are some nonclassical states that do not show nonlocality.     

Studies on the mechanisms of powerful terahertz radiations from laser plasmas

A survey on the mechanisms of powerful terahertz (THz) radiation from laser plasmas is presented.Firstly,an analytical model is described,showing that a transverse net current formed in a plasma can be converted into THz radiations at the plasma oscillation frequency.This theory is applied to explain THz generation in a gas driven by two-color laser pulses.It is also applied to THz generation in a tenuous plasma driven by a chirped laser pulse,a few-cycle laser pulse,a DC/AC bias electric field.These are well verified by particle-in-cell simulations,demonstrating that THz radiations produced in these approaches are nearly single-cycles and linear polarized.In the chirped laser scheme and the few-cycle laser scheme,THz radiations with the peak field strength of tens of MV/cm and the peak power of gigawatt can be achieved with the incident laser intensity less than 10 17 W/cm 2.     

绝对编码光栅的相位细分及其在位移测量中的应用

提出通过光栅条纹相位的精密测量,获取光栅高精度位移信息的方法。具体方法是对光栅图像采用多码道设计,用CCD二维图像传感器获取测量段光栅图像多码道信息。对最低码道图形的周期函数序列进行傅里叶变换、基频滤波和逆傅里叶变换获得光栅截断相位分布,其余码道信息提供相位展开的级次,以此获得测量段光栅的绝对相位分布。用光刻的手段制作了实用的绝对编码光栅,基元码道的尺寸是:27.36μm用于明条纹,27.36μm用于暗条纹,最小基元码道空间周期为54.72μm,光栅长度为14008.32μm。在步长近似3μm的位移测试中,与比对的标准仪器记录值比较,标准偏差为0.2057μm,精度在亚微米量级。重复性实验表明,位置测试的稳定性为0.09μm(标准差),得到600倍以上细分的分辨力。     

纠缠相干态的纠缠浓缩

利用线性光学元器件对光场量子态进行操纵,可以实现远程的量子纠缠调控和量子通讯.通过分析光学分束器对相干态光场的作用,发现当初始光场态是两个两部分纠缠态的直乘时,让其中的两模通过光学分束器作用后再对其进行光子计数,另外两模将会塌缩到新的纠缠态.基于这个特点,提出了一个实现部分纠缠相干态纠缠浓缩的方案.在这个方案中,两个部...     

A low-threshold and high-power oxide-confined 850-nm AlInGaAs strained quantum-well vertical-cavity surface-emitting laser

A low-threshold and high-power oxide-confined 850-nm AlInGaAs strained quantum-well (QW) vertical-cavity surface-emitting laser (VCSEL) based on an intra-cavity contacted structure is fabricated. A threshold current of 1.5 mA for a 22 μm oxide aperture device is achieved, which corresponds to a threshold current density of 0.395 kA/cm². The peak output optical power reaches 17.5 mW at an injection current of 30 mA at room temperature under pulsed operation. While under continuous-wave (CW) operation, the maximum power attains 10.5 mW. Such a device demonstrates a high characteristic temperature of 327 K within a temperature range from -12℃ to 96℃ and good reliability under a lifetime test. There is almost no decrease of the optical power when the device operates at a current of 5 mA at room temperature under the CW injection current.     

MgB2薄膜的制备与特殊性质

本文报道了利用混合物理化学气相沉积方法(HPCVD)在SiC衬底上制备出约150 nm厚,结构均匀的MgB2薄膜.由R~T曲线知道样品TC(0)高达40.1K.由M~T曲线知道其TC=40.4K,且曲线转变十分陡峭.X射线衍射分析表明薄膜具有较好的C轴取向,没有氧污染,却存在Mg的杂峰.由M~H曲线,利用毕恩模型计算得到了5 K零场条件下JC(0T,5K)=2.7×106A/cm2,Hc2=19.5 T.这些结果表明过量的Mg对MgB2薄膜的转变温度以及有些性质有较大的影响.     

Multi-modal calculations of prompt fission neutrons from 238U（n,f） at low induced energy

Properties of prompt fission neutrons from ²³⁸U(n, f) are calculated for incident neutron energies below 6 MeV using the multi-modal model, including the prompt fission neutron spectrum, the average prompt fission neutron multiplicity, and the prompt fission neutron multiplicity as a function of the fission fragment mass υ(A) (usually named “sawtooth” data) The three most dominant fission modes are taken into account. The model parameters are determined on the basis of experimental fission fragment data. The predicted results are in good agreement with the experimental data.     

A novel simulation method to evaluate the collection performance of a monolithic active pixel sensor

A novel simulation method is presented in this paper to evaluate the collection performance of monolithic active pixel sensor (MAPS) devices for minimum ionizing particle tracking. A simplified 3D matrix pixel structure is built using the computer aided design software Sentaurus. The virtual device is then divided into hundreds of parts and an independent customized X photon model is involved in each part to simulate the conditions under ⁵⁵Fe radiation. After data processing and analysis, charge collection efficiency, collection time and diffusion conditions can be estimated in detail. In order to verify the reliability of the method, comparisons are made between the simulations and experiments. Although there are some defects, it can be concluded that the proposed idea is a feasible method for the evaluation of the MAPS collection performance.