Chaotic oscillations associated with the breakup of polarization entangled coherent states in a microchip solid-state laser

We demonstrate the breakup of spatial-polarization entangled lasing patterns, which possess vector phase singularities, and the resultant dynamic instabilities featuring chaotic oscillations. The frequency splitting between a pair of Ince-Gauss (IG) lasing modes, originally forming a coherent entanglement state, and a self-excited additional nonorthogonal IG mode through a new class of transverse effect of self-injection pattern seeding, is shown to result in modal-interference-induced modulation at the beat frequency, leading to chaotic oscillations.     

Reaction mechanism studies for platinum nanoparticle growth by atomic layer deposition

Mass spectrometry is used to study the reaction mechanism of platinum (Pt) atomic layer deposition (ALD) on large quantities of high surface area silica gel particles in a fluidized bed reactor. (Methylcyclopentadienyl)trimethylplatinum [(MeCp)PtMe₃] and oxygen are used as precursors. Studies are conducted at a substrate temperature of 320 °C. The self-limiting behavior of ALD appears to be disrupted with overexposure of Pt precursor. The amount of the deposited Pt and the size of the Pt nanoparticles increase with an increasing overdose time of Pt precursor. This can be explained by the thermal decomposition of Pt precursor at the reaction temperature of 320 °C and the in situ sintering of Pt nanoparticles forming larger particles. This finding is significant and its understanding is essential for better control of Pt deposition to achieve desirable morphological and structural properties for different application requirements.     

Size effect of two-dimensional thermal radiation

Properties of two-dimensional thermal radiation are investigated as a function of sample size and temperature. The two-dimensional thermal radiation is different from two-dimensional blackbody radiation when the size of the sample becomes small due to the uncertainty principle, which shows the allowed minimum energy can?t be neglected. The energy density is shown as a function of sample size at a constant temperature. The energy density is also shown as a function of temperature at a constant size. It is shown that our prediction can be measured from the thermal radiation of graphene.     

Ab initio studies on the electronic structure of CeSi5

We investigated the electronic properties of CeSi₅ by band structure calculation based on the density functional theory within LDA, LDA+U, and fully relativistic schemes. The calculated band structure scheme shows that the spin-orbit coupling splits the Ce 4f states into three manifolds. When the on-site Coulomb potential is added to the Ce-derived 4f orbitals, the degeneracy between the f orbitals would be lifted and they are split into lower Hubbard bands and upper Hubbard bands. It was found that quasiparticle mass enhancement inferred by comparing γ to the density of states (DOS) at the Fermi level indicates the effective mass of CeSi₅ is enhanced with the fully relativistic results.     

Synthesis and characterization of Ag-doped p-type ZnO nanowires

P-type ZnO nanowires with silver (Ag) doping were synthesized via a chemical vapor deposition process. The incorporation of Ag was confirmed by selected-area energy-dispersive x-ray spectroscopy. The formation of acceptor states was demonstrated by temperature and excitation power-dependent photoluminescence measurements. Characterization of field-effect transistors using Ag-doped ZnO nanowires as channels showed p-type conductivity of the nanowires with a hole concentration of 4.9×10¹⁷ cm⁻³ and a carrier mobility of approximately 0.18 cm² V⁻¹ s⁻¹.     

Growth of Fe on Ge(1 1 1) at room temperature studied by X-ray photoelectron diffraction

The growth of ultrathin Fe films of various coverages on Ge(1 1 1) at room temperature using molecular beam epitaxy (MBE) was studied via X-ray photoelectron diffraction (XPD or XPED) together with low energy electron diffraction (LEED) and X-ray photoelectron spectroscopy (XPS). All experimentally observed XPD patterns suggested local order structures of the Fe layers for all thicknesses studied. The short-range order of the resulting structures was found to be enhanced for thinner layers whereas the long-range order was gradually lost with increasing Fe thicknesses. At a very low coverage of 0.8 Å Fe and Ge tend to react to the partly ordered structure in which Fe atoms were located in local environments similar to those for higher Fe coverages. Comparison of theoretical and experimental XPD patterns, along with XPS results, showed that intermixing between Fe and Ge occurred during the pseudomorphic growth with a stacking fault near the interface for all Fe coverages under study. Nevertheless, small percentage of domains without the stacking fault was also found to coexist with those with the stacking fault by performing a quantitative analysis of a reliability factor R of the Fe2p pattern for 5.4 Å. The orientation changes of the Ge2p and Ge3d XPD patterns with Fe thickness were unambiguously explained in terms of their different dependencies on the overlayer thickness due to the different inelastic mean free path lengths used in the simulations. Also, Fe got increasingly enriched in the grown layers with increased Fe coverage. The resulting structures and intermixing are discussed in detail.     

Effects of water plasma immersion ion implantation on surface electrochemical behavior of NiTi shape memory alloys in simulated body fluids

Water plasma immersion ion implantation (PIII) was conducted on orthopedic NiTi shape memory alloy to enhance the surface electrochemical characteristics. The surface composition of the NiTi alloy before and after H₂O-PIII was determined by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) was utilized to determine the roughness and morphology of the NiTi samples. Potentiodynamic polarization tests and electrochemical impedance spectroscopy (EIS) were carried out to investigate the surface electrochemical behavior of the control and H₂O-PIII NiTi samples in simulated body fluids (SBF) at 37 °C as well as the mechanism. The H₂O-PIII NiTi sample showed a higher breakdown potential (E_b) than the control sample. Based on the AFM results, two different physical models with related equivalent electrical circuits were obtained to fit the EIS data and explain the surface electrochemical behavior of NiTi in SBF. The simulation results demonstrate that the higher resistance of the oxide layer produced by H₂O-PIII is primarily responsible for the improvement in the surface corrosion resistance.     

双喷嘴乳粒发生器的研制及初步应用

 叙述了双喷嘴乳粒发生器的工作原理、设计关键点及设计思路,利用该发生器开展了双层乳粒的制备实验研究工作。研制的双喷嘴乳粒发生器在喷嘴处的3层管的位置能够通过简单调节达到同心,使得双层乳粒包覆的可靠性得到提高。研究了制备的乳粒的分散性和稳定性,并分析了形成双层乳粒的油相和水相的流速比,结果证明：利用所研制的双喷嘴乳粒发生器可以容易地制备出单分散性双层乳粒,油相与水相的流速比为0.3~15.0时,可形成双层乳粒。     

Application of computer vision and laser interferometer to the inspection of line scale

In the paper machine vision, laser interferometer and coordinate measuring machine (CMM) are combined to develop a vision inspection system. The measurement capability of the developed system is investigated by measuring the distances between the lines on a standard line scale. The vision camera is used to replace the probe of the CMM to take the images of the interested lines on a line scale at two different positions. Meanwhile, the displacement of the CCD camera is measured using laser interferometer. Using subpixel edge localization and outlier-excluding least-squares regression, the distance between two interested lines is computed under an image plane coordinate system. By adding the displacement of the CCD camera measured using laser interferometer, the line space can be determined. Experiments have been performed repeatedly to measure the line space on the 1.00 and 300.0 mm line scales. Results indicate that the measured data only have a little fluctuation and are close to those obtained by the NML (National Measurement Laboratory, Taiwan).