Propagation of cosh-Gaussian beams diffracted by a circular aperture in turbulent atmosphere

An analytical formula for the average intensity of cosh-Gaussian (ChG) beams diffracted by an aperture in turbulent atmosphere is derived and some limiting cases are discussed. By using the average intensity formula, some numerical simulation comparisons are made and some special cases are studied, especially the influences of the ChG beam parameter (Ω₀), the propagation distance, the aperture and its size on the average normalized intensity distribution. It is determined that the evolution properties of the average normalized intensity profile in turbulent atmosphere with aperture are different not only from those of free space with aperture but also from those in turbulent atmosphere without aperture. PACS 42.68.Bz; 42.79.Ag; 42.25.Fx     

六角星形MoSe_2双层纳米片的制备及其光致发光性能

采用化学气相沉积法,以三氧化钼作为钼源,硒粉作为硒源,在H_2/Ar气氛下生长出硒化钼纳米片.扫描电镜、X射线衍射表征结果表明,MoSe_2产物呈六角星状,横向尺寸约10μm,具有很好的晶体质量和结构.拉曼光谱表征其结构,确定其为双层纳米片.研究表明,高温反应时间对双层纳米片的生长具有重要的影响.通过对双层纳米片的生长机理的探究,推测其经历了3个生长过程:在高温下,Mo源和Se源被气化成气态分子并发生硒化反应形成晶核;晶核呈三角形外延生长;当反应时间持续增加,在空间位阻效应的影响下,晶体以中心原子岛为核,外延耦合生长出第二层三角形,最终形成六角星状双层纳米片.光致发光光谱结果表明,六角星状MoSe_2双层纳米片在1.53 eV处具有直接带隙和1.78 eV处具有间接带隙,其较宽范围的激发光谱响应预测其在光电探测器件领域具有潜在的应用前景.     

低阈值单横模852nm半导体激光器

基于波导理论、等效折射率方法,设计并制备了非对称波导隔离双沟结构脊型边发射激光器,最终获得了低闽值单基侧模852 nm激光器.详细研究了不同脊型台深宽比参数设计对激光器侧向模式特性的影响规律,实现了腔面未镀膜情况下脊型波导边发射激光器的单基侧模稳定输出,同时激射波长可以精确调谐到852 nm;工作电流达到150 mA,工作温度30℃;斜率效率最高可达0.89 nW/mA,光谱半宽小于1 nm.研究结果为进一步实现超窄线宽激光器提供了参考和借鉴,并且为实现激光器稳定输出提供了实验基础.     

Further Apéry-Like Series for Riemann Zeta Function

Mathematical Notes - By means of two transformation formulas of classical hypergeometric series, several Apéry-like series involving harmonic numbers of higher order are derived for the...     

双喷嘴乳粒发生器的研制及初步应用

 叙述了双喷嘴乳粒发生器的工作原理、设计关键点及设计思路,利用该发生器开展了双层乳粒的制备实验研究工作。研制的双喷嘴乳粒发生器在喷嘴处的3层管的位置能够通过简单调节达到同心,使得双层乳粒包覆的可靠性得到提高。研究了制备的乳粒的分散性和稳定性,并分析了形成双层乳粒的油相和水相的流速比,结果证明：利用所研制的双喷嘴乳粒发生器可以容易地制备出单分散性双层乳粒,油相与水相的流速比为0.3~15.0时,可形成双层乳粒。     

Melting temperature and enthalpy variations of phase change materials (PCMs): a differential scanning calorimetry (DSC) analysis

Differential scanning calorimetry (DSC) analysis is a standard thermal analysis technique used to determine the phase transition temperature, enthalpy, heat of fusion, specific heat and activation energy of phase change materials (PCMs). To determine the appropriate heating rate and sample mass, various DSC measurements were carried out using two kinds of PCMs, namely N-octadecane paraffin and calcium chloride hexahydrate. The variations in phase transition temperature, enthalpy, heat of fusion, specific heat and activation energy were observed within applicable heating rates and sample masses. It was found that the phase transition temperature range increased with increasing heating rate and sample mass; while the heat of fusion varied without any established pattern. The specific heat decreased with the increase of heating rate and sample mass. For accuracy purpose, it is recommended that for PCMs with high thermal conductivity (e.g. hydrated salt) the focus will be on heating rate rather than sample mass.     

An upgraded external beam PIXE setup for multielemental analysis of atmospheric aerosol samples

The external beam particle‐induced X‐ray emission (PIXE) setup has been upgraded by introducing a new silicon drift detector with the aim of obtaining better minimum detection limits (MDLs) at the 2 × 1.7 MV Tandetron accelerator of the Beijing Normal University in China. The upgraded external beam PIXE setup is equipped with two silicon drift detectors for PIXE analysis of low and high Z elements. A surface barrier detector for Rutherford backscattering spectrometry monitors beam and helium flow. Two kinds of aerosol filter samples (quartz fiber filters and Teflon filters) were studied. A 200‐μm thick Mylar absorber in front of the medium‐high energy X‐rays detector was adopted, and it got the best MDLs for atmospheric aerosol samples analysis. Multielemental analysis of quartz fiber filter aerosol samples was achieved. For more accurate and better MDLs of low Z elements in PIXE analysis, it is necessary to keep sufficient helium flow behind the thin samples.     

双δ掺杂In0.65Ga0.35As/In0.52Al0.48As赝型高迁移率晶体管材料子带电子特性研究

研究了基于InP基的In0.65Ga0.35As/In0.52Al0.48As赝型高迁移率晶体管材料中纵向磁电阻的Shubnikov-deHaas(SdH)振荡效应和霍耳效应,通过对纵向磁电阻SdH振荡的快速傅里叶变换分析,获得了各子带电子的浓度,并因此求得了各子带能级相对于费米能级的位置.联立求解Schrdinger方程和Poisson方程,自洽计算了样品的导带形状、载流子浓度分布以及各子带能级和费米能级位置.理论计算和实验结果很好符合.实验和理论计算均表明,势垒层的掺杂电子几乎全部转移到了量子阱中,转移率在95%以上.     

Tens of GHz Tantalum pentoxide‐based micro‐ring all‐optical modulator for Si photonics

A tantalum pentoxide‐based (Ta₂O₅‐based) micro‐ring all‐optical modulator was fabricated. The refractive index inside the micro‐ring cavity was modified using the Kerr effect by injecting a pumped pulse. The transmittance of the ring resonator was controlled to achieve all‐optical modulation at the wavelength of the injected probe. When 12 GHz pulses with a peak power of 1.2 W were coupled in the ring cavity, the transmission spectrum of the Ta₂O₅ resonator was red‐shifted by 0.04 nm because of the Kerr effect. The relationship between the modulation depth and gap of the Ta₂O₅ directional coupler is discussed. An optimized gap of 1100 nm was obtained, and a maximum buildup factor of 11.7 with 84% modulation depth was achieved. The nonlinear refractive index of Ta₂O₅ at 1.55 μm was estimated as 3.4 × 10^?14 cm²/W based on the Kerr effect, which is almost an order of magnitude higher than that of Si₃N₄. All results indicate that Ta₂O₅ has potential for use in nonlinear waveguide applications with modulation speeds as high as tens of GHz.

     

Note on Fractional Green's Function

In this paper, we modify some errors on the definition of fractional Green''s function in monograph [5], and give the solution of the inhomogenous equation which satisfies the given inhomogenous initial conditions by fractional Green''s function.