EXAFS characterization of dendrimer-Pt nanocomposites used for the preparation of Pt/gamma-Al2O3 catalysts

Pt/gamma-Al2O3 catalysts were prepared using hydroxyl-terminated generation four (G4OH) PAMAM dendrimers as the templating agents and the various steps of the preparation process were monitored by extended X-ray absorption fine structure (EXAFS) spectroscopy. The EXAFS results indicate that, upon hydrolysis, chlorine ligands in the H(2)PtCl(6) and K(2)PtCl(4) precursors were partially replaced by aquo ligands to form [PtCl3(H2O)3]+ and [PtCl2(H2O)2] species, respectively. The results further suggest that, after interaction of such species with the dendrimer molecules, chlorine ligands from the first coordination shell of Pt were replaced by nitrogen atoms from the dendrimer interior, indicating that complexation took place. This process was accompanied by a substantial transfer of electron density from the dendrimer to platinum, indicating that the dendrimer plays the role of a ligand. Following treatment of the H(2)PtCl(6)/G4OH and K(2)PtCl(4)/G4OH complexes with NaBH4, no substantial changes were observed in the electronic or coordination environment of platinum, indicating that metal nanoparticles were not formed during this step under our experimental conditions. However, when the reduction treatment was performed with H2, the formation of extremely small platinum clusters, incorporating no more than four Pt atoms was observed. The nuclearity of these clusters depends on the length of the hydrogen treatment. These Pt species remained strongly bonded to the dendrimer. Formation of larger platinum nanoparticles, with an average diameter of approximately 10 A, was finally observed after the deposition and drying of the H(2)PtCl(6)/G4OH nanocomposites on a gamma-Al(2)O(3) surface, suggesting that the formation of such nanoparticles may be related to the collapse of the dendrimer structure. The platinum nanoparticles formed appear to have high mobility because subsequent thermal treatment in O2/H2, used to remove the dendrimer component, led to further sintering.     

A flow reactor process for the synthesis of peptides utilizing immobilized reagents, scavengers and catch and release protocols

A general flow process for the multi-step assembly of peptides has been developed and this procedure has been used to successfully construct a series of Boc, Cbz and Fmoc N-protected dipeptides in excellent yields and purities, including an extension of the method to enable the preparation of a tripeptide derivative.     

Targeting glycosylation pathways and the cell cycle: sugar-dependent activity of butyrate-carbohydrate cancer prodrugs

Short-chain fatty acid (SCFA)-carbohydrate hybrid molecules that target both histone deacetylation and glycosylation pathways to achieve sugar-dependent activity against cancer cells are described in this article. Specifically, n-butyrate esters of N-acetyl-D-mannosamine (But4ManNAc, 1) induced apoptosis, whereas corresponding N-acetyl-D-glucosamine (But4GlcNAc, 2), D-mannose (But5Man, 3), or glycerol (tributryin, 4) derivatives only provided transient cell cycle arrest. Western blots, reporter gene assays, and cell cycle analysis established that n-butyrate, when delivered to cells via any carbohydrate scaffold, functioned as a histone deacetylase inhibitor (HDACi), upregulated p21WAF1/Cip1 expression, and inhibited proliferation. However, only 1, a compound that primed sialic acid biosynthesis and modulated the expression of a different set of genes compared to 3, ultimately killed the cells. These results demonstrate that the biological activity of butyrate can be tuned by sugars to improve its anticancer properties.     

The development of radioactive glass surrogates for fallout debris

The production of glass that emulates fallout is desired by the nuclear forensics community for training and measurement exercises. The composition of nuclear fallout is complex, with widely varying isotopic compositions (Fahey et al., Proc Natl Acad Sci USA 107(47):20207–20212, 2010; Bellucci et al., Anal Chem 85:7588–7593, 2013; Wallace et al., J Radioanal Nucl Chem, 2013; Belloni et al., J Environ Radioact 102:852–862, 2011; Freiling, Science 139:1058–1059, 1963; Science 133:1991–1999, 1961; Bunney and Sam Government Report: Naval Ordinance Laboratory, White Oak, 1971). As the gaseous cloud traverses from hotter to cooler regions of the atmosphere, the processes of condensation and nucleation entrain environmental materials, vaporized nuclear materials and fission products. The elemental and isotopic composition of the fission products is altered due to chemical fractionation (i.e. the fission product composition that would be expected from fission of the original nuclear material is altered by differences in condensation rates of the elements); the fallout may be enriched or depleted in volatile or refractory fission products. This paper describes preliminary work to synthesize, irradiate and fractionate the fission product content of irradiated particulate glass using a thermal distillation 2 h after irradiation. The glass was synthesized using a solution-based polymerization of tetraethyl orthosilicate. (Izrael, Radioactive fallout after nuclear explosions and accidents, 2002) Uranium was incorporated into the glass particulate at trace concentrations during polymerization. The particulate was subjected to a short thermal neutron irradiation then heated to 1,273 K approximately 2 h after the end of irradiation. Fission products of ^{133, 134, 135}I, ^{132, 134}Te, ¹³⁵Xe, ¹³⁸Cs and ^{91, 92}Sr were observed to be distilled from the particulate. The results of these preliminary studies are discussed.     

Synthesis,Characterisation and Reactivity of Copper(I) Amide Complexes and Studies on Their Role in the Modified Ullmann Amination Reaction

A series of copper(I) alkylamide complexes have been synthesised; copper(I) dicyclohexylamide ( 1 ), copper(I) 2,2,6,6‐tetramethylpiperidide ( 2 ), copper(I) pyrrolidide ( 3 ), copper(I) piperidide ( 4 ), and copper(I) benzylamide ( 5 ). Their solid‐state structures and structures in [D₆]benzene solution are characterised, with the aggregation state in solution determined by a combination of DOSY NMR spectroscopy and DFT calculations. Complexes 1 , 2 and 4 are shown to exist as tetramers in the solid state by X‐ray crystallography. In [D₆]benzene solution, complexes 1 , 2 and 5 were found by using ¹H DOSY NMR to exist in rapid equilibrium between aggregates with average aggregation numbers of 2.5, 2.4 and 3.3, respectively, at 0.05 M concentration. Conversely, distinct trimeric, tetrameric and pentameric forms of 3 and 4 were distinguishable by one‐dimensional ¹H and ¹H DOSY NMR spectroscopy. Complexes 3 – 5 are found to react stoichiometrically with iodobenzene, in the presence or absence of 1,10‐phenanthroline as an ancillary ligand, to give arylamine products indicative of their role as potential intermediates in the modified Ullmann reaction. The role of phenanthroline has also been explored both in the stoichiometric reaction and in the catalytic Ullmann protocol.     

Triggering the Directional Selectivity of a Ring‐Closure Reaction Leads to Pyridoazacarbazoles with Anticancer Properties

We herein describe a facile and versatile synthetic route to the tetracyclic system of 6‐substituted 5,6‐dihydro‐11H‐pyrido[3,2‐i]‐1‐azacarbazoles with promising anticancer properties. These derivatives are built up by an elegant one‐step base‐catalyzed synthetic procedure from commercially available building blocks. One additional step provides the corresponding skeleton hitherto unknown in the literature. The possibility to synthesize a large library of compounds with various substitution patterns utilizing this method underlines the importance of this synthetic procedure.     

A Self‐Improved Water‐Oxidation Catalyst: Is One Site Really Enough?

The homogeneous catalysis of water oxidation by transition‐metal complexes has experienced spectacular development over the last five years. Practical energy‐conversion schemes, however, require robust catalysts with large turnover frequencies. Herein we introduce a new oxidatively rugged and powerful dinuclear water‐oxidation catalyst that is generated by self‐assembly from a mononuclear catalyst during the catalytic process. Our kinetic and DFT computational analysis shows that two interconnected catalytic cycles coexist while the mononuclear system is slowly and irreversibly converted into the more stable dinuclear system: an extremely robust water‐oxidation catalyst that does not decompose over extended periods of time.     

Silicon‐containing trifunctional and tetrafunctional cyanate esters: Synthesis,cure kinetics,and network properties

The synthesis and physical properties of new silicon‐containing polyfunctional cyanate ester monomers methyl[tris(4‐cyanatophenyl)]silane and tetrakis(4‐cyanatophenyl)silane, as well as polycyanurate networks formed from these monomers are reported. The higher crosslinking functionality compared to di(cyanate ester) monomers enables much higher ultimate glass transition temperatures to be obtained as a result of thermal cyclotrimerization. The ability to reach complete conversion is greatly enhanced by cocure of the new monomers with di(cyanate ester) monomers such as 1,1‐bis(4‐cyanatophenyl)ethane. The presence of silicon in these polycyanurate networks imparts improved resistance to rapid oxidation at elevated temperatures, resulting in char yields as high as 70% under nitrogen and 56% in air in the best‐performing networks. The water uptake in the silicon‐containing networks examined is 4–6 wt % after 96 h of immersion at 85 °C, considerably higher than both carbon‐containing and/or di(cyanate ester) analogs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 767–779     

Synthesis and self‐assembly of thermosensitive double‐hydrophilic poly(N‐vinylcaprolactam)‐b‐poly(N‐vinyl‐2‐pyrrolidone) diblock copolymers

We report on novel diblock copolymers of poly(N‐vinylcaprolactam) (PVCL) and poly(N‐vinyl‐2‐pyrrolidone) (PVPON) (PVCL‐b‐PVPON) with well‐defined block lengths synthesized by the MADIX/reversible addition‐fragmentation chain transfer (RAFT) process. We show that the lower critical solution temperatures (LCST) of the block copolymers are controllable over the length of PVCL and PVPON segments. All of the diblock copolymers dissolve molecularly in aqueous solutions when the temperature is below the LCST and form spherical micellar or vesicular morphologies when temperature is raised above the LCST. The size of the self‐assembled structures is controlled by the molar ratio of PVCL and PVPON segments. The synthesized homopolymers and diblock copolymers are demonstrated to be nontoxic at 0.1–1 mg mL^?1 concentrations when incubated with HeLa and HEK293 cancer cells for various incubation times and have potential as nanovehicles for drug delivery. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2725–2737     

Surface energy gradient driven convection for generating nanoscale and microscale patterned polymer films using photosensitizers

The Marangoni effect describes how fluid flows in response to gradients in surface energy. This phenomenon could be broadly harnessed to pattern the surface topography of polymer films if generalizable techniques for programming surface energy gradients existed. Here, a near UV–visible light (NUV–vis) photosensitizer, 9,10‐dibromo‐anthracene (DBA), was doped into thin films of a model polymer, poly(isobutyl methacrylate). After exposure to light through a photomask and heating above the glass transition, thermolysis of photo‐oxidized DBA and grafting to the polymer promoted flow of the film material into the exposed regions. This mechanism did not significantly alter the molecular weight of PiBMA or the film's glass transition temperature, but resulted in an increase in film surface energy as indicated by a decrease in water contact angle. Film height variations of 580 nm were produced using a mask with 12.5 μm features; a mask with 800 nm features was also employed to generate topographic features of corresponding width without expensive contacting equipment. Due to the broad absorbance spectra of DBA, highly accessible and/or unconventional light sources may be employed in this process; this advantage was demonstrated by patterning with sunlight. The nonspecific radical‐mediated nature of the DBA grafting reaction makes this a promising approach for many classes of polymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1195–1202