Gadolinium chelate coated gold nanoparticles as contrast agents for both X-ray computed tomography and magnetic resonance imaging

Functionalized gold nanoparticles were applied as contrast agents for both in vivo X-ray and magnetic resonance imaging. These particles were obtained by encapsulating gold cores within a multilayered organic shell which is composed of gadolinium chelates bound to each other through disulfide bonds. The contrast enhancement in MRI stems from the presence of gadolinium ions which are entrapped in the organic shell, whereas the gold core provides a strong X-ray absorption. This study revealed that these particles suited for dual modality imaging freely circulate in the blood vessels without undesirable accumulation in the lungs, spleen, and liver.     

Photoinduced magnetization in copper octacyanomolybdate

This article describes the studies of a photomagnetic cyanide-bridged Cu-Mo bimetallic assembly, Cu(II)(2)[Mo(IV)(CN)(8)].8H(2)O (Cu(II), S = (1)/(2); Mo(IV), S = 0) (1), which has an intervalence transfer (IT) band from Mo(IV)-CN-Cu(II) to Mo(V)-CN-Cu(I) around 480 nm. Wide-angle X-ray scattering and X-ray spectroscopic studies provide precise information about the 3D connectivity and the local environment of the transition metal ions. Irradiating with blue light causes solid 1 to exhibit a spontaneous magnetization (Curie temperature = 25 K). The thermal reversibility is carefully studied and shows the long-time stability of the photoinduced state up to 100 K. Photoreversibility is also observed; i.e., the magnetization is induced by irradiation with light below 520 nm, while the magnetization is reduced by irradiation with light above 520 nm. The UV-vis absorption spectrum after irradiation shows a decrease of the IT band and the appearance of the reverse-IT band in the region of 600-900 nm (lambda(max) = 710 nm). This UV-vis absorption spectrum is recovered to the original spectrum by irradiation with 658-, 785-, and 840-nm light. In this photomagnetic effect, the excitation of the IT band causes an electron transfer from Mo(IV) to Cu(II), producing a ferromagnetic mixed-valence isomer of Cu(I)Cu(II)[Mo(V)(CN)(8)].8H(2)O (Cu(I), S = 0; Cu(II), S = (1)/(2); Mo(V), S = (1)/(2)) (1'). 1' returns to 1 by irradiation of the reverse-IT band, which obeys the scheme for the potential energy surface in mixed-valence class II compounds.     

A selective synthesis of hydroxyborate anions as novel anchors for zirconocene catalysts

A new family of hydroxytris(pentafluorophenyl)borate anions [B(C6F5)3OH](-) associated with organic and aprotic cations c+ (imidazolium, pyrrolidinium and phosphonium) has been prepared by a general one-pot synthesis that implies the chloride borate analogues [B(C6F5)3Cl](-)[c]+. The [c]+[B(C6F5)3OH](-) salts have been isolated and fully characterized. The borate anion [B(C6F5)3OH](-) has been shown to protonate the Zr-Me bond in the Cp2ZrMe2 complex forming CH4 and the first published example of anionic [Cp2Zr(Me)OB(C6F5)3](-) species. Standard spectroscopic methods demonstrate the covalent character of the Zr metal center and the anionic character of the boron atom. This protonolysis methodology using [B(C6F5)3OH](-) anion affords a new route for the incorporation of a covalently bonded anionic functionality on organometallic complexes. This provides a new way to immobilize transition metal complexes in ionic liquids.     

Adsorption of L-lysine on Cu(110): a RAIRS study from UHV to the liquid phase

The adsorption of L-lysine on a Cu(110) surface has been investigated under UHV conditions from the sublimation of a crystalline phase. The adsorption was characterized by Fourier transform reflection absorption infrared spectroscopy (FT-RAIRS) during exposure and Auger electron spectroscopy (AES). At room temperature, the lysine molecules' adsorption geometry varies as a function of the exposure. At low coverage, the molecules are adsorbed via the oxygen atoms of the deprotonated carboxylate group and the nitrogen atom of the amino group. At high coverage, close to the monolayer, the molecules reorient to be anchored to the surface via one oxygen of a sideways-tilted carboxylate moiety. This first step is followed by the growth of multilayers of nonoriented molecules. In contrast, adsorption on an oxygen-modified copper surface leads to a rather disordered layer. The results are compared with the adsorption carried out on a polycrystalline copper surface after immersion in solutions of lysine at various pH values. The adsorption was monitored by polarization modulation infrared spectroscopy (PM-IRRAS). The chemistry of the adsorbed molecules is function of the starting chemical form of the lysine molecules imposed by the pH of the solution. The combination of the two techniques and various sets of adsorption conditions will give important insight into the adsorption of biomolecules on metal surfaces and the influence of water and surface oxygen.     

Reactivity differences between molecular and surface silanols in the preparation of homogeneous and heterogeneous olefin metathesis catalysts

The reaction of Mo(N)(CH₂tBu)₃ (1) and SiO_2-(700) generates (SiO)Mo(NH)(CHtBu)(CH₂tBu) (2) when performed in C₆H₆ (material [1/SiO_2-(700)]_C6H6). The grafting occurs presumably by protonation of the nitrido ligand to form an intermediate (SiO)Mo(NH)(CH₂tBu)₃ (3), a pentacoordinated complex, which decomposes into 2 and 2,2-dimethylpropane. While [1/SiO_2-(700)]_C6H6 is highly active in olefin metathesis, [1/SiO_2-(700)]_CH2Cl2 and [1/SiO_2-(700)]_THF are poorly active or inactive catalysts respectively. In contrast, when Mo(N)(CH₂tBu)₃ reacts with a molecular silanol derivative, a soluble model of the surface of SiO_2-(700), it yields a very stable complex, (c-C₅H₉)₇Si₇O₁₂SiO-Mo(NH)(CH₂tBu)₃ (3m), which does not spontaneously generate 2,2-dimethylpropane and an alkylidene complex in contrast to the surface complex. Moreover, 3m does not catalyse olefin metathesis at room temperature as it does not already contain the initiating carbene ligand, and it is necessary to heat up the reaction mixture to 110 °C to obtain low catalytic activity. Nevertheless, the complex 3m generates well-defined metallocarbenes when heated in the presence of PMe₃: (c-C₅H₉)₇Si₇O₁₂SiO-Mo(N)(CHtBu)(P(CH₃)₃)₂ (4m) as a 10:1 mixture of its syn and anti rotamers with the loss of 2 equiv. of 2,2-dimethylpropane.     

An SFG/DFG investigation of CN− adsorption at an Au electrode in 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl) amide ionic liquid

In this paper we report an SFG/DFG investigation of the adsorption of CN^? – used as a probe molecule to study the electrochemical double-layer structure – at a polycrystalline Au electrode in 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl) amide ([BMP][TFSA]) room-temperature ionic liquid (RTIL). The adsorption of CN^? yielded single SFG and DFG bands in the range from ca. 2125 to 2135 cm^?1, exhibiting a Stark tuning of ca. 3 cm^?1 V^?1. Vibrational resonances – corresponding to modes of the RTIL coadsorbed with CN^?, were found in the range from ca. 1200 to 1500 cm^?1. The study of the double-layer structure was complemented by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements, from which the differential double-layer capacity (C_DL) was estimated.     

A rhodium-catalyzed C-H activation/cycloisomerization tandem

A reaction cascade comprising a rhodium-catalyzed C-H activation, a subsequent hydrometalation of an alkylidene cyclopropane in vicinity, regioselective C-C bond activation of the flanking cyclopropane ring, followed by reductive elimination of the resulting metallacycle, opens a new entry into functionalized cycloheptene derivatives. This crossover of C-H activation and higher order cycloaddition has been performed in two different formats, either using alkylidenecyclopropanes with a lateral vinylpyridine moiety or with a pending aldehyde group as the trigger. The reaction tolerates various functional groups, leaves chiral centers alpha to the reacting sites unaffected, and proceeds with excellent stereoselectivity. Labeling experiments support the proposed mechanism explaining the observed net cycloisomerization process.     

Monomeric Copper(II) Sites Supported on Alumina Selectively Convert Methane to Methanol

Monomeric Cu^II sites supported on alumina, prepared using surface organometallic chemistry, convert CH₄ to CH₃OH selectively. This reaction takes place by formation of CH₃O surface species with the concomitant reduction of two monomeric Cu^II sites to Cu^I, according to mass balance analysis, infrared, solid‐state nuclear magnetic resonance, X‐ray absorption, and electron paramagnetic resonance spectroscopy studies. This material contains a significant fraction of Cu active sites (22 %) and displays a selectivity for CH₃OH exceeding 83 %, based on the number of electrons involved in the transformation. These alumina‐supported Cu^II sites reveal that C?H bond activation, along with the formation of CH₃O‐ surface species, can occur on pairs of proximal monomeric Cu^II sites in a short reaction time.     

Rates of intra- and intermolecular electron transfers in hydrogenase deduced from steady-state activity measurements

Electrons are transferred over long distances along chains of FeS clusters in hydrogenases, mitochondrial complexes, and many other respiratory enzymes. It is usually presumed that electron transfer is fast in these systems, despite the fact that there has been no direct measurement of rates of FeS-to-FeS electron transfer in any respiratory enzyme. In this context, we propose and apply to NiFe hydrogenase an original strategy that consists of quantitatively interpreting the variations of steady-state activity that result from changing the nature of the FeS clusters which connect the active site to the redox partner, and/or the nature of the redox partner. Rates of intra- and intermolecular electron transfer are deduced from such large data sets. The mutation-induced variations of electron transfer rates cannot be explained by changes in intercenter distances and reduction potentials. This establishes that FeS-to-FeS rate constants are extremely sensitive to the nature and coordination of the centers.     

Ultraviolet-C light for treatment of Candida albicans burn infection in mice

Burn patients are at high risk of invasive fungal infections, which are a leading cause of morbidity, mortality, and related expense exacerbated by the emergence of drug resistant fungal strains. In this study, we investigated the use of UVC light (254 nm) for the treatment of yeast Candida albicans infection in mouse third degree burns. In vitro studies demonstrated that UVC could selectively kill the pathogenic C. albicans compared with a normal mouse keratinocyte cell line in a light exposure dependent manner. A mouse model of chronic C. albicans infection in non-lethal third degree burns was developed. The C. albicans strain was stably transformed with a version of the Gaussia princeps luciferase gene that allowed real-time bioluminescence imaging of the progression of C. albicans infection. UVC treatment with a single exposure carried out on day 0 (30 min postinfection) gave an average 2.16-log(10)-unit (99.2%) loss of fungal luminescence when 2.92 J cm(-2) UVC had been delivered, while UVC 24 h postinfection gave 1.94-log(10)-unit (95.8%) reduction of fungal luminescence after 6.48 J cm(-2). Statistical analysis demonstrated that UVC treatment carried out on both day 0 and day 1 significantly reduced the fungal bioburden of infected burns. UVC was found to be superior to a topical antifungal drug, nystatin cream. UVC was tested on normal mouse skin and no gross damage was observed 24 h after 6.48 J cm(-2). DNA lesions (cyclobutane pyrimidine dimers) were observed by immunofluorescence in normal mouse skin immediately after a 6.48 J cm(-2) UVC exposure, but the lesions were extensively repaired at 24 h after UVC exposure.