Structural, textural, and electronic properties of a nanosized mesoporous ZnxTi1-xO2-) solid solution prepared by a supercritical drying route

Mesoporous nanosized TiO2 and Zn(x)Ti(1-x)O(2-x) solid solution having a Zn content below 10 mol % with a particles size between 13 and 17 nm are prepared by a template-free sol-gel method followed by high-temperature supercritical drying in 2-propanol. The structural, textural, and electronic properties of the obtained nanomaterials are methodically investigated by using XRD, SEM, TEM, ED, HREM, EDX, ICP-OES, N(2) adsorption-desorption, Raman spectroscopy, and diffuse reflectance UV-vis spectroscopy. It is shown that the proposed synthesis technique leads to the formation of a Zn(x)Ti(1-x)O(2-x) solid solution based on the anatase crystal structure rather than a two-phase sample. High-resolution electron microscopy and electron diffraction indicate that the distribution of zinc atoms over the anatase structure does not lead to a considerable deformation of the crystal structure.     

Reactivity differences between molecular and surface silanols in the preparation of homogeneous and heterogeneous olefin metathesis catalysts

The reaction of Mo(N)(CH₂tBu)₃ (1) and SiO_2-(700) generates (SiO)Mo(NH)(CHtBu)(CH₂tBu) (2) when performed in C₆H₆ (material [1/SiO_2-(700)]_C6H6). The grafting occurs presumably by protonation of the nitrido ligand to form an intermediate (SiO)Mo(NH)(CH₂tBu)₃ (3), a pentacoordinated complex, which decomposes into 2 and 2,2-dimethylpropane. While [1/SiO_2-(700)]_C6H6 is highly active in olefin metathesis, [1/SiO_2-(700)]_CH2Cl2 and [1/SiO_2-(700)]_THF are poorly active or inactive catalysts respectively. In contrast, when Mo(N)(CH₂tBu)₃ reacts with a molecular silanol derivative, a soluble model of the surface of SiO_2-(700), it yields a very stable complex, (c-C₅H₉)₇Si₇O₁₂SiO-Mo(NH)(CH₂tBu)₃ (3m), which does not spontaneously generate 2,2-dimethylpropane and an alkylidene complex in contrast to the surface complex. Moreover, 3m does not catalyse olefin metathesis at room temperature as it does not already contain the initiating carbene ligand, and it is necessary to heat up the reaction mixture to 110 °C to obtain low catalytic activity. Nevertheless, the complex 3m generates well-defined metallocarbenes when heated in the presence of PMe₃: (c-C₅H₉)₇Si₇O₁₂SiO-Mo(N)(CHtBu)(P(CH₃)₃)₂ (4m) as a 10:1 mixture of its syn and anti rotamers with the loss of 2 equiv. of 2,2-dimethylpropane.     

Synthesis of C-3' methyl taxotere (docetaxel)

Protected (3R,4S)-N-Boc-3-hydroxy-4-methyl-4-phenylazetidin-2-one has been synthesized stereoselectively and used to esterify protected 10-desacetylbaccatin III to give, following removal of the protecting groups, novel C-3' methyl taxotere (docetaxel).     

Volumetric properties of the boldine + alcohol mixtures at atmospheric pressure from 283.15 to 333.15 K: A new method for the determination of the density of pure boldine

Densities of boldine + alcohol binary mixtures were measured over the whole accessible range of boldine compositions at temperatures from 283.15 to 333.15 K using an Anton-Paar digital vibrating glass tube densimeter. The binary systems studied include, as a solvent, seven normal alcohols from n-C₁ to n-C₆, n-C₈, and isopropanol. The density of these systems has been found an increasing function of the boldine composition. A new methodology based on density data of solutions of solid solutes with normal alcohols is described in order to determine solid molar volume of pure solutes. This methodology was validated with pure solid naphthalene molar volumes data at 298.15 K, with an average uncertainty of 6%.     

Langmuir films of (alpha-amino) phosphorus amphiphiles on various ion-containing subphases

Monolayers of amphiphilic (alpha-amino)phosphonocarboxylic and (alpha-amino)phosphonic acids have been formed by adsorption at the air/water interface. The influence of both the ionic strength and the pH of the subphase on the stability and compactness of the monolayers have been studied. The stability and the compactness of the Langmuir films are enhanced by introduction of metallic ions such as Ca(2+) or Mg(2+) in the subphases. These effects are more pronounced with Ca(2+). These metal ions can form dimeric complexes with the phosphorus moieties of the surfactant polar heads and therefore bring the amphiphiles closer. For the less hydrophobic derivative, complexation with Ca(2+) or Mg(2+) is required to ensure the formation of a stable monomolecular film. For both phosphonocarboxylic and phosphonic compounds, models have been proposed to represent the complexation phenomenon at the air/water interface.     

Regioselective palladium-catalyzed phenylation of ethyl 4-oxazolecarboxylate

The efficient and regioselective palladium-catalyzed C-2 arylation of ethyl 4-oxazolecarboxylate 1 with phenyliodide is described. The different parameters (solvent, base, ligand and catalyst) for the optimal conditions of this arylation process have been screened.     

Optimization of a GFAAS method for determination of total inorganic arsenic in drinking water

The new 10 μg l⁻¹ arsenic standard in drinking water has been a spur to the search for reliable routine analytical methods with a limit of detection at the μg l⁻¹ level. These methods also need to be easy to handle due to the routine analyses that are required in drinking water monitoring. Graphite furnace atomic absorption spectrometry (GFAAS) meets these requirements, but the limit of detection is generally too high except for methods using a pre-concentration or separation step. The use of a high-intensity boosted discharge hollow-cathode lamp decreases the baseline noise level and therefore allows a lower limit of detection. The temperature program, chemical matrix modifier and thermal stabilizer additives were optimized for total inorganic arsenic determination with GFAAS, without preliminary treatment. The optimal furnace program was validated with a proprietary software. The limit of detection was 0.26 μg As l⁻¹ for a sample volume of 16 μl corresponding to 4.2 pg As. This attractive technique is rapid as 20 samples can be analysed per hour. This method was validated with arsenic reference solutions. Its applicability was verified with artificial and natural groundwaters. Recoveries from 91 to 105% with relative standard deviation <5% can be easily achieved. The effect of interfering anions and cations commonly found in groundwater was studied. Only phosphates and silicates (respectively at 4 and 20 mg l⁻¹) lead to significant interferences in the determination of total inorganic arsenic at 4 μg l⁻¹.     

Free-energy calculations of protein-ligand cation-pi and amino-pi interactions: from vacuum to proteinlike environments

To probe the role of cation-pi and amino-pi interactions in the context of protein-ligand interactions, the stability of 55 X-ray cation/amino-pi motifs involving the Ade moieties of cofactor molecules and Arg, Lys, Asn, or Gln side chains of their host protein was evaluated using quantum chemistry calculations. The conjunction of vacuum interaction energies, vibrational entropy, and solvation contributions led to identify Arg-Ade as the most favorable cation/amino-pi complex in the solvents considered, followed by Asn/Gln-Ade and Lys-Ade: their minimum interaction free energies are approximately equal to -7, -4, and -2 kcal/mol, respectively, in the solvents of dielectric constant similar to that estimated for proteins (i.e., acetone, THF, and CCl(4)). Remarkably, these free-energy values of cation/amino-pi interactions correlate well with their frequency of occurrences in protein-ligand structures, which corroborates our approach in the absence of experimental data.     

Use of electrospray mass spectrometry (ESI-MS) for the study of europium(III) complexation with bis(dialkyltriazinyl)pyridines and its implications in the design of new extracting agents

ESI mass spectrometry was used to investigate the europium complexation by tridentate ligands L identical with 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)-pyridines (DATP) that have shown unique separation properties of actinides(III) from lanthanides(III) in nitric acid solutions. Complexes of three ligands, namely methyl (DMTP), n-propyl (DnPTP), and iso-propyl (DiPTP), have been investigated in acidic solutions to check the aqueous-phase stability of Eu(L)(3)(3+) ions identified previously in the solid state. The data obtained show, first, the presence of stable Eu(L)(3)(3+) ions with DnPTP (log beta(3)(app) = 12.0 +/- 0.5) and DiPTP (log beta(3)(app) = 14.0 +/- 0.6) in methanol/water (1:1 v/v) solutions under pH range 2.8-4.6 and, second, a mechanism whereby alkyl moieties contribute to a self-assembling process leading to the formation of Eu(L)(3)(3+) ions. Other complexes such as Eu(L)(2)(3+) ions are only observed for DnPTP (log beta(2)(app) = 6.7 +/- 0.5) and DMTP (log beta(2)(app) = 6.3 +/- 0.1) and Eu(L)(3+) only for DMTP (log beta(1)(app) = 2.9 +/- 0.2). The log beta(n)(app) values for the Eu(L)(n)(3+) (n = 1-3) complexes were determined at pH 2.8. Better insight was given in this study concerning the role of the hydrophobic exterior of the ligands for the design of a new range of extracting agents.