Monomeric Copper(II) Sites Supported on Alumina Selectively Convert Methane to Methanol

Monomeric Cu^II sites supported on alumina, prepared using surface organometallic chemistry, convert CH₄ to CH₃OH selectively. This reaction takes place by formation of CH₃O surface species with the concomitant reduction of two monomeric Cu^II sites to Cu^I, according to mass balance analysis, infrared, solid‐state nuclear magnetic resonance, X‐ray absorption, and electron paramagnetic resonance spectroscopy studies. This material contains a significant fraction of Cu active sites (22 %) and displays a selectivity for CH₃OH exceeding 83 %, based on the number of electrons involved in the transformation. These alumina‐supported Cu^II sites reveal that C?H bond activation, along with the formation of CH₃O‐ surface species, can occur on pairs of proximal monomeric Cu^II sites in a short reaction time.     

Rates of intra- and intermolecular electron transfers in hydrogenase deduced from steady-state activity measurements

Electrons are transferred over long distances along chains of FeS clusters in hydrogenases, mitochondrial complexes, and many other respiratory enzymes. It is usually presumed that electron transfer is fast in these systems, despite the fact that there has been no direct measurement of rates of FeS-to-FeS electron transfer in any respiratory enzyme. In this context, we propose and apply to NiFe hydrogenase an original strategy that consists of quantitatively interpreting the variations of steady-state activity that result from changing the nature of the FeS clusters which connect the active site to the redox partner, and/or the nature of the redox partner. Rates of intra- and intermolecular electron transfer are deduced from such large data sets. The mutation-induced variations of electron transfer rates cannot be explained by changes in intercenter distances and reduction potentials. This establishes that FeS-to-FeS rate constants are extremely sensitive to the nature and coordination of the centers.     

Ultraviolet-C light for treatment of Candida albicans burn infection in mice

Burn patients are at high risk of invasive fungal infections, which are a leading cause of morbidity, mortality, and related expense exacerbated by the emergence of drug resistant fungal strains. In this study, we investigated the use of UVC light (254 nm) for the treatment of yeast Candida albicans infection in mouse third degree burns. In vitro studies demonstrated that UVC could selectively kill the pathogenic C. albicans compared with a normal mouse keratinocyte cell line in a light exposure dependent manner. A mouse model of chronic C. albicans infection in non-lethal third degree burns was developed. The C. albicans strain was stably transformed with a version of the Gaussia princeps luciferase gene that allowed real-time bioluminescence imaging of the progression of C. albicans infection. UVC treatment with a single exposure carried out on day 0 (30 min postinfection) gave an average 2.16-log(10)-unit (99.2%) loss of fungal luminescence when 2.92 J cm(-2) UVC had been delivered, while UVC 24 h postinfection gave 1.94-log(10)-unit (95.8%) reduction of fungal luminescence after 6.48 J cm(-2). Statistical analysis demonstrated that UVC treatment carried out on both day 0 and day 1 significantly reduced the fungal bioburden of infected burns. UVC was found to be superior to a topical antifungal drug, nystatin cream. UVC was tested on normal mouse skin and no gross damage was observed 24 h after 6.48 J cm(-2). DNA lesions (cyclobutane pyrimidine dimers) were observed by immunofluorescence in normal mouse skin immediately after a 6.48 J cm(-2) UVC exposure, but the lesions were extensively repaired at 24 h after UVC exposure.     

Comparative studies of nontoxic and toxic amyloids interacting with membrane models at the air-water interface

Many in vitro studies have pointed out the interaction between amyloids and membranes, and their potential involvement in amyloid toxicity. In a previous study, we generated a yeast toxic mutant (M8) of the harmless model amyloid protein HET-s((218-289)). In this study, we compared the self-assembling process of the nontoxic wild-type (WT) and toxic (M8) protein at the air-water interface and in interaction with various phospholipid monolayers (DOPE, DOPC, DOPI, DOPS and DOPG). We first demonstrate using ellipsometry measurements and polarization-modulated infrared reflection absorption spectroscopy (PMIRRAS) that the air-water interface promotes and modifies the assembly of WT since an amyloid-like film was instantaneously formed at the interface with an antiparallel β-sheet structuration instead of the parallel β-sheet commonly observed for amyloid fibers generated in solution. The toxic mutant (M8) behaves in a similar manner at the air-water interface or in bulk, with a fast self-assembling and an antiparallel β-sheet organization. The transmission electron microscopy (TEM) images established the fibrillous morphology of the protein films formed at the air-water interface. Second, we demonstrate for the first time that the main driving force between this particular fungus amyloid and membrane interaction is based on electrostatic interactions with negatively charged phospholipids (DOPG, DOPI, DOPS). Interestingly, the toxic mutant (M8) clearly induces perturbations of the negatively charged phospholipid monolayers, leading to a massive surface aggregation, whereas the nontoxic (WT) exhibits a slight effect on the membrane models. This study allows concluding that the toxicity of the M8 mutant could be due to its high propensity to interact with membranes.     

Recent advances in amino acid analysis by capillary electrophoresis

Amino acids are studied extensively using capillary electrophoresis. In a previous article, we reviewed applications reported in the period 1999-early 2001 (Prata, C., Bonnafous, P., Fraysse, N., Treilhou, M., Poinsot, V., Couderc, F., Electrophoresis 2001, 22, 4129-4138). In this article we follow on with this review for the period end of 2001-beginning of 2003. We will report the developments of detection methods, separations of enantiomers, the new medical applications, and amino acids in food and plants. This review shows that CE is more and more important for the amino acid analysis.     

Reversible and Efficient Inhibition of UDP‐Galactopyranose Mutase by Electrophilic,Constrained and Unsaturated UDP‐Galactitol Analogues

A series of UDP‐galactitols were designed as analogues of high‐energy intermediates of the UDP‐galactopyranose mutase (UGM) catalyzed furanose/pyranose interconversion, an essential step of Mycobacterium tuberculosis cell wall biosynthesis. The final compounds structurally share the UDP and the galactitol substructures that were connected by four distinct electrophilic connections (epoxide, lactone and Michael acceptors). All molecules were synthesized from a common perbenzylated acyclic galactose precursor that was derivatized by alkenylation, alkynylation and cyclopropanation. The inhibition study against UGM could clearly show that slight changes in the relative orientation of the UDP and the galactitol moieties resulted in dramatic variations of binding properties. Compared to known inhibitors, the epoxide derivative displayed a very tight, reversible, inhibition profile. Moreover, a time‐dependent inactivation study showed that none of these electrophilic structures could react with UGM, or its FAD cofactor, the catalytic nucleophile of this still intriguing reaction.     

Controlled pinewood fractionation with supercritical ethanol: A prerequisite toward pinewood conversion into chemicals and biofuels

The objective of this work was to investigate the ability of supercritical (SC) ethanol conditions to attack preferentially the lignin fraction against the carbohydrate fraction and their effects on the product distribution among gases, light products, bio-oils, and chars. In this study, the conversion of each pinewood component was determined by the analysis of solid residues to quantify cellulose, hemicellulose, lignin, and char contents. It is shown that, by tuning the temperature, hemicellulose and lignin are already transformed in subcritical ethanol conditions, lignin being more reactive than hemicellulose. In contrast, native wood cellulose is recalcitrant to liquefaction in SC ethanol near the critical point (T_c = 241 °C and P_c = 61 bar), but 20% of native wood cellulose is converted in SC ethanol at 280 °C. Besides, the severity of the conditions, in terms of temperature and treatment time, does not significantly influence the yields of gases, light products, and bio-oils but strongly enhances char formation. Interestingly, the increase in SC ethanol density does not change the conversion of biomass components but has a marked effect on bio-oil yield and prevents char formation. The optimum fractionation conditions to convert the lignin component, while keeping unattacked the cellulose fraction with a minimum formation of char, are dense SC ethanol, at 250 °C for 1 h, in batch conditions. However, although lignin is more reactive than hemicellulose under these conditions, these fractions are converted, in a parallel way, to around 50% and 60%, respectively.     

Can Coordination‐Driven Supramolecular Self‐Assembly Reactions Be Conducted from Fully Aliphatic Linkers?

The reaction between a preassembled Cu^I bimetallic molecular clip with a short intermetallic distance and a series of fully aliphatic cyano‐capped ditopic linkers with increasing lengths was investigated. It is shown that, depending on the length of the ditopic linkers, the rational design of unprecedented supramolecular compact metallacycles containing fully aliphatic walls is possible. The specific preorganized molecular arrangement of the molecular clip used favors stabilizing interlinker London dispersion interactions, which allow, as the length of the linkers increases, the selective formation of discrete compact metallacycles at the expense of 1D coordination polymers. The generalizability of this approach was demonstrated by the reaction of fully aliphatic cyano‐capped linkers with two other types of preassembled Cu^I bimetallic molecular clips that also had short intermetallic distances.     

The structure of fosfomycin salts in solution and in the solid state by nuclear magnetic resonance spectroscopy and DFT calculations

Two samples of fosfomycin salts, the calcium and the disodium ones, were used to record their NMR spectra both in solution and in the solid state. The existence of fosfomycin in a neutral and two ionized structures (mono and dianion) was considered to interpret the spectra that were solved using the GIAO calculated chemical shifts of the minimum energy conformations. Although the starting materials were dianions, the spectra in solution show the presence of monoanions.     

MaxSynBio: Avenues Towards Creating Cells from the Bottom Up

A large German research consortium mainly within the Max Planck Society (“MaxSynBio”) was formed to investigate living systems from a fundamental perspective. The research program of MaxSynBio relies solely on the bottom‐up approach to synthetic biology. MaxSynBio focuses on the detailed analysis and understanding of essential processes of life through modular reconstitution in minimal synthetic systems. The ultimate goal is to construct a basic living unit entirely from non‐living components. The fundamental insights gained from the activities in MaxSynBio could eventually be utilized for establishing a new generation of biotechnological processes, which would be based on synthetic cell constructs that replace the natural cells currently used in conventional biotechnology.