Influence of increasing zinc contents in brass in the early stages of corrosion investigated by in-situ TM-AFM and SIMS

In-situ tapping mode atomic force microscopy (TM-AFM), a powerful, high-resolution imaging technique for determining the structure of surfaces and ex-situ secondary ion mass spectroscopy (SIMS), a multielement, high-depth-resolution method, were used to examine the influence of increasing zinc contents in brass in the early stages of corrosion. Four different samples (pure Cu, pure Zn, Cu/Zn=90/10 wt% and Cu/Zn=70/30 wt%) were studied in order to determine their chemical behaviour under various atmospheric conditions. The in-situ TM-AFM investigations were carried out in synthetic air with 60% relative humidity (RH) and 80% RH with 250 ppb SO(2). The samples for the ex-situ SIMS experiments were weathered over a period of 60 h in 80% RH and 250 ppb SO(2). The in-situ TM-AFM investigations have shown that an increasing Zn content in brass increases the corrosion rate.     

The Isocyanide–Cyanide Rearrangement; Mechanism and Preparative Applications

Until recently the isocyanide–cyanide rearrangement was of interest almost solely as an example of a unimolecular gas-phase reaction, and kinetic studies had been carried out in only a few simple cases. Kinetic measurements in solution were made possible only by the discovery and suppression of a parallel free-radical chain process which leads to the same products. The rate of the isomerization is almost independent of the structure of the starting material and of the substituents present. An exception is provided by extreme steric hindrance in three dimensions which, as in tris-α-substituted triptycyl isocyanides, leads to a considerable increase in the activation energy. The results can be interpreted in terms of a purely sigmatropic mechanism, as predicted by ab initio calculations. The preparative application of this rearrangement reaction requires the suppression of side reactions and can best be carried out by flash pyrolysis; yields are then almost quantitative. Allyl isocyanides react without allyl isomerization, optically active isocyanides with complete retention of configuration. New, economically interesting syntheses for the known nonsteroidal anti-inflammatory drugs ibuprofen and (S)-naproxene are described. The application of the useful synthetic building blocks, the optically active β-acyloxy cyanides, which are formed from optically active α-amino acids, will be demonstrated.     

EXAFS Spectroscopy of the Alkoxide Precursor Zr(O n Bu)4 and its Modification in Solution

Summary. The molecular structure of the transition metal alkoxide Zr(OⁿBu)₄ in toluene and its modification by addition of i-propanol, tetrahydrofurane, and the coordinating ligand pentane-1,3-dione (Hacac) were investigated by extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structure (XANES) spectroscopy. Zr(OⁿBu)₄ dissolved in toluene forms dimers. It was proved that cluster size is a function of the number of added equivalents ligand. In contrast, the addition of i-propanol or tetrahydrofurane caused no structural changes observable by EXAFS spectroscopy. A detailed discussion of the structural models is given in terms of possible alternatives and errors within the EXAFS analysis.     

Kristallstruktur und Konformation eines linearen Pentapyrrols

The crystal structure of the pentapyrrin1 was determined by X-ray diffraction methodes at two temperatures (298K and 97K). It is the first structure determination of a linear polypyrrole with more than four pyrrole rings. In the crystal, the molecule is located on a crystallographic two-fold axis, which passes through the central pyrrole ring. It assumes a helical overall-conformation, which is stabilized by intramolecular hydrogen bonding. The acidic proton at the nitrogen atom of the central pyrrolic ring is disordered, being observed with half occupancy at two symmetry-equivalent positions off the crystallographic diad. Attempts to remove the disorder by cooling to 97K were unsuccessful, since no indication for a phase transition was detected.

     

Hierarchical assembly of helicate-type dinuclear titanium(IV) complexes

The ligands 4-7-H(2) were used in coordination studies with titanium(IV) and gallium(III) ions to obtain dimeric complexes Li(4)[(4-7)(6)Ti(2)] and Li(6)[(4/5a)(6)Ga(2)]. The X-ray crystal structures of Li(4)[(4)(6)Ti(2)], Li(4)[(5b)(6)Ti(2)], and Li(4)[(7a)(6)Ti(2)] could be obtained. While these complexes are triply lithium-bridged dimers in the solid state, a monomer/dimer equilibrium is observed in solution by NMR spectroscopy and ESI FT-ICR MS. The stability of the dimer is enhanced by high negative charges (Ti(IV) versus Ga(III)) of the monomers, when the carbonyl units are good donors (aldehydes versus ketones and esters), when the solvent does not efficiently solvate the bridging lithium ions (DMSO versus acetone), and when sterical hindrance is minimized (methyl versus primary and secondary carbon substituents). The dimer is thermodynamically favored by enthalpy as well as entropy. ESI FT-ICR mass spectrometry provides detailed insight into the mechanisms with which monomeric triscatecholate complexes as well as single catechol ligands exchange in the dimers. Tandem mass spectrometric experiments in the gas phase show the dimers to decompose either in a symmetric (Ti) or in an unsymmetric (Ga) fashion when collisionally activated. The differences between the Ti and Ga complexes can be attributed to different electronic properties and a charge-controlled reactivity of the ions in the gas phase. The complexes represent an excellent example for hierarchical self-assembly, in which two different noncovalent interactions of well balanced strengths bring together eleven individual components into one well-defined aggregate.     

Why are olefins oxidized by RuO4 under cleavage of the carbon-carbon bond whereas oxidation by OsO4 yields cis-diols?

Quantum chemical calculations using gradient-corrected (B3LYP) density functional theory have been carried out to investigate the mechanism of the oxidative cleavage of alkenes by ruthenium tetraoxide. The initial reaction of the tetraoxide with the olefin occurs via a [3+2] cycloaddition as in the case of osmium tetraoxide. The results clearly show that the bond cleavage does not take place at the primary adduct, but much later in the reaction path. After the formation of the ruthenium(VI)dioxo-2,5-dioxolane, the reaction proceeds with the addition of a second olefin to yield ruthenium(IV)-bis(2,5-dioxolane), which in turn becomes oxidized first to rutheniumoxo(VI)-bis(2,5-dioxolane) 6(Ru) and then to ruthenium(VIII)-dioxo-bis(2,5-dioxolane) 7(Ru). Only in complexes containing the metal center in the formal oxidation state +VIII are low activation barriers for C-C bond cleavage and exothermic formation of carbonyl compounds as products calculated. The lowest activation barrier, DeltaH(++) = 2.5 kcal/mol, is calculated for the C-C bond breaking reaction of 7(Ru) which is predicted as the pivotal intermediate of the oxidation reaction. The calculations of the oxidation reaction with OsO(4) show that those reactions where the oxidation state of the metal increases have larger activation barriers for M = Ru than for M = Os, while reactions which reduce the oxidation state have a lower activation barrier for ruthenium compounds. Also, reactions which increase the oxidation state of the metal are in the case of M = Os more exothermic than for M = Ru. In this work, all important points of the potential energy surface (PES) are reported, and the complete catalytic cycle for the oxidative cleavage of olefins by ruthenium tetraoxide is presented.     

Quantum chemical investigations and bonding analysis of iron complexes with mixed cyano and carbonyl ligands

The equilibrium structures and vibrational frequencies of the iron complexes [Fe(CN)(x)(CO)(y)](q) (x = 0-6 and y = 0-5) have been calculated at the BP86 level of theory. The nature of the Fe-CN and Fe-CO has been analyzed with an energy partitioning method. The calculated Fe-CO bond lengths are in good agreement with the results of X-ray structure analysis whereas the Fe-CN bonds are calculated somewhat longer than the experimental values. The theoretically predicted vibrational frequencies of the C-O stretching mode are always lower and the calculated CN(-) frequencies are higher than the observed fundamental modes. The results of the bonding analysis suggest that the Fe-CO binding interactions have approximately 55% electrostatic character and approximately 45% covalent character. There is a significant contribution of the pi orbital interaction to the Fe-CO covalent bonding which increases when the complexes become negatively charged. The strength of deltaE(pi) may even be larger than deltaE(sigma). The Fe-CN(-) bonds have much less pi character. The calculated binding energy of the Fe-CO pi-interactions correlates very well with the C-O stretching frequencies.     

Synthesis and use of alpha-silyl-substituted alpha-hydroxyacetic acids

[reaction: see text] Rhodium-catalyzed oxygen transfer was used to generate benzyl 2-silyl-2-oxoacetates in good yields. The hydrogenation of these compounds led to chiral alpha-silyl-substituted alpha-hydroxyacetic acids. Resolution by means of HPLC using a chiral stationary phase afforded an enantiomerically pure representative of this class of compounds, which was successfully applied as a chiral ligand in an asymmetric aldol-type reaction.     

Theory-enforced Re-investigation of the Origin of the Large Metal–Carbon Bond Strength in PdCH2I+ and its reactions with unsaturated hydrocarbons

State-of-the-art ab initio studies demonstrate that the reaction Pd⁺ + CH₃I → PdCH₂I⁺ + H^. is endothermic by ca. 20 kcal/mol, which translates into a bond dissociation energy (BDE) of ca. 83 kcal/mol for the Pd⁺? CH₂I bond. This figure is in agreement with an experimental bracket of 68 kcal/mol < BDE(Pd⁺? CH₂I) < 92 kcal/mol. Based on these findings, the previously studied Pd⁺/CH₃I system was re-investigated, and double-resonance experiments demonstrate that the formation of PdCH₂I⁺ occurs stepwise via PdCH as a reactive intermediate. Further, ion/molecule reactions of PdCH₂I⁺ with unsaturated hydrocarbons are studied, which reveal the formation of carbon–carbon bonds in the gas phase.     

Development of a New Class of Inhibitors for the Malarial Aspartic Protease Plasmepsin II Based on a Central 7‐Azabicyclo[2.2.1]heptane Scaffold

Plasmepsin II (PMII), a malarial aspartic protease involved in the catabolism of hemoglobin in parasites of the genus Plasmodium, and renin, a human aspartic protease, share 35% sequence identity in their mature chains. Structures of 4‐arylpiperidine inhibitors complexed to human renin were reported by Roche recently. The major conformational changes, compared to a structure of renin, with a peptidomimetic inhibitor were identified and subsequently modeled in a structure of PMII (Fig. 1). This distorted structure of PMII served as active‐site model for a novel class of PMII inhibitors, according to a structure‐based de novo design approach (Fig. 2). These newly designed inhibitors feature a rigid 7‐azabicyclo[2.2.1]heptane scaffold, which, in its protonated form, is assumed to undergo ionic H‐bonding with the two catalytic Asp residues at the active site of PMII. Two substituents depart from the scaffold for occupancy of either the S1/S3 or S2′‐pocket and the hydrophobic flap pocket, newly created by the conformational changes in PMII. The inhibitors synthesized starting from N‐Boc‐protected 7‐azabicyclo[2.2.1]hept‐2‐ene ( 6 ; Schemes 1–5) displayed up to single‐digit micromolar activity (IC₅₀ values) toward PMII and good selectivity towards renin. The clear structure? activity relationship (SAR; Table) provides strong validation of the proposed conformational changes in PMII and the occupancy of the resulting hydrophobic flap pocket by our new inhibitors.