Strong intra- and intermolecular aurophilic interactions in a new series of brilliantly luminescent dinuclear cationic and neutral au(I) benzimidazolethiolate complexes

The structural and photophysical properties of a new series of cationic and neutral Au(I) dinuclear compounds (1 and 2, respectively) bridged by bis(diphenylphosphino)methane (dppm) and substituted benzimidazolethiolate (X-BIT) ligands, where X = H (a), Me (b), OMe (c), and Cl (d), have been studied. Monocationic complexes, [A(u2)(micro-X-BIT)(micro-dppm)](CF(3)CO(2)), were prepared by the reaction of [A(u2)(micro-dppm)](CF(3)CO(2))(2) with 1 equiv of X-BIT in excellent yields. The cations 1a-1d possess similar molecular structures, each with a linear coordination geometry around the Au(I) nuclei, as well as relatively short intramolecular Au(I)...Au(I) separations ranging between 2.88907(6) A for 1d and 2.90607(16) A for 1a indicative of strong aurophilic interactions. The cations are violet luminescent in CH(2)Cl(2) solution with a lambda(em)(max) of ca. 365 nm, assigned as ligand-based or metal-centered (MC) transitions. Three of the cationic complexes, 1a, 1b, and 1d, exhibit unusual luminescence tribochromism in the solid-state, in which the photoemission is shifted significantly to higher energy upon gentle grinding of microcrystalline samples with DeltaE = 1130 cm(-1) for 1a, 670 cm(-1) (1b), and 870 cm(-1) (1d). The neutral dinuclear complexes, [A(u2)(micro-X-BIT)(micro-dppm)] (2a-2d) were formed in good yields by the treatment of a CH(2)Cl(2) solution of cationic compounds (1) with NEt(3). 2a-2d aggregate to form dimers having substantial intra- and intermolecular aurophilic interactions with unsupported Au(I)...Au(I) intermolecular distances in the range of 2.8793(4)-2.9822(8) A, compared with intramolecular bridge-supported separations of 2.8597(3)-2.9162(3) A. 2a-2d exhibit brilliant luminescence in the solid-state and in DMSO solution with red-shifted lambda(em)(max) energies in the range of 485-545 nm that are dependent on X-BIT and assigned as ligand-to-metal-metal charge transfer (LMMCT) states based in part on the extended Au...Au...Au...Au interactions.     

Limited stability of the pH reference material sodium tetraborate decahydrate (“borax”)

Thermogravimetric and X-ray powder diffraction analyses revealed that the pH reference material sodium tetraborate decahydrate (“borax”) is not a stable substance but, loosing some of its water of crystallization, transforms slowly into the pentahydrate. The connected pH changes of the solutions are opposite to and larger than, those expected according to the dilution value of the decahydrate as shown by differential potentiometric measurements. The transformation rate depends on the storing time in the closed original container, the time of and after the first exposure of the material to the atmosphere, the frequency of and the relative humidity during subsequent exposures, and the temperature. The transformation reaction is not understood in detail. However, the experiments showed that sodium tetraborate decahydrate is a reliable pH reference material, whose pH is constant within ΔpH=±0.005 within at least two years after preparation, even if occasionally exposed to the atmosphere. Further work will show whether this time limit can be somewhat extended.     

Characterization of a synthetic peroxodiiron(III) protein model complex by nuclear resonance vibrational spectroscopy

The vibrational spectrum of an η(1),η(1)-1,2-peroxodiiron(III) complex was measured by nuclear resonance vibrational spectroscopy and fit using an empirical force field analysis. Isotopic (18)O(2) labelling studies revealed a feature involving motion of the {Fe(2)(O(2))}(4+) core that was not previously observed by resonance Raman spectroscopy.     

Controlled ring‐opening polymerization of L‐lactide and 1,5‐dioxepan‐2‐one forming a triblock copolymer

Novel elastomeric A‐B‐A triblock copolymers were successfully synthesized in a new two‐step process: controlled ring‐opening polymerization of the cyclic ether–ester 1,5‐dioxepan‐2‐one as the amorphous middle block (B‐block) followed by addition and polymerization of the two semicrystalline L ‐lactide blocks (A‐block). A 1,1,6,6‐tetra‐n‐butyl‐1,6‐distanna‐2,5,7,10‐tetraoxacyclodecane initiator system was utilized and the reaction was performed in chloroform at 60 °C. A good control of the synthesis was obtained, resulting in well defined triblock copolymers. The molecular weight and chemical composition were easily adjusted by the monomer‐to‐initiator ratio. The triblock copolymers formed exhibited semicrystallinity up to a content of 1,5‐dioxepan‐2‐one as high as 89% as determined by differential scanning calorimetry. WAXS investigation of the triblock copolymers showed a crystal structure similar to that of the pure poly(L ‐lactide). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1774–1784, 2000     

Design and characterization of libraries of molecular fragments for use in NMR screening against protein targets

We have designed four generations of a low molecular weight fragment library for use in NMR-based screening against protein targets. The library initially contained 723 fragments which were selected manually from the Available Chemicals Directory. A series of in silico filters and property calculations were developed to automate the selection process, allowing a larger database of 1.79 M available compounds to be searched for a further 357 compounds that were added to the library. A kinase binding pharmacophore was then derived to select 174 kinase-focused fragments. Finally, an additional 61 fragments were selected to increase the number of different pharmacophores represented within the library. All of the fragments added to the library passed quality checks to ensure they were suitable for the screening protocol, with appropriate solubility, purity, chemical stability, and unambiguous NMR spectrum. The successive generations of libraries have been characterized through analysis of structural properties (molecular weight, lipophilicity, polar surface area, number of rotatable bonds, and hydrogen-bonding potential) and by analyzing their pharmacophoric complexity. These calculations have been used to compare the fragment libraries with a drug-like reference set of compounds and a set of molecules that bind to protein active sites. In addition, an analysis of the overall results of screening the library against the ATP binding site of two protein targets (HSP90 and CDK2) reveals different patterns of fragment binding, demonstrating that the approach can find selective compounds that discriminate between related binding sites.     

Heterocyclisations des hydroxy-6 methoxy-2 hexene-2 et heptene-2 oates de methyle.

Tetrahydropyran derivatives – and – are formed in good yields by cyclisation of methyl-6-hydroxy-2-hexenoate or 2-heptenoate mediated by various electrophilic reagents (mCPBA, benzeneselenyl chloride, N-bromosuccinimide, iodine). Cyclisations of Z and E isomers are stereospecific. The diastereoselectivity of cyclisation of the secondary alcohol varies with the nature of the electrophilic reagent.     

Threshold photoelectron study of naphthalene, anthracene, pyrene, 1,2-dihydronaphthalene, and 9,10-dihydroanthracene

Threshold photoelectron spectra (TPESs) were obtained for naphthalene, anthracene, pyrene, 1,2-dihydronaphthalene, and 9,10-dihydroanthracene using imaging photoelectron photoion coincidence spectroscopy, from threshold to a photon energy of ～20 eV. Outer valence Green's function calculations at the OVGF∕cc-pVTZ level of theory were used to assign molecular orbitals to the observed TPES features. There is generally good agreement between the predicted and observed bands. Threshold regions for each molecule exhibit vibrational structure which is readily assigned based on previous PES studies. While the measured adiabatic ionization energies (IE(a)) for naphthalene, anthracene, and pyrene are in good agreement with previous works, new values are reported for the two dihydro species (1,2-dihydronaphthalene, 8.010 ± 0.010 eV and 9,10-dihydroanthracene, 8.335 ± 0.010 eV). A comparison is also made with the G3∕∕B3LYP composite method, which consistently overestimates the IE values by 0.06-0.09 eV. The double ionization energies for anthracene and pyrene have been measured to be 19.3 ± 0.2 and 19.8 ± 0.2 eV, respectively.     

Continuous synthesis process of hexagonal nanoplates of P6m ordered mesoporous silica

Hexagonally ordered mesoporous silica coined COK-12 was synthesized in a continuous process by combining streams of sodium silicate and citric acid/sodium citrate buffered solution of (ethylene oxide)(20)-(propylene oxide)(70)-(ethylene oxide)(20) triblock copolymer (Pluronic P123) from separate reservoirs. COK-12 precipitated spontaneously upon combining both streams at nearly neutral pH and ambient temperature. Stable intermediates of the COK-12 formation process could be prepared by limiting sodium silicate addition. Investigation of these intermediates using small-angle X-ray scattering revealed COK-12 formed via an assembly process departing from spherical uncharged core-shell P123-silica micelles. The sterical stabilization of these micelles decreased upon accumulation of silicate oligomers in their shell. Aggregation of the spherical micelles led to cylindrical micelles, which aligned and adopted the final hexagonal organization. This unprecedentedly fast formation of P6m ordered mesoporous silica was caused by two factors in the synthesis medium: the neutral pH favoring uncharged silicate oligomers and the high salt concentration promoting hydrophobic interactions with surfactant micelles leading to silica accumulation in the PEO shell. The easy continuous synthesis process is convenient for large-scale production. The platelet particle morphology with short and identical internal channels will be advantageous for many applications such as pore replication, nanotube or fiber growth, catalytic functionalization, drug delivery, film and sensor development, and in nano dyes as well as for investigation of pore diffusion phenomena.     

Stereoselective organocatalytic one-pot α,α-bifunctionalization of acetaldehyde by a tandem Mannich reaction/electrophilic amination

The first asymmetric organocatalyzed one-pot α,α-bifunctionalization of acetaldehyde with two different electrophiles is described. A diarylprolinol silyl ether-catalyzed reaction of acetaldehyde with an imine and di-tert-butyl azodicarboxylate affords syn-2,3-diaminoalcohols with excellent ee values of up to 98%. This methodology was successfully applied to the synthesis of a chiral α,β-diaminocarboxylic acid.     

Surface-initiated synthesis of poly(3-methylthiophene) from indium tin oxide and its electrochemical properties

Poly(3-methylthiophene) (P3MT) was synthesized directly from indium tin oxide (ITO) electrodes modified with a phosphonic acid initiator, using Kumada catalyst transfer polymerization (KCTP). This work represents the first time that polymer thickness has been controlled in a surface initiated KCTP reaction, highlighting the utility of KCTP in achieving controlled polymerizations. Polymer film thicknesses were regulated by the variation of the solution monomer concentration and ranged from 30 to 265 nm. Electrochemical oxidative doping of these films was used to manipulate their near surface composition and effective work function. Doped states of the P3MT film are maintained even after the sample is removed from solution and potential control confirming the robustness of the films. Such materials with controllable thicknesses and electronic properties have the potential to be useful as interlayer materials for organic electronic applications.