Validation of a robust and rapid liquid chromatography tandem mass spectrometric method for the quantitative analysis of navitoclax

The Bcl-2 family small molecule inhibitor navitoclax is being clinically evaluated to treat multiple cancers including lymphoid malignancies and small cell lung cancer. A sensitive and reliable method was developed to quantitate navitoclax in human plasma using liquid chromatography with tandem mass spectrometry with which to perform detailed pharmacokinetic studies. Sample preparation involved protein precipitation using acetonitrile. Separation of navitoclax and the internal standard, navitoclax-d8, was achieved with a Waters Acquity UPLC BEH C₁₈ column using isocratic flow over a 3 min total analytical run time. A SCIEX 4500 triple quadrupole mass spectrometer operated in positive electrospray ionization mode was used for the detection of navitoclax. The assay range was 5–5,000 ng/ml and proved to be accurate (89.5–104.9%) and precise (CV ≤ 11%). Long-term frozen plasma stability for navitoclax at −70°C was at least 43 months. The method was applied for the measurement of total plasma concentration of navitoclax in a patient receiving a 250 mg daily oral dose.     

Photoactivatable V-Shaped Bifunctional Quinone Methide Precursors as a New Class of Selective G-quadruplex Alkylating Agents

Combining the selectivity of G-quadruplex (G4) ligands with the spatial and temporal control of photochemistry is an emerging strategy to elucidate the biological relevance of these structures. In this work, we developed six novel V-shaped G4 ligands that can, upon irradiation, form stable covalent adducts with G4 structures via the reactive intermediate, quinone methide (QM). We thoroughly investigated the photochemical properties of the ligands and their ability to generate QMs. Subsequently, we analyzed their specificity for various topologies of G4 and discovered a preferential binding towards the human telomeric sequence. Finally, we tested the ligand ability to act as photochemical alkylating agents, identifying the covalent adducts with G4 structures. This work introduces a novel molecular tool in the chemical biology toolkit for G4s.     

New Monomers Tailored for Direct Electrografting onto Carbon in Water

Electrografting, which is an electropolymerization technique dedicated to the chemisorption of polyacrylates onto conductive surfaces, was actively studied in anhydrous organic media until now. This communication aims at extending this technique to aqueous media for the grafting of polyacrylates onto carbon. The key criterion for the successful electrografting under these not very demanding experimental conditions (water vs. anhydrous organic solvents) is the use of amphiphilic acrylic monomers. The impact of the chemical structure of these new monomers on the coating properties was investigated. Composition of the coatings was analyzed by FT‐IR ATR and XPS, whereas film thickness and morphology were analyzed by ellipsometry and AFM, respectively.

     

Electroacoustic miniaturized DNA-biosensor

A micrometer-sized electroacoustic DNA-biosensor was developed. The device included a thin semi-crystalline polyethylene terephthalate (PET) dielectric layer with two Ag microband electrodes on one side and a DNA thiol-labeled monolayer adsorbed on a gold surface on the other. A resonance wave was observed at 29 MHz with a network analyzer, upon AC voltage application between the two Ag electrodes, corresponding to electromechanical coupling induced by molecular dipoles of the PET polymer chain in the dielectric layer. It was found that the device size and geometry were well adapted to detect DNA hybridization, by measuring the capacity of the resonance response evolution: hybridization induced polarization of the dielectric material that affected the electromechanical coupling established in the dielectric layer. The 0.2 mm(2) sensor sensitive area allows detection in small volumes and still has higher detection levels for bioanalytical applications, the non-contact configuration adopted avoids electric faradic reactions that may damage biosensor sensitive layers, and finally, PET is a costless raw material, easy to process and well adapted for large scale production. The well-balanced technological and economic advantages of this kind of device make it a good candidate for biochip integration.     

Vibrational analysis study of aluminum trifluoride phases

The vibrational modes of three solid AlF3 phases (alpha, beta, and amorphous high surface area AlF3) are investigated. Calculations have been performed using hybrid exchange correlation functionals to determine the equilibrium geometries and Gamma-point phonon frequencies for the alpha-AlF3 and beta-AlF3 phases. The calculated optical modes are in excellent agreement with experiment. The IR absorption of the amorphous, glasslike high surface area (HS)-AlF3 is also discussed. Deconvolution of the broad envelope of IR stretches and bending vibrations identifies the components of the observed broad band. From the IR vibrational spectrum it has been shown that both short-range and medium-range disorder are present within HS-AlF3. Structural phase transitions are identified by their phase transition temperature Tc, measured by thermal analysis.     

Electrochemical grafting by reduction of 4-aminoethylbenzenediazonium salt: Application to the immobilization of (bio)molecules

We propose in this study a simple and rapid way to produce stable amino-derivatized conductive surfaces for the subsequent immobilization of (bio)molecules. This was achieved through the use of (4-aminoethyl)benzenediazonium salt (AEBD), which was immobilized on glassy carbon and gold electrodes by its electrochemical reduction. The presence of terminal grafted amino functions was evidenced with XPS by analyzing N1s core level. Besides this conventional surface characterisation, an electrochemical strategy is proposed here to evidence the presence of immobilized amines, in which the chemical reactivity of amines towards 2,4,6-trinitrobenzenesulfonic acid (TNBS) is used. Surface-bound TNBS served as an electrochemical marker and was detected by cyclic voltammetry. Additionally, pre-modified gold electrodes with amino functions can be derivatized with biomolecules such as glutathione (GSH). Glutathione attachment was evidenced by studying the electrochemical behaviour of ferri/ferrocyanide redox before and after its immobilization. The functionalized electrodes were then used for the detection of copper ions in neutral aqueous solutions.     

Simultaneous saccharification and fermentation of pretreated hardwoods

A series of correlations was made between the performance of 15 wood species in simultaneous saccharification and fermentation (SSF) and their respective chemical compositions. A compelling inverse trend (p < 0.001) was demonstrated between the percent conversion of glucan to ethanol during SSF and the Klason lignin content of the wood samples before dilute acid pretreatment. No significant relationships were found between the glucan, xylan, and ash compositions of the native wood samples and ethanol yield. This observation is unique and provides a convenient predictor of biomass conversion efficiency.     

17O NMR Investigation of Chemical Homogeneity in Hybrid Systems

¹⁷O NMR experiments using enriched water were performed to followthe hydrolysis-condensation process of dimethyldiethoxysilanetetraethoxysilane and a 1/1 mixture of dimethyldiethoxysilane andtetraethoxysilane (H₂O/OEt = 0.5; pH = 2). The spectrarecorded over several hours time period were simulated to followquantitatively the variations of residual water, hydroxyl groups(Si–¹⁷ H) and oxo bridges (Si–¹⁷ –Si). Presence of a resonance signal due oxo bridges between di- andtetrafunctional Si units clearly demonstrates that co-condensationreactions occur to a large extent between the two alkoxides, and that thesebonds are stable during the aging period.