Design of organic semiconductors: tuning the electronic properties of pi-conjugated oligothiophenes with the 3,4-ethylenedioxythiophene (EDOT) building block

Hybrid oligothiophenes based on a various combinations of thiophene and 3,4-ethylenedioxythiophene (EDOT) groups have been synthesized. UV/Vis absorption spectra show that the number and relative positions of the EDOT groups considerably affect the width of the HOMO-LUMO gap and the rigidity of the conjugated system. Analysis of the crystallographic structure of two hybrid quaterthiophenes confirms that insertion of two adjacent EDOT units in the middle of the molecule leads to a self-rigidification of the conjugated systems by intramolecular SO interactions. Cyclic voltammetry data shows that the first oxidation potential of the oligomers decreases with increasing chain length and increasing number of EDOT groups for a given chain length. Electrochemical studies and theoretical calculations show that the positions of the EDOT units in the conjugated chain control the potential difference (DeltaE(p)) between the first and second oxidation steps. Moving the EDOT groups from the outer to the inner positions of the conjugated system increases DeltaE(p). Theoretical calculations confirm that this phenomenon reflects an increase of the intramolecular coulombic repulsion between positive charges in the dication. A thin-film field-effect transistor was fabricated by vacuum sublimation of a pentamer with alternating thiophene-EDOT structure, and the hole mobility was determined.     

Formation of disubstituted beta-lactones using bifunctional catalysis

[reaction: see text] Acid chlorides and aromatic aldehydes react in the presence of a stoichiometric amount of a tertiary amine and catalytic amounts of a cinchona alkaloid derivative and a Lewis acid to produce beta-lactones in high diastereo- and enantioselectivity. The sense of the diastereoselectivity depends on the substitution of the acid chloride, with the reactions of aliphatic acid chlorides giving predominantly the trans-isomer and those of alkoxyacetyl chlorides favoring formation of the cis-isomer.     

Fragmentation of trimethoprim and other compounds containing alkoxy-phenyl groups in electrospray ionisation tandem mass spectrometry

This work describes electrospray ionisation tandem mass spectrometry studies of trimethoprim and a series of structurally similar compounds containing alkoxy-phenyl groups; using accurate mass measurement to confirm the proposed fragmentations. Radical cations were observed in the spectra obtained for some of the compounds, as well as uncommon fragmentations showing losses of CH4 and C2H6, whereas other compounds showed the formation of even electron ions. Possible structures for the fragment ions have been proposed and explanations for the different types of fragmentations based on the structures of the compounds. In addition an alternate structure for a fragment ion previously reported for tandem mass spectrometry of trimethoprim has been proposed, based on accurate mass measurement.     

Influence of the aggregation state in solution on the supramolecular organization of adsorbed type I collagen layers

In the last years, adsorbed collagen was shown to form layers with a supramolecular organization depending on the substrate surface properties and on the preparation procedure. If the concentration of collagen and the duration of adsorption are sufficient, fibrillar collagen structures are formed, corresponding to assemblies of a few molecules. This occurs more readily on hydrophobic compared to hydrophilic surfaces. This study aims at understanding the origin of such fibrillar structures and in particular at determining whether they result from the deposition of fibrils formed in solution or from the building of assemblies at the interface. Therefore, type I collagen solutions with an increasing degree of aggregation were prepared, using the “neutral-start” approach, by ageing pH 5.8 solutions at 37 °C for 15 min, 2 or 7 days. The obtained solutions were used to investigate the influence of collagen aggregation in solution on the supramolecular organization of adsorbed collagen layers, which was characterized by X-ray photoelectron spectroscopy and atomic force microscopy. Polystyrene and plasma-oxidized polystyrene were chosen as substrates for the adsorption. The size and the density of collagen fibrils at the interface decreased upon increasing the degree of aggregation of collagen in solution. This is explained by a competitive adsorption process between monomers and aggregates of the solution, turning at the advantage of the monomers. More aggregated solutions, which are thus depleted in free monomers, behave like less concentrated solutions, i.e. lead to a lower adsorbed amount and less fibril formation at the interface. This study shows that the supramolecular fibrils observed in adsorbed collagen layers, especially on hydrophobic substrates, are not formed in the solution, prior to adsorption, but are built at the interface, through the assembly of free segments of adsorbed molecules.     

Fluorometric Determination of Fructose, Glucose, and Sucrose Using Zirconyl Chloride

Zirconyl chloride upon hydrolysis in water to form Zr(OH)⁺ has been found to react to form a fluorescent derivative with not only a ketose such as fructose but also a hexose such as glucose and the disaccharide sucrose. When reaction conditions such as a temperature of 99°C and a time of 60 min are used, detection limits below 1 μg/mL are possible. All three zirconyl–sugar derivatives show very similar absorbance and fluorescence spectra, indicating a common mechanism involving formation of an enediol which can be complexed with ZrOH⁺ is likely. Because the reactivity order is glucose < sucrose < fructose, the reaction can be made selective for fructose at a lower reaction temperature and time such as 60°C at 5 min. Because interference from ascorbic acid and caffeine is also avoided, the fluorescent determination of fructose in soft drink samples after simply a dilution step is possible. We have also employed this reaction for flow injection analysis (FIA) using a polystyrene–divinylbenzene-packed HPLC column as a mixing device. Using a 0.01 M HClO₄ with 1% zirconyl chloride carrier, we obtained a linear calibration curve from 2 to 30 μg/mL with a correlation coefficient of 0.994. A detection limit less than 2 μg/mL was possible. A comparison of results for the FIA of soft drinks with the enzymatic method involving fructose-5-dehydrogenase confirmed the FIA method was quite specific for fructose.     

Validation of a robust and rapid liquid chromatography tandem mass spectrometric method for the quantitative analysis of navitoclax

The Bcl-2 family small molecule inhibitor navitoclax is being clinically evaluated to treat multiple cancers including lymphoid malignancies and small cell lung cancer. A sensitive and reliable method was developed to quantitate navitoclax in human plasma using liquid chromatography with tandem mass spectrometry with which to perform detailed pharmacokinetic studies. Sample preparation involved protein precipitation using acetonitrile. Separation of navitoclax and the internal standard, navitoclax-d8, was achieved with a Waters Acquity UPLC BEH C₁₈ column using isocratic flow over a 3 min total analytical run time. A SCIEX 4500 triple quadrupole mass spectrometer operated in positive electrospray ionization mode was used for the detection of navitoclax. The assay range was 5–5,000 ng/ml and proved to be accurate (89.5–104.9%) and precise (CV ≤ 11%). Long-term frozen plasma stability for navitoclax at −70°C was at least 43 months. The method was applied for the measurement of total plasma concentration of navitoclax in a patient receiving a 250 mg daily oral dose.     

Photoactivatable V-Shaped Bifunctional Quinone Methide Precursors as a New Class of Selective G-quadruplex Alkylating Agents

Combining the selectivity of G-quadruplex (G4) ligands with the spatial and temporal control of photochemistry is an emerging strategy to elucidate the biological relevance of these structures. In this work, we developed six novel V-shaped G4 ligands that can, upon irradiation, form stable covalent adducts with G4 structures via the reactive intermediate, quinone methide (QM). We thoroughly investigated the photochemical properties of the ligands and their ability to generate QMs. Subsequently, we analyzed their specificity for various topologies of G4 and discovered a preferential binding towards the human telomeric sequence. Finally, we tested the ligand ability to act as photochemical alkylating agents, identifying the covalent adducts with G4 structures. This work introduces a novel molecular tool in the chemical biology toolkit for G4s.     

New Monomers Tailored for Direct Electrografting onto Carbon in Water

Electrografting, which is an electropolymerization technique dedicated to the chemisorption of polyacrylates onto conductive surfaces, was actively studied in anhydrous organic media until now. This communication aims at extending this technique to aqueous media for the grafting of polyacrylates onto carbon. The key criterion for the successful electrografting under these not very demanding experimental conditions (water vs. anhydrous organic solvents) is the use of amphiphilic acrylic monomers. The impact of the chemical structure of these new monomers on the coating properties was investigated. Composition of the coatings was analyzed by FT‐IR ATR and XPS, whereas film thickness and morphology were analyzed by ellipsometry and AFM, respectively.