Guanine-thymine intrastrand cross-linked lesion containing oligonucleotides: from chemical synthesis to in vitro enzymatic replication

An intrastrand cross-link lesion, in which two neighboring nucleobases are covalently tethered, has been site-specifically synthesized into defined sequence oligonucleotides in order to perform in vitro replication studies using either bacterial replicative or translesional synthesis polymerases. The investigated tandem base lesion that involves a cross-link between the methylene group of thymine and the C8 of an adjacent guanine residue has been prepared by UV-photolysis under anaerobic condition of the photolabile precursor 5-(phenylthiomethyl)-2'-deoxyuridine that has been site-specifically incorporated into a 9-mer oligonucleotide. After ligation, the lesion-containing modified oligonucleotide was used as a DNA template in primer extension reactions catalyzed by several DNA polymerases including the fragment Klenow exo-(Kf-) of E. coli polymerase I, the Thermus aquaticus polymerase (Taq pol) and the E. coli translesional DNA polymerase Pol IV (dinB). It was found that the primer extension reaction was stopped after the incorporation of the correct nucleotide dAMP opposite the 3'-thymine residue of guanine(C8-CH2) thymine lesion by Kf- and Pol IV; however it was noted that the efficiency of the nucleotide incorporation was reduced. In contrast, the Taq polymerase was totally blocked at the nucleotide preceding the tandem lesion. These results are strongly suggestive that the present intrastrand cross-link lesion, if not repaired, would constitute a blocking lesion for prokaryotic DNA polymerases, being likely lethal for the cell.     

Mixed Oligoureas Based on Constrained Bicyclic and Acyclic β‐Amino Acids Derivatives: On the Significance of the Subunit Configuration for Folding

The combination of a non‐functionalized constrained bicyclo[2.2.2]octane motif along with urea linkages allowed the formation of a highly rigid 2.5_12/14 helical system both in solution and the solid state. In this work, we aimed at developing stable and functionalized systems as promising materials for biological applications in investigating the impact of this constrained motif and its configuration on homo and heterochiral mixed‐oligourea helix formation. Di‐, tetra‐, hexa‐, and octa‐oligoureas alternating the highly constrained bicyclic motif of (R) or (S) configuration with acyclic (S)‐β³‐amino acid derivatives were constructed. Circular dichroism (CD), NMR experiments, and the X‐ray crystal structure of the octamer unequivocally proved that the alternating heterochiral R/S sequences form a stable left‐handed 2.5‐helix in contrast to the mixed (S/S)‐oligoureas, which did not adopt any defined secondary structure. We observed that the (?)‐synclinal conformation around the C_α? C_β bond of the acyclic residues, although sterically less favorable than the (+)‐synclinal conformation, was imposed by the (R)‐bicyclic amino carbamoyl (BAC) residue. This highlighted the strong ability of the BAC residue to drive helical folding in heterochiral compounds. The role of the stereochemistry of the BAC unit was assessed and a model was proposed to explain the misfolding of the S/S sequences.     

3D molecular imaging SIMS

Thin monolayer and bilayer films of spin cast poly(methyl methacrylate) (PMMA), poly(2-hydroxyethyl methacrylate) (PHEMA), poly(lactic) acid (PLA) and PLA doped with several pharmaceuticals have been analyzed by dynamic SIMS using SF₅⁺ polyatomic primary ion bombardment. Each of these systems exhibited minimal primary beam-induced degradation under cluster ion bombardment allowing molecular depth profiles to be obtained through the film. By combing secondary ion imaging with depth profiling, three-dimensional molecular image depth profiles have been obtained from these systems. In another approach, bevel cross-sections are cut in the samples with the SF₅⁺ primary ion beam to produce a laterally magnified cross-section of the sample that does not contain the beam-induced damage that would be induced by conventional focussed ion beam (FIB) cross-sectioning. The bevel surface can then be examined using cluster SIMS imaging or other appropriate microanalysis technique.     

Nano-organized collagen layers obtained by adsorption on phase-separated polymer thin films

The organization of adsorbed type I collagen layers was examined on a series of polystyrene (PS)/poly(methyl methacrylate) (PMMA) heterogeneous surfaces obtained by phase separation in thin films. These thin films were prepared by spin coating from solutions in either dioxane or toluene of PS and PMMA in different proportions. Their morphology was unraveled combining the information coming from X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and water contact angle measurements. Substrates with PMMA inclusions in a PS matrix and, conversely, substrates with PS inclusions in a PMMA matrix were prepared, the inclusions being either under the form of pits or islands, with diameters in the submicrometer range. The organization of collagen layers obtained by adsorption on these surfaces was then investigated. On pure PMMA, the layer was quite smooth with assemblies of a few collagen molecules, while bigger assemblies were found on pure PS. On the heterogeneous surfaces, it appeared clearly that the diameter and length of collagen assemblies was modulated by the size and surface coverage of the PS domains. If the PS domains, either surrounding or surrounded by the PMMA phase, were above 600 nm wide, a heterogeneous distribution of collagen was found, in agreement with observations made on pure polymers. Otherwise, fibrils could be formed, that were longer compared to those observed on pure polymers. Additionally, the surface nitrogen content determined by XPS, which is linked to the protein adsorbed amount, increased roughly linearly with the PS surface fraction, whatever the size of PS domains, suggesting that adsorbed collagen amount on heterogeneous PS/PMMA surfaces is a combination of that observed on the pure polymers. This work thus shows that PS/PMMA surface heterogeneities can govern collagen organization. This opens the way to a better control of collagen supramolecular organization at interfaces, which could in turn allow cell-material interactions to be tailored.     

Squeezing the [Cu-OH...H2O-Cu]3+ bridge by cryptate encapsulation

Treatment of cryptand L(1) with Cu(II) generates a H3O2(-)-bridged dicopper(II) cryptate, 2, where the guest anion has responded to steric constraint by a significant shortening of the O-O distance to 2.325(9) A; computational optimization at the B3LYP/6-31(d) level suggests that the bridging O-H...O H-bond is bent (approximately 157 degrees) but that the barrier to interchange of the bridging H atom is low (<4 kJ mol(-1)). This cryptate, rather than the [Cu2L(1)muCN]3+ species recently claimed to derive from cleavage of the C-C bond of the solvent, is the product of acetonitrile recrystallization of the initially formed reaction product, 1.     

The C-Cl···π interactions inside supramolecular nanotubes of hexaethynylhexamethoxy[6]pericyclyne

Model complexes of hexaethynylhexamethoxy[6]pericyclyne (HM6P) molecules, with or without dichloromethane (DCM) guests, have been calculated at the M05-2X/6-311G(d,p) DFT level. Analysis of nonbonding interactions shows that the cohesion of the supramolecular tubular assemblies previously observed in the crystal state, relies mainly on C-H···O hydrogen bonds between axial ethynyl and equatorial methoxy substituents of stacked HM6P C(18) macrocycles in a cyclohexane-like chair conformation. The intrinsic binding energy of one HM6P molecule with two neighbors is calculated to be more than 40 kcal mol(-1). The inner channel of the stacks (of ca. 8 ? diameter) are suitable for hosting DCM molecules. Using the Atoms In Molecules (AIM) theory, the interaction between DCM molecules and surrounding triple bonds is analyzed in terms of σ-hole-directed C-Cl···π halogen bonds. A σ-hole-directed Cl···Cl interaction between two chlorine atoms of different DCM molecules is also evidenced.     

A ring-fission/C–C bond cleavage reaction with an N-alkyl-N-methyl-N-[(5-phenyl-1,2,4-oxadiazol-3-yl)methyl]amine

The reaction of N-(3,4-dichlorophenethyl)-N-methylamine (1) with 3-chloromethyl-5-phenyl-1,2,4-oxadiazole (2) was investigated. Employment of an equimolar amount of 1 and 2 in the presence of potassium carbonate led to the expected tertiary amine 3 (N-[(3,4-dichlorophenyl)ethyl]-N-methyl-N-[(5-phenyl-1,2,4-oxadiazol-3-yl)methyl]amine), whereas an excess of 1 and prolonged reaction time resulted in ring fission of the oxadiazole system in 3 and finally in the formation of N′-benzoyl-N-[(3,4-dichlorophenyl)ethyl]-N-methylguanidine (4) and N,N′-bis[(3,4-dichlorophenyl)ethyl]-N,N′-dimethylmethanediamine (5). The structures of products 3–5 were determined by means of ¹H and ¹³C NMR-spectroscopy, mass spectrometry and IR-spectroscopy, for 3 (as picrate) and 4 also X-ray structure analysis was employed. A possible mechanism of the reaction pathway leading to compounds 4 and 5 is proposed.     

Dendrimer-functionalized self-assembled monolayers as a surface plasmon resonance sensor surface

We report here a multistep route for the immobilization of DNA and proteins on chemically modified gold substrates using fourth-generation NH(2)-terminated poly(amidoamine) dendrimers supported by an underlying amino undecanethiol (AUT) self-assembled monolayer (SAM). Bioactive ultrathin organic films were prepared via layer-by-layer self-assembly methods and characterized by fluorescence microscopy, variable angle spectroscopic ellipsometry, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and attenuated total internal reflection Fourier transform infrared spectroscopy (ATR-FTIR). The thickness of the AUT SAM base layer on the gold substrates was determined to be 1.3 nm from ellipsometry. Fluorescence microscopy and AFM measurements, in combination with analyses of the XPS/ATR-FTIR spectra, confirmed the presence of the dendrimer/biopolymer molecules on the multilayer sensor surfaces. Model proteins, including streptavidin and rabbit immunoglobulin proteins, were covalently attached to the dendrimer layer using linear cross-linking reagents. Through surface plasmon resonance measurements, we found that sensor surfaces containing a dendrimer layer displayed an increased protein immobilization capacity, compared to AUT SAM sensor surfaces without dendrimer molecules. Other SPR studies also revealed that the dendrimer-based surfaces are useful for the sensitive and specific detection of DNA-DNA interactions. Significantly, the multicomponent films displayed a high level of stability during repeated regeneration and hybridization cycles, and the kinetics of the DNA-DNA hybridization process did not appear to be influenced by surface mass transport limiting effects.