Droplet Sizing by Mie Scattering Interferometry in a Spark Ignition Engine

A theoretical explanation is given of a technique based on Mie scattering interferometry (MSI), obtained by defocusing of the collecting optics, to size droplets. The originality of this study is the development of a droplet sizing method by planar laser light scattering for the case of a scattering angle range close to 90°. The feasibility of this method and its limitations are fully described. The dependence on intensity levels and refractive index variations can be neglected. After discussion of some practical details about particle size, imaging and camera constraints, the results obtained in the combustion chamber of a spark ignition (SI) engine, near the spark plug, prior to ignition and for different injection timings are described and discussed. It can be concluded that the implementation of the MSI method in this experimental set-up has been realized successfully to provide droplet distributions in an SI engine. To allow the easier use of the technique, image processing software will be developed in the Matlab environment.     

Charge-density-wave phase of 1T-TiSe2: the influence of conduction band population

The charge-density-wave phase of TiSe(2) was studied by angle-resolved photoelectron spectroscopy and resistivity measurements investigating the influence of the band gap size and of a varying population of the conduction band. A gradual suppression of the charge-density-wave-induced electronic superstructure is observed for a variation of the band gap in the ternary compounds TiC(x)Se(2-x) with C=(S,Te) as well as for an occupation of only the conduction band by H(2)O adsorption-induced band bending. These observations point to an optimum band gap and support an excitonic driving force for the charge-density wave.     

Probing the negative Wigner function of a pulsed single photon point by point

We investigate quantum properties of pulsed light fields point by point in phase space. We probe the negative region of the Wigner function of a single photon generated by the means of waveguided parametric down conversion. This capability is achieved by employing loss-tolerant photon-number resolving detection, allowing us to directly observe the oscillations of the photon statistics in dependence of applied displacements in phase space. Our scheme is highly mode sensitive and can reveal the single-mode character of the signal state.     

Electroluminescence from a current-emitting nanostructured silicon device

A three-dimensional silicon based nanodevice mainly consisting of two conductive silicon cantilevers was fabricated out of silicon-on-insulator material by electron beam lithography, reactive ion etching, and fluoride based wet chemical etching. One of the cantilevers is bent and sticks to the silicon substrate while the other one is freely suspended. We observed electroluminescence in the visible range when a voltage of any polarity is dropped across both levers. The measured spectra covered the range 400–950 nm peaking at about 650 nm. The current applied to the device could tune the intensity of the electroluminescence spectrum. Light powers ranging from 160 fW to some pW were measured at frequencies up to 17 kHz. The origin of the electroluminescence is discussed in comparison to porous silicon and spark-processed silicon.     

Resonant-cavity-enhanced photodetectors and LEDs in the mid-infrared

In this paper we outline the use of resonant-cavity enhancement for increasing the exterior coupling efficiency of photodetectors and light-emitting diodes (LEDs) in the mid-infrared (MIR) spectral region. This method is potentially very important in the MIR because encapsulation is not presently feasible due to the lack of suitable materials. Among other potential applications, resonant-cavity-enhanced (RCE) photodetectors and LEDs could be particularly suitable for greenhouse gas detection because of their ‘pre-tunable’ spectrally narrowed resonantly enhanced peaks. We also present the optical characterization of an InAs RCE photodetector aimed at the detection of methane gas (λ≈3.3 μm), and an InAs/InAs_0.91Sb_0.09 resonant-cavity LED (RCLED) aimed at carbon dioxide gas (λ≈4.2 μm). The high peak responsivity of the RCE photodetector was 34.7 A/W at λ=3.14 μm, and the RCLED peaked at λ=3.96 μm. These are among the longest operating wavelengths for III–V RCE photodetectors and RCLEDs reported in the literature.     

Fiber-assisted detection with photon number resolution

We report the development of a photon-number-resolving detector based on a fiber-optical setup and a pair of standard avalanche photodiodes. The detector is capable of resolving individual photon numbers and operates on the well-known principle by which a single-mode input state is split into a large number (eight) of output modes. We reconstruct the photon statistics of weak coherent input light from experimental data and show that there is a high probability of inferring the input photon number from a measurement of the number of detection events on a single run.     

Effect of chitosan and thiolated chitosan coating on the inhibition behaviour of PIBCA nanoparticles against intestinal metallopeptidases

Surface modified nanoparticles composed of poly(isobutylcyanoacrylate) (PIBCA) cores surrounded by a chitosan and thiolated chitosan gel layer were prepared and characterized in previous works. The presence of such biopolymers on the nanoparticle surface conferred those nanosystems interesting characteristics that might partially overcome the gastrointestinal enzymatic barrier, improving the oral administration of pharmacologically active peptides. In the present work, the antiprotease behaviour of this family of core–shell nanoparticles was in vitro tested against two model metallopeptidases present in the gastrointestinal tract (GIT): Carboxypeptidase A -CP A- (luminal protease) and Leucine Aminopeptidase M -LAP M- (membrane protease). As previous step, the zinc-binding capacity of these nanoparticles was evaluated. Interestingly, an improvement of both the zinc-binding capacity and the antiprotease effect of chitosan was observed when the biopolymers (chitosan and thiolated chitosan) were used as coating component of the core–shell nanoparticles, in comparison with their behaviour in solution, thanks to the different biopolymer chains rearrangement. The presence of amino, hydroxyl and thiol groups on the nanoparticle surface promoted zinc binding and hence the inhibition of the metallopeptidases analysed. On the contrary, the occurrence of a cross-linked structure in the gel layer surrounding the PIBCA cores of thiolated formulations, due to the formation of interchain and intrachain disulphide bonds, partially limited the inhibition of the proteases. The low accessibility of cations to the active groups of the cross-linked polymeric shell was postulated as a possible explanation of this behaviour. Results obtained in this work make this family of surface-modified nanocarriers promising candidates for the successfull administration of pharmacologically active peptides and proteins by the oral route.     

Ultrafast dynamics and temperature effects on the quantum efficiency of the ring-opening reaction of a photochromic indolylfulgide

The ultrafast ring-opening reaction of the molecular switch 1,2-Dimethyl-3-indolylfulgide dissolved in acetonitrile is investigated by temperature dependent quantum efficiency measurements and time-resolved transient absorption spectroscopy in the ultraviolet and visible spectral range. The photoreaction is found to be thermally activated with an activation energy of about 1640 cm^− 1. The transient absorption signal is bi-exponential with the time constants τ₁ = 0.7 ps and τ₂ = 12 ps. The fast time constant is due to solvation dynamics, while the main component τ₂ is attributed to the excited state lifetime and product formation. A long-lived intermediate state in the photoreaction can be excluded.