The synthesis of dicationic extended bis-benzimidazoles

The synthesis of extended dicationic bis-benzimidazoles starting from trans-1,2-bis(4-cyanophenyl)ethene and trans-1,2-bis(4-cyanophenyl)cyclopropane is reported. The target diamidines show significant in vitro activity against B. subtilis.     

The preparation of 2,6-diaminopyrazine, 2,6-diazidopyrazine and some of their derivatives

A much improved synthesis of the heretofore difficultly obtainable 2,6-diaminopyrazine (4) was afforded by the low-pressure catalytic hydrogenation (palladium on carbon) of 2,6-diazido-pyrazine (2) ; reaction of 2,6-dichloropyrazine (1) and sodium azide gave 2 in 84% yield. The outcome of the reduction was found to be solvent dependent: 1,2-dimethoxyethane containing aqueous ammonia gave 4 in 83% yield; 1,2-dimethoxyethane alone gave 5-aminotetrazolo[1,5-a]-pyrazine (3) in 26% yield. Additional alternative syntheses of 3 and 4 are described. A number of acyl and azo derivatives of 4 were prepared. Reactions of 2 with dimethyl acetylenedicarboxylate and ethyl acetate (base catalyzed) leading to vic-triazole derivatives are also described.     

Role of the spacer in the singlet-singlet energy transfer mechanism (Förster vs Dexter) in cofacial bisporphyrins

The cofacial bisporphyrins H4DPS (DPS = 4,6-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]dibenzothiophene), H4DPO (DPO = 4,6-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]dibenzofuran), H4DPX (DPX = 4,5-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]-9,9-dimethylxanthene), H4DPA (DPA = 1,8-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]anthracene), and H4DPB (DPB = 1,8-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]biphenylene) have been monometalated by Zn(OAc)2.2H2O and by GaCl3 to explore the singlet-singlet energy transfer from the photoexcited metal porphyrin center to the linked free base porphyrin. The spectroscopic (UV-vis and fluorescence) and photophysical properties (fluorescence lifetimes, tauF, and quantum yields, phiF) have been investigated at 298 and 77 K in degassed 2-MeTHF for the donor-acceptor systems, (Zn)H2DPS, (Zn)H2DPO, (Zn)H2DPA, (Zn)H2DPX, and (Zn)H2DPB, as well as for the bis-zinc complexes, (Zn)2DPS, (Zn)2DPO, (Zn)2DPX, and (Zn)2DPB, respectively, and the monoporphyrin derivatives, H2P, (Zn)P, and (Ga-OMe)P (P2- = 5-phenyl-2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrin-dianion). The singlet-singlet energy transfer rate constants (KET) were obtained using KET = (1/tauF -1/tauFo), where tauFo is the fluorescence lifetime of the corresponding bis-zinc(II) systems (or (Zn)P and (Ga-OMe)P) where no energy transfer occurs. The tauF value for three bis-zinc(II) compounds varies from 1.69 to 2.01 ns and is 1.84 (at 298 K) and 3.20 ns (at 77 K) for (Ga-OMe)P. In the donor-acceptor bismacrocycles, depending on the spacer and the temperature, the fluorescence lifetimes decrease down to 50-240 ps. The KET values range from approximately 4 to approximately 21 (ns(-1)) and have been analyzed considering both the F?rster and the Dexter mechanisms. Using the C(meso)-C(meso) distance parameters in the calculations, the F?rster and Dexter mechanisms operate for DPS and DPO, and for DPA, DPX, and DPB spacer systems, respectively. The limit distance where one mechanism dominates over the other is estimated to be around 5-6 A.     

Adsorption of Molybdenum on Titania from Aqueous Solutions

The adsorption of Mo from dilute aqueous solutions (10(-3) to 3x10(-2) M) is effected on three samples of titania, two are anatase and the third is P25, which is composed of rutile and anatase. The adsorption isotherms at 298, 318, and 338 K are analyzed using a Langmuir linear equation. The isotherms on P25 showed a distinct inflection point that is reproduced by two linear portions, indicating different adsorption regimes. This adsorption behavior is explained as follows: with low amount adsorbed the adsorption is initiated by protonation of the basic hydroxyls on which the negatively charged MoO(4)(2-')s are adsorbed, and this is accompanied by an increase in the pH of the impregnating solution. At higher adsorption the coordinatively unsaturated Ti(4+) sites participate in the process, leading to a decline in the initial increase in pH. In the case of the two anatase samples the low surface area resulted in poor distribution of adsorption sites; consequently, the distinction between the two modes of adsorption was not entirely clear. The higher adsorption site density in the case of anatase is accompanied by a lower surface coverage, θ, than that for P25. The heat of adsorption, Q, on the three titania samples showed a linear increase with θ, which is represented by the regression equation: -Q=95.77θ-4.25 (R(2)=0.993). Copyright 2001 Academic Press.     

Formation of disubstituted beta-lactones using bifunctional catalysis

[reaction: see text] Acid chlorides and aromatic aldehydes react in the presence of a stoichiometric amount of a tertiary amine and catalytic amounts of a cinchona alkaloid derivative and a Lewis acid to produce beta-lactones in high diastereo- and enantioselectivity. The sense of the diastereoselectivity depends on the substitution of the acid chloride, with the reactions of aliphatic acid chlorides giving predominantly the trans-isomer and those of alkoxyacetyl chlorides favoring formation of the cis-isomer.     

Minimization of water vapor interference in the analysis of non-methane volatile organic compounds by solid adsorbent sampling

Water vapor can be a significant interference in the analysis of air for non-methane volatile organic compounds (NMVOCs) using solid-adsorbent sampling techniques. The adsorbent materials used in sampling cartridges have different hydrophobic characteristics, and it is therefore necessary to characterize solid-adsorbent cartridges over a wide range of humidity. Controlled humidity experiments were performed to assess the extent of water vapor interference when samples are collected onto AirToxics solid-adsorbent cartridges. It was found that elevating the temperature of the cartridge to 10 degrees C above the temperature of the air sample greatly reduced water vapor adsorption and interferences and resulted in > or = 90% recovery of NMVOCs, biogenic VOCs and chlorofluorocarbons. Similar collection efficiencies were obtained at ambient temperature by reducing the relative humidity to > or = 60% in the sample by dilution with dry, scrubbed ambient air. A procedure also was developed and optimized for dry-purging cartridges prior to analysis. However, under optimized conditions, significant losses of C3-C5 compounds still occurred under highly humid conditions. It was determined that these losses were due to reduced retention during sampling rather than loss during the dry purge procedure. The dry purge method was shown to be adequate at high humidities for sampling NMVOCs with retention indices greater than 500.     

Understanding the factors controlling the photo-oxidation of natural DNA by enantiomerically pure intercalating ruthenium polypyridyl complexes through TA/TRIR studies with polydeoxynucleotides and mixed sequence oligodeoxynucleotides

Ruthenium polypyridyl complexes which can sensitise the photo-oxidation of nucleic acids and other biological molecules show potential for photo-therapeutic applications. In this article a combination of transient visible absorption (TrA) and time-resolved infra-red (TRIR) spectroscopy are used to compare the photo-oxidation of guanine by the enantiomers of [Ru(TAP)₂(dppz)]²⁺ in both polymeric {poly(dG-dC), poly(dA-dT) and natural DNA} and small mixed-sequence duplex-forming oligodeoxynucleotides. The products of electron transfer are readily monitored by the appearance of a characteristic TRIR band centred at ca. 1700 cm⁻¹ for the guanine radical cation and a band centered at ca. 515 nm in the TrA for the reduced ruthenium complex. It is found that efficient electron transfer requires that the complex be intercalated at a G-C base-pair containing site. Significantly, changes in the nucleobase vibrations of the TRIR spectra induced by the bound excited state before electron transfer takes place are used to identify preferred intercalation sites in mixed-sequence oligodeoxynucleotides and natural DNA. Interestingly, with natural DNA, while it is found that quenching is inefficient in the picosecond range, a slower electron transfer process occurs, which is not found with the mixed-sequence duplex-forming oligodeoxynucleotides studied.

Efficient electron transfer requires the complex to be intercalated at a G-C base-pair. Identification of preferred intercalation sites is achieved by TRIR monitoring of the nucleobase vibrations before electron transfer.     

Validation of a simple, sensitive method for the determination of beta-estradiol in bovine urine using gas-chromatography negative-ion chemical ionization mass spectrometry

A new method is presented for the analysis of 17[small beta]-estradiol in bovine urine. After deconjugation, the sample is cleaned up using an OASIS[trade mark sign] HLB disposable cartridge and extracted into 1-chlorobutane. The hormone is derivatized using pentafluorobenzoyl chloride. The derivatized estradiol is quantitated using gas-chromatography negative-ion chemical ionization mass spectrometry. Calibrations, obtained using spiked blank urine, are linear in the range of 100-1000 pg mL(-1) with CC[small alpha] approximately 170 pg mL(-1) and CC[small beta] of 287 pg mL(-1). Recoveries are in the range of 80 to 130%. The method is rugged, rapid and sensitive when compared to other hormone methods.     

The effect of octyl glucoside on the lamellar phase of diluted C12E4 and alcohol systems

A systematic study on phase behavior of the mixture of nonionic surfactants with alcohols at 30.0+/-0.1 degrees C was carried out. The total surfactant concentration was kept to 0.1 M varying the mole ratio of n-octyl beta-d-glucopyranoside (OG) and tetraethylene glycol monododecyl ether. Two uniphasic regions were found, the lamellar phase at low OG mole fraction and micelles at high OG mole fraction. The presence of OG favors the lamellae-micelle transition. Alkanols and benzyl alcohol were used as cosurfactants. The more hydrophobic alcohols (octanol and decanol) increase the OG content in the mixed bilayers. On the contrary, benzyl alcohol is not as favorable to the OG incorporation in the lamellar phase as in the mixed micelles. The L(3) phase has only been found as a uniphasic region with hexanol.     

Multifunctional behavior by a Bis-(phosphinimino)methanide ligand: eta 2- vs eta 3-coordination vs Bronsted basicity

The reaction of [(Cymene)RuCl2]2 with the chelate LiHC(PPh2NPh)2 occurs to remove both chloride ligands, to furnish a cationic Ru(II) complex with the monoanionic ligand bound eta3, through two N and an sp3 carbon. This cation is also produced from the conjugate acid of the ligand H2C(PPh2NPh)2 because this molecule can serve as a Br?nsted base, to deprotonate the acidic carbon of another molecule of H2C(PPh2NPh)2. DFT calculations show an energy surface where (Cymene)RuHC(PPh2NPh)2L is more stable with a Ru-CH(PPh2NPh)2 bond and with L = Cl- or MeCN not coordinated to Ru, than to an eta2-HC(PPh2NPh)2 structure with coordinated L; this is tested experimentally. The greater tendency for this ligand to be coordinated eta3 vs analogous diketiminates is discussed. The nucleophilicity of Cgamma in structure 1, vs that of donors L = Cl- or MeCN, is evaluated to understand the preference of the bis(phosphinimino)methanide to be bidentate or tridentate.