The Formation of Porous Membranes by Filtration of Aerosol Nanoparticles

Flame-generated aerosol particles of Al₂O₃ were deposited by gas filtration on two types of porous and ceramic tubes of -Al₂O₃ with mean pore diameters of 450 and 2700nm, respectively. The particles were aggregates with average mobility diameters in the range of 30–100nm and primary particle diameters of 4–8nm. The particles are characterized by differential mobility analysis, transmission electron microscopy, and by their specific surface area. The deposited membranes are characterized by gas permeability measurements, scanning electron microscopy, and by their pore size distribution from nitrogen capillary condensation. The particles form a distinct, homogeneous membrane layer with a porosity of 90% on top of the substrate surface and only penetrate slightly into the substrate structure. The mean pore sizes of the deposited membranes determined by nitrogen condensation agree approximately with those determined by gas permeation and the specific surface area. The mean pore diameter varies in the range of 30–70nm. The gas permeability of the deposited membranes is related to the specific surface area but influenced by the high porosity. The mean pore size and the permeability of the membranes are almost independent of the substrate structure.The development of a membrane with uniform properties is preceded by a short initial period in which the deposited particles, with an equivalent membrane thickness of roughly 2m, have a significantly lower permeability than the ultimately developed uniform membrane layer. This effect is particularly significant for the aerosol particles with the lowest mean size, probably due to particles deposited in the pore mouths of the substrate.The particles and the deposited membranes are X-ray amorphous but retain their specific surface area on heating to even high temperatures. When the membranes are heated to 1473K for 10h, X-ray diffraction shows a mixture of - and -alumina, accompanied by a partial disintegration of the membrane and a considerable loss of surface area.     

Long-term neprilysin gene transfer is associated with reduced levels of intracellular Abeta and behavioral improvement in APP transgenic mice

Background  

Proteolytic degradation has emerged as a key pathway involved in controlling levels of the Alzheimer's disease (AD)-associated amyloid-β (Aβ) peptide in the brain. The endopeptidase, neprilysin, has been implicated as a major Aβ degrading enzyme in mice and humans. Previous short and intermediate term studies have shown the potential therapeutic application of neprilysin by delivering this enzyme into the brain of APP transgenic mice using gene transfer with viral vectors. However the effects of long-term neprilysin gene transfer on other aspects of Aβ associated pathology have not been explored yet in APP transgenic mice.     

Substituted phenylcyclohexanes and cyclohexylcyclohexanes two new classes of liquid crystals as anisotropic solvents in optical absorption spectroscopy

The suitability of nematic phenylcyclohexanes and cyclohexylcyclohexanes as solvents for linear dichroism measurements has been investigated. Especially the cyclohexylcyclohexanes orient solute molecules very well and they are broadly applicable, because their absorption edge lies below 200 nm.     

Analysis of HRTEM images for carbon nanostructure quantification

Image processing algorithms have been developed to extract fringe length, tortuosity and separation from high resolution transmission electron microscopy images. To validate the separation algorithm, a comparison is made between the image-based fringe separation and that obtained by analysis of X-ray diffraction data for a progressively heat-treated carbon black. Agreement is favorable. To illustrate the utility of the analysis parameters for a range of carbon nanostructures, analysis is applied to a series of pyrolytically prepared carbon soots – qualitatively described as containing amorphous, graphitic or fullerenic nanostructure. For all processing, the intermediate image, in the form of a skeletonized binary image of the original high resolution transmission electron micrograph, is shown and found to accurately reflect the nanostructural organization within the carbon as visually observed. Statistical results for each analysis parameter, extracted from the binary images, are presented in the form of histograms and quantitatively distinguish the different carbon nanostructures.     

Molecular structure of Hf(BH4)4 investigated by quantum mechanical calculations and gas-phase electron diffraction

The structure of the gaseous hafnium tetrakis(tetrahydroborate) molecule, Hf(BH4)4, has been investigated by detailed quantum mechanical calculations and by analysis of its gas electron-diffraction (GED) pattern. The ground-state geometry possesses T symmetry with all of the triply-bridged BH4 groups twisted equally about the Hf...B-H axes. Salient structural parameters (ra distances, r angles) deduced from the GED pattern by the SARACEN method were: r(Hf...B) 231.4(2), r(Hf-Hb) 221.5(7), r(B-Hb) 127.6(5), r(B-Ht) 121(1) pm, Hf...B-Hb 69.4(3), Hb-B-Hb 108.4(4), Hb-B-Ht 110.6(3), B...Hf...B-Hb 166(1) degrees. A notable feature is the large magnitude of the Hf...B and Hf-Hb anharmonicity parameters, attributed to the fluxional hydrogen atom exchange process. The properties are compared with those of related tetrahydroborates..     

The influence of water content, cooling and warming rate upon survival of embryonic axes of Poncirus trifoliata (L.)

The present study investigated the relative contributions of water content and non-equilibrium cooling and warming rates to the survival of cryopreserved axes of recalcitrant P. trifoliata seeds. Reducing water contents from 1.7 and 0.26 g water per g dry mass is believed to increase cytoplasmic viscosity. Cooling to -196 degree C was done at rates averaging between 0.17 and 1300 degree C per second, and warming at 600 or 1.35 degree C per second. Survival was assessed after 4 weeks in vitro. Rapid warming resulted in higher survival and normal development of axes at all water contents. The effects of cooling rate were dependent on the water content of axes. Cooling rates resulting in >70 percent normal development ranged between 0.17 and about 1300 degree C per second for axes at a water content of 0.26 g water per g dry mass narrowing with increasing hydration to an apparent optimum at about 686 degree C per second in axes at 0.8 g water per g dry mass At 1.7 g water per g dry mass, axes cooled at 0.17 degree C per second yielded nearly 40 percent normal development, whereas faster cooling was deleterious. Results are interpreted in the context of the effect of water content on cytoplasmic viscosity and the rate of intracellular ice formation. At low water contents, the high intracellular viscosity slows ice crystallization making survival independent of cooling rate. At higher water contents, the reduced viscosity requires faster cooling to prevent ice crystal damage. The ability to cool rapidly with increasing hydration is balanced with an increasing limitation to dissipate heat fast enough to prevent severe damage.     

Polymer-supported pyridine-bis(oxazoline). Application to ytterbium-catalyzed silylcyanation of benzaldehyde

[reaction: see text] Terminal acetylenes containing hydroxy and carboxylic acid groups were subjected to Sonogashira coupling with 4-bromo-2,6-bis[(R)-4-phenyloxazolin-2-yl]pyridine and the resulting pybox derivatives were immobilized on Tentagel resins. Ytterbium(III) chloride complexes of the polymeric ligands catalyzed the addition of trimethylsilyl cyanide to benzaldehyde with 80-81% ee. The ligands were reused more than 30 times without any loss in selectivity or activity, and the metal complexes could be recovered and reused at least four times, although with slightly decreasing activity.     

Synthesis and functionalization study of hierarchical ZnO nanowires for potential nitroaromatic sensing applications

In this work, we synthesize hierarchical ZnO nanowires in a customized atmospheric CVD furnace and investigate their surface modification behavior for prospective nitroaromatic sensing applications. The morphology and crystal structure of pristine nanowires are characterized through FE-SEM, TEM, X-ray diffraction and EDAX studies. Photoluminescence behavior of pristine nanowires is also reported. Surface modification behavior of synthesized nanowires on a ZnO–oleic acid system is studied by utilizing Raman and FT-IR spectroscopy. Based on these findings, 1-pyrenebutyric acid (PBA) has been identified as an appropriate fluorescent receptor for sensing p-nitrophenol. Fluorescence quenching experiments on a PBA–p-nitrophenol system are reported and a detection limit of up to 28 ppb is envisaged for PBA-grafted ZnO nanowire-based optical sensor.