Microanalytical method development for Fe, Cu and Zn determination in colorectal cancer cells

Microanalytical methods suitable for the determination of Fe, Cu in HT-29 (human colon adenocarcinoma) cells treated with different iron compounds (Fe(II) sulfate, Fe(III) chloride, Fe(III) citrate and Fe(III) transferrin) and cultured in medium supplemented or not with 10% (v/v) fetal calf serum (FCS) by total reflection X-ray fluorescence spectrometry (TXRF) and simultaneous graphite furnace atomic absorption spectrometry (GF-AAS) were developed. The developed TXRF method was also suitable for Zn determination in the samples. The main advantage of the proposed methods is the execution of all sample preparation steps following incubation and prior to the elemental analysis in the same Eppendorf tubes. Sample preparation was performed at microscale (115 μL sample volume) with 65% nitric acid and 30% hydrogen peroxide. According to scanning electron microscopic measurements, the organic matrix of the cell samples could be eliminated to the extent that accurate results were obtained for Cu and Fe by analyzing the same samples by TXRF and GF-AAS. Concerning the iron uptake, HT-29 cells incubated in FCS-free medium contained Fe in cca. 5-50 times higher amounts compared to cells cultured in FCS supplemented medium. Pronounced differences in the iron uptake compared to the iron supply (inorganic vs. organic chelated as well as iron(II) vs. iron(III)) were observed in the case of cell lines incubated in FCS-free medium.     

Magnetic and structural investigation of Mn(2+)-doped ZnSe semiconductor nanoparticles.

X-ray magnetic circular dichroism (XMCD) experiments on diluted magnetic semiconductor nanocrystals were carried out to study the local electronic structure and magnetic properties of Mn(2+) embedded in the lattice of ZnSe nanoparticles. It is shown that Mn(2+) is exclusively present in the bulk of ZnSe nanoparticles. Neither Mn-Mn coupling nor traces of oxidation to higher Mn oxidation states was observed. This result, which is consistent with EPR spectroscopic data, provides clear proof of the location of Mn(2+) in semiconductor nanoparticles. Further, it is shown that the magnetic ions are highly polarised inside the nanocrystals, where they reach about 50 % of the theoretical value of a pure d(5) state under identical conditions.     

Tensile strengths and Young’s modulus of thin copper and copper-nickel (CuNi44) substrates

In this paper we report a method to determine tensile strengths and Young’s modulus of cubic biaxial textured metal tapes used as substrate materials for coated conductors (CC). Simplicity, rapidity and reproducibility of the procedure are important for the evaluation of continuous in-house productions. Our approach is based on the EN 10002-1 B tensile test method. A key role for satisfactory results is the sample preparation of 100–250 μm thick tapes, which will be described in detail. Copper (E-Cu57) can be successfully transformed to cubic biaxial textured substrates. Best results were achieved by annealing between 750°C and 850°C in reducing atmosphere. Best FWHM values for the ψ scan are 5.51° and for the ϕ scan are 4.5°. Pole figure analysis verified the sharp {001} <100> texture of the tape. Vickers hardness measurements (HV 0.1) for the cold worked material yielded values of 135 and for the annealed tape, values of 37. The ultimate tensile yield strength Rm of the textured substrate is 150 MPa and thus significantly lower than that for the cold worked material (413 MPa). Cubic biaxial substrates could be manufactured from Isotan CuNi44 (WM49) bars. Best results were achieved by annealing at 1200°C in reducing atmosphere. Pole figure analysis verified the {001} <100> texture with other low intensity texture components. Vickers hardness measurements (HV 0.1) for the cold worked material yielded values of 236 and for the annealed tape values of 92. The ultimate tensile yield strength R _m of the textured substrate is 300 MPa and thus significantly lower than that for the cold worked material (723 MPa).      

Synthesis of a Sialic Acid Containing Complex‐Type N‐Glycan on a Solid Support

On solid ground : A new solid‐phase synthesis of N‐linked glycans featuring 1) highly stereoselective β‐mannosylation and microfluidic α‐sialylation and 2) efficient glycosylation of the N‐phenyltrifluoroacetimidate units on JandaJel resin is reported. Reagent concentration effects by a fluorous solvent are effectively applied, and the use of these methods results in the first synthesis of a sialic acid containing complex‐type N‐glycan on a solid support.

     

Large-scale synthesis of uniform and extremely small-sized iron oxide nanoparticles for high-resolution T1 magnetic resonance imaging contrast agents

Uniform and extremely small-sized iron oxide nanoparticles (ESIONs) of < 4 nm were synthesized via the thermal decomposition of iron-oleate complex in the presence of oleyl alcohol. Oleyl alcohol lowered the reaction temperature by reducing iron-oleate complex, resulting in the production of small-sized nanoparticles. XRD pattern of 3 nm-sized nanoparticles revealed maghemite crystal structure. These nanoparticles exhibited very low magnetization derived from the spin-canting effect. The hydrophobic nanoparticles can be easily transformed to water-dispersible and biocompatible nanoparticles by capping with the poly(ethylene glycol)-derivatized phosphine oxide (PO-PEG) ligands. Toxic response was not observed with Fe concentration up to 100 μg/mL in MTT cell proliferation assay of POPEG-capped 3 nm-sized iron oxide nanoparticles. The 3 nm-sized nanoparticles exhibited a high r(1) relaxivity of 4.78 mM(-1) s(-1) and low r(2)/r(1) ratio of 6.12, demonstrating that ESIONs can be efficient T(1) contrast agents. The high r(1) relaxivities of ESIONs can be attributed to the large number of surface Fe(3+) ions with 5 unpaired valence electrons. In the in vivo T(1)-weighted magnetic resonance imaging (MRI), ESIONs showed longer circulation time than the clinically used gadolinium complex-based contrast agent, enabling high-resolution imaging. High-resolution blood pool MR imaging using ESIONs enabled clear observation of various blood vessels with sizes down to 0.2 mm. These results demonstrate the potential of ESIONs as T(1) MRI contrast agents in clinical settings.     

Vortex-assisted tryptic digestion

The effect of vortex‐induced vibration during tryptic digestion was investigated by applying different vibrational speeds (0, 600, 1200, or 2500 rpm) to digestion solutions for varying durations (10, 20, 30, 40, or 60 min) at two different incubation temperatures (25°C or 37°C). The most rapid digestion was observed with the highest vibrational speed and temperature. With the application of 2500 rpm at 37°C, the tryptic digestion of each of three standard proteins (cytochrome c, myoglobin, or bovine serum albumin) provided complete disappearance of the protein within 60 min, as determined by matrix‐assisted laser desorption/ionization mass spectrometry. Compared to conventional overnight digestion, 60‐min vortex‐assisted tryptic digestion generated longer peptides, due primarily to the limited digestion time and provided better sequence coverages (89% vs. 78% for cytochrome c, 100% vs. 87% for myoglobin, and 38% vs. 26% for BSA). The longer peptides should be advantageous to analytical methods such as the middle‐down approach that benefit from increased sequence coverage of proteins. Vortex‐assisted tryptic digestion is expected to be a useful method for rapid tryptic digestion of proteins. Copyright © 2010 John Wiley & Sons, Ltd.     

Comparison of the oxygen and hydrogen isotopes in the juices of fast-growing vegetables and slow-growing fruits

We have analyzed the oxygen and hydrogen isotopic composition of juices from fruits and vegetables collected from a small orchard in order to investigate the differences in isotopic enrichment and evaporation intensity between fast-growing vegetables and slow-growing fruits grown under the same climatic conditions. The oxygen and hydrogen isotope levels were much higher in the juices of the fruits and vegetables than in the source waters in which they grew because of evaporation effects. According to our data, fast-growing vegetables are subject to greater evaporation than slow-growing fruits. An evaporation experiment using the source water showed that the oxygen and hydrogen isotopic composition of the 60-80% residual fraction was similar to that of the isotopically enriched grape juice, whereas those of the plume and tomato juices were very close to that of the 80-90% residual fraction, thus proving the effect of evaporation. Copyright (c) 2008 John Wiley & Sons, Ltd.     

Ultrahigh-pressure dual online solid phase extraction/capillary reverse-phase liquid chromatography/tandem mass spectrometry (DO-SPE/cRPLC/MS/MS): a versatile separation platform for high-throughput and highly sensitive proteomic analyses

Capillary RPLC/ESI-MS (cRPLC/ESI-MS) is one of the most powerful analytical tools for current proteomic research. The development of cRPLC techniques coupled online to a mass spectrometer has focused on increasing the separation efficiency, detection sensitivity, and throughput. Recently, the use of high-pressure (over 10,000 psi) LC systems that utilize long, small inner diameter capillary columns has gained much attention for proteomic analyses. In this study, we developed an ultrahigh-pressure dual online SPE/capillary RPLC (DO-SPE/cRPLC) system. This LC system employs two online SPE columns and two capillary columns (75 microm inner diameter x 1 m length) in a single separation system, and has a maximum operating pressure of 10,000 psi. This DO-SPE/cRPLC system is capable of providing high-resolution separation in addition to several other advantageous features, such as high reproducibility in terms of the LC retention time, rapid sample injection, online desalting, online sample enrichment of dilute samples, and increased throughput as a result of essentially removing the column equilibration time between successive experiments. We coupled the DO-SPE/cRPLC system online to a tandem mass spectrometer to allow high-throughput proteomic analyses. In this paper, we demonstrate the efficiency of this DO-SPE/cRPLC/MS/MS system by its use in the analyses of proteomic samples exhibiting different levels of complexity.     

Two-dimensional breakdown characteristics of PDP cells for varyinggeometry

Equipotential and electron-density contours for various cell geometries from two-dimensional fluid simulation are presented during a single pulse for plasma display panel cells for varying geometry without a dielectric layer. One of the code validations is provided by the Paschen breakdown for a large parallel-plate case     

Partial molal heat capacities of aqueous tetraalkylammonium bromides as functions of temperature

Enthalpies of solution have been measured from 5 to 85°C for aqueous tetraethyl- and tetrapropylammonium bromides, and the integral heat method is employed to evaluate for these electrolytes over a wide temperature range. Data taken from the literature have been used to evaluate for aqueous Bu₄NBr over a similar temperature range. These data, along with similar data for Me₄NBr, previously reported, have been used to evaluate absolute ionic heat capacities. While the absolute values agree only qualitatively with two other methods of division, the temperature dependences of the three methods essentially agree up to 65°C. Heat capacities due to structural effects on the solvent, obtained by subtracting the inherent heat capacities of the ions, are extraordinarily positive for all four tetraalkylammonium ions and have negative temperature coefficients, indicating that all four ions, including the tetramethylammonium ion, are structure-making ions.